MGC QPS-6650 Power Supply Instruction Manual
- June 9, 2024
- MGC
Table of Contents
MGC QPS-6650 Power Supply
The power supply is model QPS-6650. The ratings are outlined in the table below.
Model| Electrical Input Ratings| Power Supply Total Current| Battery Fuse on
Main Module
---|---|---|---
QPS-6650| 120 VAC, 60 Hz/ 230 VAC, 50Hz| 27 Ah @ 24V DC| 50 Amp
Power Supply Mechanical Installation
The QPS-6650 power supply mounts into the BBX-FXMNS-6000 Enclosure in the top right position, as shown below. It also mounts in the same location in the QBB-6001 Expansion enclosure. Mount the QPS-6650 using the screws packaged. There are 3 mounting holes as shown in Figure 2.
Figure 1 QPS-6650 Power Supply Mechanical Installation
QPS-6650 Wiring
Refer to Figure 2 wiring information. AC voltage in is wired to the bottom left terminals, all other wiring is at the top terminals. For further wiring instruction see LT-6683 manual.
Figure 2 QPS-6650 Power Supply Wiring
LT-6690 Rev 0 Dec 2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>