WATERWARE Quarry Dunstan Concrete Basin Instruction Manual
- August 5, 2024
- WATERWARE
Table of Contents
WATERWARE Quarry Dunstan Concrete Basin Instruction Manual
CARE AND MAINTENACE
Our basins are unique with the colour sealed finish giving them good water tolerance, enhancing the colour and protecting the sink from wear, but it’s not invincible. It is best practice that you avoid the use of abrasive cleaners, soaps or harsh scrubbers that could potentially wear down the sealer. We recommend using mild, nonabrasive, non-ammonia, non-acidic cleaners.
General cleaning is best done using a soft cloth and a mild soap of neutral pH. It is recommended to apply a wax to maintain the concrete sink every 6 months, especially in areas that are prone to lime scale.
YOUR WALL MOUNT SINK KIT WILL CONTAIN
-
Drill bolt holes in the wall using the bracket as a template. Fix to the wall with expansion bolts, ensuring the bracket is at a level height.
-
Apply glue to the contact area between the bracket and the basin, place the basin on top of the bracket, and adjust the position of the basin in line with the bracket waste cut out.
-
Thread the drainer through the waste hole in the basin and bracket, and tighten with the supplied locking nut.
-
After installing the basin, wait for the glue to dry before connecting waste pipework and tapware.
waterware.co.nz |info@waterware.co.nz | 0800 WATERWARE