KARCHER G 2900 E High Pressure Washer Instruction Manual
- June 10, 2024
- Karcher
Table of Contents
- MODEL OVERVIEW
- HIGH PRESSURE WASHER OPERATOR MANUAL
- CUSTOMER SERVICE
- IMPORTANT SAFETY INSTRUCTIONS
- ASSEMBLY INSTRUCTIONS
- OPERATING INSTRUCTIONS
- USING THE ACCESSORIES
- WORKING WITH DETERGENTS
- SHUTTING DOWN & CLEAN-UP
- WINTERIZING AND LONG-TERM STORAGE
- MAINTENANCE INSTRUCTIONS
- CLEANING TIPS
- TROUBLESHOOTING
- WARRANTY INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
G 2900 E High Pressure Washer
Instruction Manual Register your product
www.kaercher.com/welcome
MODEL OVERVIEW
1 Handle | 9 Oil Dipstick |
---|---|
2 Spray gun | 10 Water inlet for garden hose |
3 Spray gun safety lock | 11 High pressure outlet |
4 High pressure hose | 12 Spark plug |
5 Spray wand | 13 Water inlet filter (installed in pump) |
6 Quick connect nozzles | 14 On/Off Switch |
7 Knob | 15 Strap |
8 Fuel Tank |
HIGH PRESSURE WASHER OPERATOR MANUAL
Model Overview | 2 |
---|---|
Important Safety Instructions | 5 |
Assembly Instructions | 7 |
Operating Instructions | 9 |
Using the Accessories | 10 |
Working With Detergents | 11 |
Taking a Break | 12 |
Shutting Down & Clean-Up | 12 |
Winterizing and Long-Term Storage | 12 |
Maintenance Instructions | 13 |
Cleaning Tips | 13 |
Troubleshooting | 15 |
Warranty Information | 17 |
Specifications
G 2900 E
Max Pressure| 2900 PSI
Max Water Flow| 2.6 GPM
Detergent Suction| 0.04 GPM
Engine| Karcher KPS 196cc
Fuel Type| Unleaded Gasoline
Fuel Tank Size| 0.8 gal
Engine Oil Type| SAE 10W-30
Engine Oil Capacity| 0.15 gal
Part No.| 1.107-414.0
Nozzle – Yellow, 15 deg| 2900 PSI at 2.4 GPM
Nozzle – Green, 25 deg| 2700 PSI at 2.5 GPM
Nozzle – White, 40 deg| 2300 PSI at 2.6 GPM
Nozzle – Black, 60 deg| 400 PSI at 2.8 GPM
Nozzle kit Part No.| 8.758-924.0
Proper Use
This high-pressure cleaner is designed:
- To clean machines, vehicles, buildings, tools, facades, decks, patios, driveways, walkways, garden equipment etc. (detergents may be required in some cleaning scenarios).
- To be used with accessories, replacement parts and detergents approved by KÄRCHER. Observe the instructions provided with these detergents.
Owner/User Responsibility
The packing material can be recycled.
Please do not place the packaging into the ordinary refuse for disposal, but
arrange for the proper recycling.
Old appliances contain valuable materials than can be recycled. Please arrange
for the proper recycling of old appliances.
Please dispose your old appliances using appropriate collection systems.
Notes About the ingredients (REACH)
You will find current information about the ingredients at:
https://www.kaercher.com/int/inside-kaercher/sustainability/supply-chain-and-
products.html
Safety Alert Symbols
DANGER
Indication of an imminent threat of danger that will lead to severe injuries
or even death.
WARNING
Indication of a potentially dangerous situation that may lead to severe
injuries or even death.
CAUTION
Indication of a potentially dangerous situation that may lead to minor
injuries.
ATTENTION
Indication of a potentially dangerous situation that may lead to damage to
property.
Owner/User Responsibility
The owner and/or user must have an understanding of the manufacturer’s
operating instructions and warnings before using this pressure washer.
