FALCON MNL_771RM Thermoset Toilet Seat Installation Guide
- August 3, 2024
- Falcon
Table of Contents
FALCON MNL_771RM Thermoset Toilet Seat
Please read carefully before you start and retain for future reference Please read carefully before attempting to fit the seat. If you are not the end user, please make sure the aftercare instructions are made available for the end user to read.
PARTS DIAGRAM
- The seat is supplied with the above fixing kit (2x of each component except Fixing Key))
FITTING INSTRUCTIONS
FITTING THE SEAT TO THE PAN
- Insert the swivel hinge into the seat fixing hole at the rear of the ring/lid as shown in the diagram above (Stage 1 ). Bolt the seat to the pan using the fixings in the configuration shown in the diagram above (stage 2). To adjust the seat position to align with the pan see the adjustment below. Once the seat is in desired position fully tighten the nut using the fixing key supplied.
ADJUSTMENT
View of underside of hinge body. Align the seat on the pan by adjusting the fixing bolts position. Adjustment can be made by rotating the disc (a) and/or sliding the fixing bolt backwards and forwards (b)
- For minimum seat projection fit the hinge anchors as shown in Fig. 1.
- For maximum seat projection fit the hinge anchors as shown in Fig. 2.
AFTERCARE INSTRUCTIONS
- Clean surfaces with a soft damp cloth and mild soap solution
- Do not scrub or scour
- Do not use abrasive cleaning agents
- Do not stand on the lid or ring of your toilet seat
CUSTOMER SERVICES
Brassmill Lane Trading Estate. Bath BA1 3JF I tel: 01225 303900
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>