MONSTER Airmars XKO06 True Wireless Bluetooth Headphone Instruction Manual
- August 5, 2024
- Monster
Table of Contents
MONSTER Airmars XKO06 True Wireless Bluetooth Headphone Instruction Manual
Monster Airmars XKO06
Product parameters
Product Schematic Description
Charge the charging case
Connect the charging case to the 5V power adapter with Type-C charging cable.
TIPS: When the cover of the charging box is closed, the indicator light of the charging box flashes ice-blue, please charge the charging box.
Indicator guide
Product operating instructions
- Headphones will try reconnecting to the device within 3 minutes when connection is lost.
NOTE:
- Fully charge the headphones and power off before an intended not-in-use period.
- Unplug the charging cable after charging.
Operation
Restore factory settings
- If the headset is not paired with the Bluetooth device after the headset is turned on, the left/right headset is paired successfully. After clicking the left/right headset for 5 times, the left/right ear is turned off (all information about pairing and connection is cleared).
- In the power-on connection state, tap the left and right headphones five times, hold down for 10S within 3S, and then power off (clear all pairing and connection information).
Precautions
-
Take out the earphone from the charging box, without pressing any button, the earphone
will automatically turn on, connect or pair, put the earphone into the charging box, and the
charging box will automatically Charge your headphones. Turn them off. -
Often clean, long life, if not used for a long time, it is recommended to charge once every
15 days to extend battery life, and the charging part of the headset is often used with cotton
swabs Alcohol wipe, can help smooth charging, avoid bad contact, affect the use experience. -
The battery [battery pack or battery combination] shall not be exposed to lighting, baking
or similar overheating environment; Do not disassemble, knock, squeeze or throw.In the fire,
if there is serious swelling, do not continue to use; Do not place in high temperature
environment; Do not use after soaking water. -
Because this product adopts wireless connection mode, it is affected by environment,
mobile phone brand, usage behavior and other factors in daily use.It may be normal to have a brief, slight sound delay during the playing of music.
Warnings
- Do not use headphones at high volume for an extended perios of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise warranty will be voided.
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agent on the headphones.
This table is compliled according to SJ/T 11364
O : Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
X : Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference。
(2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
FCCID：2A8PV-QSMXKO06
Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical produsts will not leak or mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.
Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>