Lydsto YM-S1-03 Handheld Pool Vacuum with Telescopic Pole User Manual

Lydsto YM-S1-03 Handheld Pool Vacuum with Telescopic Pole

Specifications :

• Product Name: Handheld Pool Vacuum Cleaner S1
• Model: YM-S1-03
• Rated Power: 30W
• Working Voltage: 14.8V

Product Usage Instructions

Charging the Batteries:

1. Please fully charge the cleaner before first-time use.
2. Indicator light blinks blue when power supply is insufficient.
3. Constant red light indicates the cleaner has run out of power.
4. Lights will go out when electricity runs out.

Important Notes:

1. Before charging, turn the ON/OFF button to OFF position.
2. Ensure the cleaner is vertically downward to let water flow out for 1 minute to avoid water entering the charging port.
3. Clean and dry the cleaner and charging port thoroughly.

Charging Process :

1. Gently open the soft seal to expose the charging port.
2. Connect the adapter to the charging port ensuring a secure connection.
3. Indicator light turns red while charging and steady blue when fully charged.
4. After charging, ensure the seal is back in place and the plug is inserted into the charging hole completely.

Instructions for Use :

1. Attach handheld handle by pressing the spring button and inserting it into the back handle of the main body.
2. For telescopic aluminum pole, press the elastic buckle to assemble it into the expansion pipe and main body.
3. Ensure filter box lock is tightly secured before use.
4. Flick the ON/OFF button in the ON direction until you hear a click to start using the cleaner.

FAQ :

• Q: What should I do if the indicator light does not change after charging?
  A: If the indicator light does not change after charging, please ensure the adapter is securely connected to the charging port and try again. If the issue persists, contact customer support.

User Manual
Handheld Pool Vacuum Cleaner S1
Please read the instruction carefully before using this product, and keep the instruction for future reference.

Instructions for use

• This is not a toy. Do not allow children to use it as a toy. Keep away from Children.
• Assembly and operate only by adult, this cleaner is not intended for use for someone with reduce physical, sensory or mental capabilities, or a lack of experience and knowledge unless they have been given instructions concerning the appliance and are under supervision of the person responsible for their safety.
• Do not use if unit is damaged in any way.
• This cleaner creates suction, keep hair, fingers, any part of body and any loose part of your clothing from the openings and suction range.
• This cleaner is intended to be used only for the purposes described in the instruction. Do not use your cleaner to clean anything other than your pool and spa.
• Submerged the body with indicator light completely in water to operate properly.
• Suitable water temperature: 0°C (32°F)~ 40°C(104°F).
•  Maximum operation depth in water is 2.5 meters (8.2ft) .
• Use only accessories and replacement parts specified in instructions.
• Do not use it without filter. Replace filter if damaged.
• Avoid picking up large, hard and sharp objects with the vacuum.
• Never leave cleaner plugged into the main outlet for long term storage.
• Never leave cleaner in the water when it is off or has run out of battery power.
• This product is designed for routine general maintenance of your pool and spa. Do not use for cleaning for longer accumulated heavy dirt.
• Do not vacuum chemical sewage, corrosive liquid, toxic substances, flammable or combustible liquids such as gasoline, or operate in the presence of explosive or flammable fumes.
•  Never insert or drop any object into any opening on the device. Keep all openings free of leaves. rocks or anything that may reduce water flow.
• Do not use on or near hot surfaces.
• Always turn off and unplugged from the charger before cleaning, filter replacement or any routine maintenance.
• Do not charge the product with wet hands and barefoot, and do not touch the product with wet hands or barefoot while charging.
• Keep the charger with cord, charging port and electrical outlet out of reach of children especially during charging.
• Use your charger indoors in a clean and dry place. Do not expose charger to water, any liquid high moisture, or extreme temperature.
• Disconnect charger from power supply after charging , and before any routine cleaning and maintenance. Do not operate the cleaner during charging.
• Keep the cord and charger away from sharp objects or hot surfaces.
• Do not charge cleaner with damaged cord or damaged charger.
• Do not use power extension cords.
• The battery installed is rechargeable lithium polymer batteries. Do not attempt to replace it.
• Do not use cleaner while the polios being used.
• Do not attempt to disassemble the cleaner and replace the impeller, motor and batteries by yourself.
• Extra care when cleaning the stairs.

