FALCON ELECTRONICS WiFi License Plate Backup Camera User Guide
- June 3, 2024
- FALCON ELECTRONICS
Table of Contents
FALCON ELECTRONICS WiFi License Plate Backup Camera
User Guides
Camera connected to the car
- Red cable connect with ACC 12-24V+
- Yellow cable connect with reverse lanmp+.
- Black cable connect with GND
Steps for usage
- Open the MRT-Camera APP and click the onnection button. Or directly open the wlan/wifi connection settings in the phone settings.
- In the pop-up wlan/wifi connection setting interface, turn on wlan/wifi and refresh the search wifi signal.
- Find and connect the wifi signal named MRT-WifiCamera_xKxxxx. (Note: xxxXxx is a 6-digit device ID.)
- When the cell phone prompts whether to keep the wifi connected, choose to keep the connection.
- Return to the APP to use the wifi rearview camera normally. When the connection is successful, the wifi button icon is displayed in green.
Main functions
Intelligent video recording function Intelligent video recording and sharing
function can be achived after connecting to smart devices via wifi Intelligent
electronic rearview mirror function you can watch the situation behind the car
in real time after entering rear view mode through the device to Prevent the
occurrence of danger and ensure driving safety. Intelligent monitoring
function Can be installed in front of the car, rear, left and right sight
blind spot position, open the software to monitor
Download The App
Method one
Download the Android app using the scann- ing software or browser that comes
with the Android phone to scan the corresponding QR code on the user manual.
After the down is complete, click install.
Method two
Search for MRT-Camera in the Google Play, then download and install it.
ioS APP Download
Method one
Scan the I1OS QR code in the user manual with camera or other scanning
software, enter the appstore, download and install the MRT-Camera application.
Method two: Search for MRT-Camera in the appstore, then download and instal.
App Instructions
video recording,lmage frame rate willdecrease when video recording
take a photo
video and photo playback
Click this icon to select WiFi signal starting with MRT and Colortums green
Image mirroring
setting the reverse scale switch
Trouble shooting
No image
Make sure the camera is connected correctly, open the phone’s wifi signal
list, and check if the phone is connected successfully to the wifi hotspot
generated by the camera. Video is not smooth Check if the antenna isshielded
by metal
Products and accessories Camera,screwwxtension cable, specification,3M
adhesive
Installation
Rear view installation red cable connect with ACC 12V~24V+ yellow cable connect with reverse lanmp+ black cable connect with GND. Front left\right view installation Red cable connect with ACC 12~24V. Yellow cable do not need to be connected. Black cable connect with GND
[email protected].972.600.1320