Warning information should be emphasized and understood. If the operator is
not fluent in English, the manufacturer’s instructions and warnings shall be
read to and discussed with the operator in the operator’s native language by
the purchaser/owner, making sure that the operator comprehends its contents.
Owner and/or user must study and maintain for future reference the
manufacturer’s instructions.
The operator must know how to stop the pressure washer quickly, and understand
the operations of all controls.
Save These Instructions
This manual should be considered a permanent part of this pressure washer and
should remain with it if resold.
Read Engine Manual
Read engine manual (which is separate from this manual) before starting.
SAVE THESE INSTRUCTIONS
CUSTOMER SERVICE
Registration
Your device must be registered in order to help with any questions or issues
that you have. You can register your device at www.karcher-
register.
com if located in the U.S.A., www.karcher.com/ ca
if located in Canada, or www.karcher.com/mx if
located in Mexico.
Warranty
In the case of a warranty claim, you can contact customer support. Please see
the contact information listed below for either the USA, Canada, or Mexico.
You MUST provide your proof of purchase in order to file a warranty claim
either via email, phone, or fax.
USA Customer Service
You can contact our Customer Service department by phone at
1-800-537-4129 or via the website at
www.karcher.com/us.
Canada Customer Service
You can contact our Customer Service department by phone at
1-800-465-4980 or via the website at
www.karcher.com/ca.
Mexico Customer Service
You can contact our Customer Service department by phone at 01-800-024-13-13
or via the website at www.karcher.com/mx.
IMPORTANT SAFETY INSTRUCTIONS
Read the operating instructions of the engine manufacturer before start-up and
follow the safety instructions carefully.
WARNING
When using this product, basic precautions should always be followed, including the following:
- Read all instructions before using product.
- To reduce the risk of injury, close supervision is necessary when a product is used near children.
- High pressure cleaners shall not be used by children or untrained personnel.
- Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.
- Stay alert – watch what you are doing.
- Do not operate when fatigued or under the influence of alcohol or drugs.
- Keep operating area clear of all persons.
- Do not overreach or stand on unstable support. Keep good footing and balance at all times.
- Follow the maintenance instructions specified in the manual.
- To avoid risks, all repairs and replacement of should only be carried out by trained personnel.
- High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings recommended by the manufacturer.
WARNING
Risk of injection or injury, do not direct discharge stream at persons or
animals.
-
High pressure jets can be dangerous if misused.
The jet must not be directed at persons, animals, electrical devices, or the unit itself. -
Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
-
Do not use the machine within range of persons unless they wear protective clothing.
-
To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
DANGER
Do not spray electrical connections, electrical outlets or fixtures.
WARNING
Risk of explosion, do not spray flammable liquids. Operate only where open
flame or torch is permitted.
- Do not use acids, solvents, or any alkaline or flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
CAUTION
Gun kicks back – hold with both hands.
- The trigger gun safety lock prevents the trigger from accidentally being engaged.
This safety feature must be engaged when replacing nozzles or not in use.
WARNING
-
Risk of asphyxiation: use this product only in a well ventilated area.
-
Ensure that any exhaust emissions are not in the vicinity of air intakes.
-
Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc.
-
Running this product indoors can result in death due to carbon monoxide, a poisonous gas you cannot see or smell. Never operate indoors, even if windows and doors are open.
Only use outdoor and far away from windows, doors, and openings or vents. -
During use of high pressure cleaners, aerosols may be formed. Inhalation of aerosols can be hazardous to health.
-
Do not use the machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun.
WARNING
Incorrect fuels shall not be used as they may prove hazardous.
WARNING
Always switch off the On/Off switch when leaving the machine unattended.
WARNING
Risk of fire, do not add fuel when the product is operating or still hot.
CAUTION
- Do not operate if fuel has been spilled. Instead, move machine to different location and avoid creating sparks.
- This machine has hot surfaces which can cause burns. Operate in a safe environment and away from children.
