tuya TLC2206P-WL Smart WiFi Water Level Monitor User Manual

: August 5, 2024
: Tuya

Table of Contents

TLC2206P-WL Smart WiFi Water Level Monitor
Specifications:
Product Usage Instructions:
Installation:
Connection:
Setting:

TLC2206P-WL Smart WiFi Water Level Monitor

“`html

Specifications:

Sensor Connectivity: Wifi (max 50m range without obstacles),
RF433MHz (max 150m range without obstacles)
Indicator: Blue LED (20%, 40%, 60%, 80%, 100%), Yellow LED for
pump on/off and alarm indication
Pump Functions: Refilling alarm when tank is at high level,
Draining alarm when tank is at low level

Product Usage Instructions:

Installation:

1. Tear off the 3M tape on the Indicator and mount it on the wall.

Connect the indicator to power adapter and power on.

Mount the sensor on top of the tank. Connect the sensor to
power adapter and power on.

Notice:

```
* Power on the indicator first, and then power on the  
```
sensor.
- The sensor should be in the middle of the tank and not on a
  liquid inlet. Refer to the provided pictures for the best
  installation positions. The hole should be 72mm.

Connection:

Scan code to download TUYA Smart APP or Smart Life APP on a
mobile device.

Setting:

Set Installation height (distance from sensor to tank
bottom).
Set sensor to liquid full line (distance from sensor to full
line).
Select the pump working mode (Refilling by default) or drainage
mode.
Set Max for high level alarm.
Set Min for low level alarm.

FAQ:

Q: What should I do if my mobile phone can’t find the device or

fails to connect?

A: Press the button of the indicator until it beeps to add the
device again.

Q: Can I use the product to monitor multiple tanks

simultaneously?

A: Yes, you can monitor several tanks at one time by setting up
multi-tank monitoring in the app.

“`

user manuel

1.definition

Sensor

Indicator

Wifibetweenindicatorandrouter(max50m noobstacle) RF433MHzbetweensensorandindicator(max150m noobstacle) Power BlueLED:20%,40%,60%,80% and100% YellowLEDon/off:Pumpon/off YellowLEDflash:Alarm andbuzzerbeeping.
PumpRefilling:onlyalarm whentankishighlevel PumpDraining:onlyalarm whentankislowlevel

2.installation 1)Tearoffthe3M tapeontheIndicatorandmountonwall.Connecttheindicatorto poweradapterandpoweron. 2)Mountthesensorontopofthetank.Connectthesensortopoweradapterand poweron.
Notice:1)Powerontheindicatorfirst,andthenpoweronthesensor. 2)Thesensorshouldbeinthemiddleofthetankandnotonaliquidinlet.Pleaserefertothefollowing picturesforthebestinstallationpositions.Theholeshouldbe72mm.

3.connection 1)Scancodetodownload”TUYASmartAPP”or”SmartLifeAPP”onmobile device.

4.setting 1)SetInstallationheight
Itisdistancefrom sensortotankbottom 2)Setsensortoliquidfullline
Itisdistancefrom sensortofullline 3)Selectthepumpworkingmode(Refillingbydefault)ordrainagemode 4)SetMaxforhighlevelalarm 5)SetMinforlowlevelalarm

2)TurnontheW-Fiandbluetoothofyourphone,entertheappandadddevice

Putthesensorright

ClickHome-AddDevice

SelectDevice

Note:WIFIfrequencycanonlybe2.4GHz,not5GHz

EnterWiFiaccountpassword

Note:Theinstallationheightisdifferentwithtankheightbecausethesensormay beinstalloverthetankheight.
6)SetAlarm
Gobacktothehomepage,click”Scenes”,

Awayfrom tankwall

Sensorcan’ttouchliquid

2)Create a scene

Whenaddingdevice,makesurethattheindicatorandthemobileareconnectedtothesameWIFI. Aftersetting,theindicatormustworkunderwifi.Ifthemobilephonecan’tfindthedeviceorfailstoconnect thedevice,pleasepressthebuttonoftheindicatoruntilbeepsoundstoaddthedeviceagain

Create Scenes

Whendevicestatuschanges

Liquidlevelstatus

Click “+”

Send notification

Editthescenename,andclick”Confirm”.

5.multi-tankmonitoring

MessageCenter-Save

Cansharewatertankdatawithothers.
6.wifismartsocket(optional) 1)Poweronsmartplug,LEDflashestoenterconnectionmode.Ifitdoesn’t flash,pleasepressthebuttonofplugfor10seconds. 2)OpentheAPPtoaddsmartplug.

Create Scenes

Whendevicestatuschanges

Tanklevelmonitor

ControlSingleDevice

smartplug

Save Smartplugcanalsobeusedalone.

Setthesmartplugonandoff.

Beabletomonitorseveraltanksinonetime 3.

Add Device

HomePage

Liquidlevelstatus

Click “+”