Product Introduction

• The handheld pool vacuum cleaner is a rechargeable cleaner which is easy to use. It saves water and reduces chemical consumption in the cleaning process.
• It needs to be completely immersed in water within 60 seconds after starting up, and water intake port must also be immersed in water (right picture),otherwise it will stop working after 60 seconds.
• It is designed to collect floor and seat debris – it is not a surface skimming device. Do not use your cleaner to clean anything other than your pool and spa.
• This product is designed for routine general maintenance of your pool and spa. Do not use for cleaning for longer accumulated heavy dirt.
• The product is powered by 2500mAh rechargeable lithium polymer battery, It takes about 4.5 – 5.5 hours to charge full electricity, use for about 60 minutes after being fully charged.

Parts List

Charging the batteries:

• Please fully charge cleaner before first time use.
• When the power supply is insufficient, the indicator blinks blue. Constant red light when the cleanerruns out of power immediately. When the electricity runs out, the lights will go out.

Warning:

• Make sure power supply is normal household voltage, 120 volts, 60Hz (240 volts, 50Hz International) AC only.
• Charging must be done indoors in dry and ventilated place away from sunlight, heat, ignition and temperature between 5 C°(41F°) and 35 C°(95F°)
• Do not leave the pool vacuum in charge for over 20 hours.
• Do not charge the product with wet hands and barefoot ,and do not touch the product with wet hands or barefoot while charging.
• Keep the adapter with cord, charging port and electrical outlet out of reach of children, especially during charging.
• Use your adapter indoors in a clean and dry place. Do not expose adapter to water, any liquid, high moisture, or extreme temperature.
• Disconnect adapter from power supply after charging , and before any routine cleaning andmaintenance.
• Do not operate the cleaner during charging.
• Keep the cord and adapter away from sharp objects or hot surfaces.
• Do not charge cleaner with damaged cord or damaged adapter.
• Important note :
  • Before charging please turn On/off button to OFF(see above), turn the cleaner body vertically downward to let the water flow out about 1 minutes to avoid the water entering into the charging port.
  • Make sure the cleaner and charging port are completely clean and dry.

1. Open the soft seal upper gently with fingers, to expose the charging port . Don’t pull too hard, which may break the seal or pull it off from the body. If the water enters the charging hole, pour it out and use a dry cloth to clean and dry it.
2. Connect the small end of adapter, the adapter DC head, into the charging port on the cleaner. DC head has to be inserted in place to avoid sparking when it is loosen connected with charging port. Connect the adapter to the electrical outlet.
3.  When charging, the indicator light red, and when the cleaner is fully charged, it becomes the Steady blue. when the power supply is fully charged, remove the adapter from the power socket and disconnect DC head from the charging port on the vacuum cleaner.
4. After charging, push back the seal and ensure the its plug is inserted into the charging hole completely. Now it is ready to use.

Instructions for Use

Pool Vacuum cleaners are available in two ways: handle and telescopic pole

1. With handheld handle.
   Attach the handheld handle by pressing spring button and insert it into the back handle of the main body. If you want to remove the handle, press the spring button and remove the handle.

2. Telescopic aluminum pole
   Press the elastic buckle of the expansion pipe connector and assemble it into the expansion pipe. Adjust the expansion pipe connector until it is locked in place. Then press the elastic buckle at the other end and install the expansion pipe connector into the main body. If you want to remove the expansion pipe, press the shackle to remove the expansion pipe, and press the spring buckle on the main body to remove the expansion pipe joint. Rotate the lock catch in the direction of “OPEN”, and the aluminum tube can be expanded freely.Then rotate the lock catch in the direction of “lock”, and the aluminum tube can be locked.