- Do not touch hot surfaces or allow accessories to contact hot surfaces.
- Do not leave machine running unattended.
- Avoid tipping machine on its side.
WARNING
Serious injury can result from high pressure discharge produced by pressure
washers.
Keep out of reach of children.
WARNING PROP 65
This product can expose you to chemicals including Lead and Diisononyl Phthalate, which are known to the State of California to cause cancer, birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov Wash hands after handling.
WATER SUPPLY (Cold Water Only)
** WARNING**
Water that has flowed through backflow preventers is considered to be non
potable.
Use a water filter to avoid potential damage from dirt in the water supply.
- Garden hose must be at least 5/8 inch inside diameter.
- Flow rate of water supply must not fall below 2.64 GPM (Gallons per minute) (10 L/Min (Liters per minute)).
- Flow rate can be determined by running the water for one minute into an empty 5 Gallon bucket (20 Liter container).
- Supply water pressure must be greater than 40 PSI.
- The water supply temperature must not exceed 104°F/40°C.
- Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, fuel, oil, etc.
- Always prevent debris from being drawn into the unit by using a clean water source. Use additional water filter.
- Do not operate pressure washer without the water turned on.
ASSEMBLY INSTRUCTIONS
Hardware (included)
| Description| Purpose| Illustration| Qty
---|---|---|---|---
A| Hexagonal 1/4″ bolt| Handle assembly| | 2
B| Knob| Handle assembly| | 2
| Quick connect nozzle kit| Nozzle kit assembly| | 1
D| Spray wand| Spray gun assembly| | 1
E| Spray Gun| Spray gun assembly| | 1
F| High pressure hose| Spray gun assembly| | 1
G| Detergent siphon hose| Detergent mode| | 1
Assembling
-
Illustration 1:
Attach the handle to the pressure washer frame. -
Illustration 2:
Align holes, insert bolts (A), and tighten with knobs (B). -
Illustration 3:
Place the quick connect nozzles (C) in the nozzle holder. -
Illustration 4,5:
Attach the wand (D) to the spray gun (E).
Push the wand (D) into the trigger gun (E) and then thread the connection. -
Illustration 6:
Remove the cap / dipstick from the oil level and add the oil.
OPERATING INSTRUCTIONS
STEP 1:
Pull the spring-loaded collar of the wand back to insert your choice of quick
connect nozzle.
Release the collar and push the nozzle untilthe collar clicks.
CAUTION
High pressure in nozzle area.
Risk of injury caused by improperly locked nozzle.
- Make sure you hear a “click” when inserting the nozzle tip into the wand.
- Pull the nozzle to make sure it is seated properly before operating your unit.
STEP 2:
Attach the high pressure hose to the trigger gun. Make sure to screw the hose
all the way into the trigger gun.
CAUTION
Engine shipped without oil. Before starting engine, fill with oil. Do not
over-fill. Do not run the engine with a high or low oil level as this can
cause engine damage.
If you have further questions regarding the engine, please refer to the engine
manual included with the unit.
STEP 3:
Check oil level. Oil level should always be between the “MAX” and “MIN” marks
on the dipstick as shown in the picture below.
Be sure the machine is level when checking the oil level. (Refer to the
engines operating manual for seasonal grades).
STEP 4:
Fill gasoline tank with unleaded gasoline.
Do not use leaded gasoline. Consult engine manual for appropriate octane
rating
Do not add oil to the gasoline.
STEP 5:
Connect the high pressure hose to the high pressure outlet on the
pump.
WARNING
High pressure hoses, fittings and couplings are important for the safety of
the appliance.
Use only hoses, fittings and couplings recommended by the manufacturer.
STEP 6:
Connect garden hose to unit’s water inlet.
STEP 7:
Connect garden hose to the cold water source and turn water completely on.
Do not use hot water. (Water supply temperature must not exceed
104°F/40°C).
STEP 8:
Unlock the trigger gun safety lock. Pull Trigger gun to eliminate trapped air,
wait for a steady flow of water to emerge from the spray nozzle.
