MGC DIFF-PRESSURE-KIT for MIX-4010-DUCT Photoelectric Duct Smoke Detector Installation Guide
- August 3, 2024
- MGC
Table of Contents
MGC DIFF-PRESSURE-KIT for MIX-4010-DUCT Photoelectric Duct Smoke Detector
Product Information
Specifications
- Product Name: DIFF-PRESSURE-KIT for MIX-4010-DUCT
- Manufacturer: Mircom Group
- Address: 25 Interchange Way, Vaughan Ontario, L4K 5W3
- Contact: Phone – 905.660.4655; Fax – 905.660.4113
- Website: www.mircomgroup.com
Product Usage Instructions
- Remove the 4 screws and the cover from the device.
- Take out the diverter from the device.
- Position the adapter parts with the large holes facing upwards.
- Hold the manometer tubes over the adapter holes while taking measurements.
- Once the measurements are taken, set aside the manometer, remove both rubber gaskets, reinstall the diverter, and close the lid with the screws.
FAQ
- Q: What does the DIFF-PRESSURE-KIT for MIX-4010-DUCT consist of?
- A: The kit consists of two parts – a small rubber gasket and a larger rubber gasket.
- Q: How do I contact Mircom Group for support?
- A: You can reach Mircom Group at Phone 905.660.4655 or by fax at 905.660.4113. You can also visit their website at www.mircomgroup.com.
INSTALLATION INSTRUCTIONS
PARTS LIST
- DIFF-PRESSURE-KIT consists of two parts: a small rubber gasket and a larger rubber gasket.‘
REMOVE THE PLASTIC COVER ON MIX-4010- DUCT
REMOVE THE DIVERTER
PLACE THE ADAPTER PARTS
- HOLD THE MANOMETER TUBES OVER THE ADAPTER HOLES WHILE YOU TAKE THE MEASUREMENT
- ONCE THE MEASUREMENTS ARE TAKEN, SET ASIDE THE MANOMETER, REMOVE BOTH RUBBER GASKETS, REINSTALL THE DIVERTER, AND CLOSE THE LID WITH THE SCREWS.
CONTACT
- 25 Interchange Way, Vaughan Ontario. L4K 5W3
- Phone: 905.660.4655; Fax: 905.660.4113
- Web: www.mircomgroup.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>