3. Please ensure that the filter box lock is tightly locked before use

4. Flick the ON/OFF button in the “ON” direction until you hear a click

5. Place the pool cleaner in the water until it is completely submerged
   Important reminder :
   Please immerse the machine in water, otherwise the machine will automatically shut down after 60 seconds. When the indicator light is blue, it means normal operation; when the power is insufficient, it flashes blue; when the power is low indicator light is red, the machine will shut down after the power is used up.

6. As shown in the picture, please put the floor brush into the filter box when using it. Make sure that the buckle of the floor brush is fully installed before using it to prevent the floor brush from falling off during use

7. You can use a cleaning machine with a floor brush to brush and suck the dirt from the bottom of the pool (no larger than the suction hole at the bottom of the brush)

8. For larger debris, you can also suck without floor brush to clean the bottom of the pool (not larger than the suction hole)

How to clean the filter

1. Flip the ON/OFF button to “OFF”, ensure that the machine is closed, turn the filter box lock towards the main body, and then take out the main body
2. Take out the filter component, then press the handle according to the arrow indicating the lock of the filter cover, and take out the lock of the filter cover. When taking out the filter cover, it should face upward to avoid falling garbage
3. Dump the garbage out of the filter assembly and rinse the filter frame and cover with clean water. Do not use sharp or hard objects to clean the filter frame. After cleaning, install the filter cover back to the filter rack and hear a click
4. When assembling the filter component, please pay attention to the assembly direction, you can install as shown in the picture below
5. Install the main body back on the dust box, and lock the dust box tightly

Routine Maintenance

1. After recharging, insert the water-proof seal into the charging port to prevent water from entering the battery part.
2.  Clean the cleaner with fresh water to prevent chemical damage after every time using. Do not use detergent .
3. Never leave cleaner in the water when it is off or has run out of battery power.
4. Clean the filter after each time using.
5. Never leave it outdoors in sunlight, heat, hot surfaces, rain, high moisture, and pool chemicals.
6. Dry and clean the body with dry cloth, Make sure to dry the water from whole unit and accessories,and keep it stored indoors with room temperature .
7. Never leave cleaner plugged into the main outlet for long term storage.
8. Do not use it without filter or with damaged filter.
9. Please fully charge cleaner before long term storage and it should be stored at room temperature.For long term storage, battery discharges on its own during storage. Please recharge it when reusing after long term storage.
10. You must recharge the battery at least once every three months if it is not frequently used.
11. Don’t use cleaner when charging.
12. Avoid picking up large, hard and sharp objects with the vacuum.
13. Never disassemble the main body set without prior consultation with manufacturer.

Troubleshooting and solution

to toggle the ON/OFF button
Check the impeller for any foreign object stuck| Turn on the flashlight and observe the impeller from the water outlet for any foreign object
The battery pack is damaged| Return to factory for repair
Doesn’t Suck Up| To check if the machine is fully submerged underwater| Completely submerge the machine
Check that the brush suction is not blocked by a large object| Remove the large foreign object from the suction
Smells Bad| The filter rack and dust box have garbage not cleaned| Clean the garbage in the filter rack and dust box
Plastic odor| Leave the new machine in an empty area for 20 minutes until the plastic odor dissipates
Indicator light is off| Check that the pool cleaner is turned on| Flip the ON/OFF button to check whether the indicator light can be on when the machine starts up
Indicator light damage| Return to factory for repair
The machine shuts down automatically during cleaning| Automatic-shut down protection after 60s| Completely submerge the pool machine in water

Manufacturer: Hubei Yimu Electronic Technology Co., Ltd.
Address: 7-16-103 Modern Sino-Canada Science and Technology City, West of Yewang Road, Shazui Street, Xiantao,Hubei Province,China
Service line: +86 400-077-8387
Company website: www.Lydsto.com

References

• Lydsto | Born for cleanliness | Robot Vacuum & Robotic Pool Cleaner

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>