STEP 9:
Turn On/Off switch to ON position.
STEP 10:
Pull the starter handle. If the engine fails to start after 3 pulls, squeeze
the trigger gun to release pressure, and repeat step.
WARNING
Starter cord kickback (rapid retraction) can result in bodily injury. Kickback
will pull hand and arm toward engine faster than you can let go. ALWAYS
relieve spray gun pressure before pulling starter cord. Pull starter cord
slowly until resistance is felt, then pull rapidly.
USING THE ACCESSORIES
Quick connect nozzles
The color-coded quick connect nozzles provide a wide array of spray widths
from 15° to 65° and are easily accessible when placed in the convenient nozzle
holder.
15° spray angle = Yellow nozzle
For dirt accumulation over a surface.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
40° spray angle = White nozzle
For moderate dirt accumulation over a large surface.
65° spray angle = Black nozzle
For operating with detergents or cleaning with low pressure.
CAUTION
High pressure in nozzle area. Risk of injury caused by improperly locked
nozzle.
- Make sure you hear the “click” when inserting the nozzle tip into the quick connection.
- Pull the nozzle to make sure it is seated properly before operating your unit. (See OPERATING INSTRUCTIONS: Step 1)
WARNING
To avoid serious injury never point spray nozzle at yourself, other persons,
or animals.
WORKING WITH DETERGENTS
Detergents can only be applied with the black detergent nozzle.
STEP 1:
Install the black detergent nozzle for detergent application at low pressure.
STEP 2:
Fill a container with Kärcher detergent diluted according to the
manufacturer’s instructions.
Place the filter end of the detergent suction tube into the
container.
STEP 3:
With the engine running, pull trigger to operate unit.
Liquid detergent is drawn into the unit and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 4:
Always draw fresh water through the detergent suction tube when the cleaning
job is done, to rinse/flush any remaining detergents from the injection
system.
See Cleaning Tips for specific information on how to clean different surfaces.
Detergents
CAUTION
This unit has been designed for use with cleaning detergents recommended by
the manufacturer.
The use of other cleaning detergent may affect the operation of the machine
and void the warranty.
Always Use Kircher Detergent for Best Results Kircher biodegradable detergents
are specially formulated to protect the environment and your pressure washer.
The special formula won’t clog the suction tube filter and will protect the
internal parts of the pressure washer for a longer life. For Kircher
Detergents, check your retailer or visit our website:
karcher.com/us or
karcher.com/ca
CAUTION
Never use:
- Bleach, chlorine products or other corrosive chemicals
- Liquids containing solvents (i.e., paint thinners, fuel, oils.)
- Tri-sodium phosphate products
- Ammonia products
- Acid-based products
WARNING
The use of these chemical, when used with high pressure cleaners, can turn
into an aerosol. Inhalation of chemicals that have been aerosolized can be
hazardous to health.
These chemicals will harm the unit and damage the surface being cleaned.
Use of these items will void the warranty.
TAKING A BREAK …five minutes or more
STEP 1:
Move the engine On/Off switch to the OFF position.
STEP 2:
Release trigger and engage safety lock.
SHUTTING DOWN & CLEAN-UP
STEP 1:
If detergents have been used, insert suction tube into 0.5 gallons (1.8 L) of
fresh water.
Install the black detergent nozzle and siphon water at low pressure for one
minute to clean any detergent residue in the system.
STEP 2:
Move the engine On/Off switch to the OFF position.
STEP 3:
Turn off the water source.
STEP 4:
Press trigger to release water pressure.
STEP 5:
Release trigger and engage gun safety lock.
STEP 6:
Disconnect the garden hose from the water inlet on the unit.
STEP 7:
Disconnect the high pressure hose from the high pressure outlet. Store the
high pressure hose in the hose holder strap.
WINTERIZING AND LONG-TERM STORAGE
It is highly recommended to use Kircher’s Pump Guard (part number 9.558-998.0
sold separately) before winter storage and during the cleaning season to
protect the pump from freezing and premature wear.
STEP 1:
Move engine On/Off switch to OFF position.
STEP 2:
Disconnect all hoses.
STEP 3:
Unscrew cap from Pump Guard bottle.
STEP 4:
Remove internal seal.
STEP 5:
Reattach cap to Pump Guard bottle and remove black protective cap.
STEP 6:
Screw bottle into water inlet on pressure washer pump and squeeze until fluid
starts to exit tue pump
STEP 7:
Pull starter handle until fluid starts to exit the pump’s high pressure outlet
STEP 8:
Unscrew bottle. Store or dispose properly.
CAUTION
Failure to follow the above directions may result in damage to the pump
assembly and accessories and void the warranty.
MAINTENANCE INSTRUCTIONS
Pump
Initial Use
All pumps ship with oil already inside direct from the factory. There is no
need to add oil.
Pump Inspection
You should routinely make a visual inspection of the pressure washer’s pump.
If you notice oil leaking around the pump seals, you should take the pressure
washer to a Kärcher-Authorized Service Center for repair. (You can locate a
service center in your area online at:
https://www.kaercher.com/us/find-a-dealer.html if located in the US or
https://www.kaercher.com/ca/support/services/home-and-garden.html if located
in Canada.
Pump Maintenance
The pump on your Kärcher pressure washer does not require maintenance. Any
attempts to service or alter the pump may damage your pressure washer and void
your product warranty.
Engine
Carry out maintenance tasks for the engine according to the specifications
provided in the operating instructions provided by engine manufacturer.
CLEANING TIPS
Deck Cleaning
(With or without detergent). Pre-rinse deck and surrounding area with fresh
water. If using Kärcher Multi-Purpose Cleaner (part number 9.558-144.0 , sold
separately), apply to surface at low pressure. For best results, limit your
work area to smaller sections of approximately 25ft² (2.3m²). Allow Kärcher
Multi-Purpose Cleaner to remain on surface 1-3 minutes.
Do not allow detergent to dry on surface.
Using the white 40 degree nozzle, rinse at high pressure in a long sweeping
motion keeping the spray nozzle approximately 35 inches (90 cm) andslowly
approach the surface until desired results are achieved. Make sure you are
not causing any surface damage before cleaning the rest of the deck. Always
clean from top to bottom and left to right. When moving on to a new section
of the cleaning surface, be sure to overlap the previous section to eliminate
stop marks and ensure a more even cleaning result. For more information, go to
https://www.kaercher.com/int/home-garden/know-how/cleaning-wooden-
decking.html
Cars, Boats & Motorcycles
(With or without detergent). Pre-rinse vehicle with fresh water. If using
Kärcher Vehicle Wash and Wax (part number 9.558-946.0, sold sepa- rately),
apply to surface at low pressure. For best results, clean one side of vehicle
at a time and always apply detergent from bottom to top, do not allow
detergent to dry on surface. If needed, use special wash brush attachment (not
included) to remove stubborn dirt. Using the white 40 degree nozzle, rinse at
high pressure in a long sweeping motion keeping the spray nozzle approximately
35 inches (90 cm) and slowly approach the surface at no more of 25 in (60 cm)
until desired results are achieved (distance should increase when rinsing pin-
striping or other sensitive surfaces). Always clean from top to bottom and
from left to right. For best results, wipe surface dry with a chamois or soft
dry cloth. For more information, go to https://www.kaercher.com/int/home-
garden/knowhow/car-care.html and https://www.kaercher.com/int/home-garden
/know-how/motorcyclecleaning.html
House Siding
(With or without detergent). Pre-rinse cleaning surface with fresh water. If
using Kärcher Multi-Purpose Cleaner (part number 9.558-144.0, sold
separately), apply to surface at low pressure (for best results, limit your
work area to sections of approximately 6 ft. (1.8m) and always apply detergent
from bottom to top). Allow detergent to remain on surface 1-3 minutes. Do not
allow detergent to dry on surface, if surface appears to be drying, simply
wet down surface with fresh water. If needed, use special wash brush
attachment (part number 8.923-682.0 Rotating Wash Brush, sold separately) to
remove stubborn dirt. Using the white 40 degree nozzle, rinse at high pressure
in a long sweeping motion keeping the spray nozzle approximately 35 inches (90
cm) and slowly approach the surface until desired results are achieved. Make
sure you are not causing any surface damage before cleaning the rest of the
deck.
Cemented Patios, Brick and Stone
(With or without detergent). Pre-rinse cleaning surface with fresh water. If
using Kärcher MultiPurpose Cleaner (part number 9.558-144.0, sold separately)
apply to surface at low pressure. For best results, limit your work area to
smaller sections of approximately 25ft² (2.3m²). Allow Kärcher Multi-Purpose
Cleaner to remain on surface 1-3 minutes. Do not allow detergent to dry on
surface. Using the white 25 degree nozzle, rinse at high pressure in a long
sweeping motion keeping the spray nozzle approximately 25 inches (60 cm) and
slowly approach the surface until desired results are achieved. Make sure you
are not causing any surface damage before cleaning the rest of the surface.
Always clean from top to bottom and left to right. Always clean from top to
bottom and from left to right. For removing extremely stubborn stains, use a
Turbo Nozzle Spray Nozzle (part number 8.641-034.0, sold separately). For more
information, go to https://www.kaercher.com/us/home-garden/application-tips
/mossy-brickand-stone.html
Barbecue Grills, Outdoor Power Equipment & Gardening Tools
(With or without detergent). Pre-rinse cleaning surface with fresh water. If
using Kärcher MultiPurpose Cleaner (part number 9.558-144.0, sold separately),
apply detergent at low pressure.
Allow Kärcher Multi-Purpose Cleaner to remain on surface 1-3 minutes. Do not
allow detergent to dry on surface. Using the white 40 degree nozzle, rinse at
high pressure in a long sweeping motion keeping the spray nozzle approximately
35 inches (90 cm) and slowly approach the surface until desired results are
achieved. For removing extremely stubborn dirt, it may be necessary to move
the spray nozzle even closer to the surface for greater dirt cutting action,
make sure you are not causing any surface damage.
Patio & Lawn Furniture
(With or without detergent). Pre-rinse furniture and surrounding area with
fresh water. If using Kärcher Multi-Purpose Cleaner apply to surface at low
pressure. Allow Kärcher Multi-Purpose Cleaner to remain on surface 1-3
minutes. Do not allow detergent to dry on surface. If needed use special Wash
Brush Attachment (part number 8.923-682.0 Rotating Wash Brush, sold
separately) to remove stubborn dirt. Using the white 25 degree nozzle, rinse
at high pressure in a long sweeping motion keeping the spray nozzle
approximately 25 inches (60 cm) and slowly approach the surface until desired
results are achieved. Make sure you are not causing any surface damage before
cleaning the rest of the surface. For best results, clean from top to bottom
and from left to right. For more information, go to
https://www.kaercher.com/us/home-garden/application-tips/gardenfurniture-
cleaning.html
Recommendations
- Before cleaning any surface, test spray pattern and distance in an inconspicuous area.
- If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.
- When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.
- For additional cleaning tips, visit our website at karcher.com/us or karcher.com/ca
Optional Accessories
Optional accessories are available to further enhance your cleaning
capabilities. These accessories are accurate as of the printing date of this
manual. Please check our website:
karcher.com/us or
karcher.com/ca for pricing and up-to-date
information.
- Extension Hose
- Turbo Nozzle
- 15″ Surface Cleaner
TROUBLESHOOTING
CAUTION
Remove the spark plug cable to prevent accidental ignition of the engine
before making any repair.
Symptom | Cause | Solution |
---|---|---|
ENGINE WILL NOT START | No gasoline | Fill gasoline tank |
Engine switch OFF | Turn engine switch to the ON position | |
Water pressure built up in the machine | Squeeze the trigger to release the |
pressure
For additional engine problems refer to the engine manual.
NOT ENOUGH PRESSURE| Diameter of garden hose is too small| Replace with a 5/8″
inside diameter or larger garden hose
Water supply is restricted| Check garden hose for kinks, leaks or blockage
Not enough inlet water supply| Turn water on full force. Check garden hose for
kinks, leaks or blockage.
Water inlet filter is clogged| Remove filter and rinse out in warm water
Black detergent nozzle is attached| Remove black detergent nozzle and attach
high pressure nozzle
OUTPUT PRES- SURE
VARIES HIGH AND LOW| Not enough inlet water supply.| Turn water on full force.
Check garden hose for kinks, leaks or blockage
Pump is sucking air| Check that hoses and fittings are air tight. Turn off
machine and purge pump by squeezing trigger gun until a steady flow of water
emerges through the nozzle
Water inlet filter is clogged| Remove filter and rinse out in warm water
Spray nozzle is obstructed| Blow out or remove debris with a fine needle
Calcified gun, hose or spray wand| Run distilled vinegar through detergent
suction tube.
NO DETERGENT| Detergent suction tube not properly connected to the machine|
Check connection
Detergent suction tube folded| With machine and water turned off, detach
suction tube to help unfold and reattach.
Detergent is too thick| Dilute detergent, for best results use Kircher
detergent
Symptom| Cause| Solution
---|---|---
NO DETERGENT| Filter on detergent suction tube is clogged| Run warm water
through filter to remove debris
Damaged or clogged deter- gent suction tube| Remove obstruction or replace
detergent suction tube
A high pressure nozzle is attached| Replace with black detergent nozzle
Spray nozzle is obstructed| Blow out or remove debris with fine needle
GARDEN HOSE CONNECTION LEAKS| Loose fittings| Tighten fittings
Missing/worn rubber washer| Insert new washer
SPRAY WAND LEAKS| Spray wand not properly attached| Turn the swivel nut of the
gun clockwise until connection is tight
Broken O-ring or plastic insert| Call listed support phone numbers in Customer
Service section.
Visit www.karcher-help.com or locate a service
center at www.karcher.com/us or
www.karcher.com/ca
PUMP IS NOISY| Not enough water supply| Check that hoses and fittings are air
tight. Turn off machine and purge pump by squeezing trigger gun until a steady
flow of water emerges through the nozzle
WATER LEAKS FROM PUMP (UP TO 10 DROP PER MINUTE IS PER- MISSIBLE)| Loose
fittings| Check fittings
Water seals are damaged or worn.| Visit www.karcher-help.com or locate a service center at
www.karcher.com/us or
www.karcher.com/ca
Thermal protection device is activated.| Thermal protection device will auto
reset. Do not run pump for more than 5 minutes without spraying
OIL DRIP| Oil seals are damaged or worn| Visit www.karcher-help.com or locate
a service center at www.karcher.com/us or
www.karcher.com/ca
If the symptom you are experiencing is not listed above, or if the provided
solutions do not solve your issue, please visit our extensive online
troubleshooting database at:
www.karcher-help.com or
www.karcher.com/ca/support/faqs.html
WARRANTY INFORMATION
High Pressure Washers
3 Year Limited warranty
This Kircher product is warranted by Kircher to be free of defects in
workmanship and materials under normal use.
Specific warranty applies to:
- Kircher KPS and KXS series engines are warranted for three (3) years parts and labor and serviced by a Kircher service center
- Honda GX series engines are warranted for three (3) years parts and labor and serviced by a Honda authorized service center
- Pumps are warranted for three (3) years parts and labor and are serviced by a Kircher service center
- Frames, handles and detergent tanks, and other structural components, carry a three (3) year parts and labor warranty.
- Standard accessories and attachments are warranted for a ninety (90) day period.
- Any commercial, industrial or rental use of this equipment will VOID the warranty.
The warranty period is calculated from the date of purchase by the end user
and covers the cost for replacement parts and/or equipment and warranty labor
performed. In order to verify a warranty situation, the machine must be
evaluated by an Authorized Kircher Service Center or by an authorized service
center representing the engine manufacturer. A copy of the original purchase
receipt or gift receipt from the original retailer must also accompany the
warranty claim. To locate the nearest authorized Kircher service center,
please visit our website at www.karcher-help.com or
www.karcher.com/ca/support/faqs.html
Your device must be registered in order to help with any questions or issues
that you have.
You can register your device at www.karcher-register.com.
Kircher’s obligation under this warranty shall strictly be limited, at
Kircher’s option, either to replace or repair, through Kircher direct or
through an Authorized Kircher Service Dealer without charge during the
warranty period any part, which in the opinion of the manufacturer, shows
defect in workmanship or material. Service will be scheduled according to the
normal work flow and business hours at the service center, and availability of
replacement parts. All decisions of Kircher with regard to this limited
warranty shall be final.
This warranty does not cover:
- Merchandise sold as reconditioned, used, demonstration or floor models.
- Merchandise purchased on eBay and other online auction web sites.
- Damage caused by misuse, neglect, accident, abuse, improper handling, freezing, normal wear and tear or non-compliance with operator’s manual.
- Damage caused by water sediment, contaminated water supply or use of chemicals and detergents not approved by or recommended by Kircher.
- Damage caused by acts of nature such as floods, fires, earthquakes, lightning strikes, etc.
- Devices or accessories not distributed or approved by Kircher. Any use of such said devices or accessories will void implied warranty.
- Repairs made by the end user or any service center not authorized by Kircher. Any such tampering with Kircher equipment or accessories will void the implied warranty.
- Any cost for shipping by the customer or authorized service center of the alleged defective part or equipment.
This warranty is non-transferable and applies only to products purchased through a Kircher authorized reseller in the United States and Canada . Equipment provided, but not manufactured by Kircher such as Honda and Kohler petrol engines are subject to warranties and service through said manufacturer’s service centers according to the terms and conditions provided by the respective original equipment manufacturer. Kircher is not authorized and has no responsibility to provide warranty service for Honda. This warranty gives you specific legal rights. You may have other rights, which vary by country and state/province.
Please register online at www.karcher-register.com
Online registration is quick, free and provides you with a confirmation email
for your records.
THANK YOU!
MERCI!
Register your product and benefit from many advantages.
www.kaercher.com/welcome
www.kaercher.com/dealersearch
Alfred Kircher SE & Co. KG
Alfred-Kircher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
References
- Cleaning and maintenance tips for the home and garden | Kärcher International
- Home | Kärcher Canada
- Cleaning Equipment for Home & Industrial Applications | Kärcher
- P65Warnings.ca.gov
- Dealer Search | Kärcher International
- Locate a Kärcher Authorized Dealer | Kärcher
- Home and Garden Warranty Registration USA - Kärcher
- Support : Karcher US Online Support
- Home and Garden Warranty Registration USA | Kärcher
- Support and Service for Home & Garden Professional Products | Kärcher
- Cleaning equipment and pressure washers | Kärcher International
- Home | Kärcher Canada
- FAQs | Kärcher Canada
- Inicio | Kärcher
- Cleaning Equipment for Home & Industrial Applications | Kärcher
- Cleaning Equipment for Home & Industrial Applications | Kärcher
- Cleaning Equipment for Home & Industrial Applications | Kärcher
- P65Warnings.ca.gov
- Cleaning equipment and pressure washers | Kärcher International
- Services | Kärcher Canada
- Home & Garden Cleaning Tools | Kärcher International
- Inside Kärcher | Kärcher International
- Cleaning Equipment for Home & Industrial Applications | Kärcher