SOLARMAN LSW-5 Stick Logger User Guide
- August 6, 2024
- SOLARMAN
Table of Contents
SOLARMAN LSW-5 Stick Logger User Guide
Notice:
Please read this manual carefully before using products and keep it in the
place where O&M providers can easily find.
Due to product upgrade and other factors, the content of this manual might
change from time to time. Please take actual product as standard and get
latest manual from www.solarman.cn or sales. Unless
otherwise agreed herein, this manual will only be used as guidance. Any
statement, information or suggestion in this manual will not take any form of
responsibility.
Without written permission, any content of this document (partly or entirely)
cannot be extracted, copied or transmitted in any form by any company or
individual.
Warning:
Please remove logger after power off.
Download APP
If you are an household user, please scan QR code below to download SOLARMAN Smart APP. Or you can log in to https://home.solarmanpv.com
- Stick Logger Installation
Type 1
Step1:Assemble logger to the inverter communication interface as shown in the diagram.
Type 2
Step1:Assemble logger to the inverter communication interface as shown in the
diagram.
Type 3
Step1:Assemble logger to the inverter communication interface as shown in
the diagram.
- Logger Status
Check Indicator light
The normal operation status of the stick logger, when router connected to
the network normally:
1.Connection to the server succeeded: NET light keeps on after the logger
powered on.
2.Logger running normally: READY light flashes.
3.Connection to the inverter succeeded: COM light keeps on.
- Abnormal State Processing
If the data on platform is abnormal when the stick logger is running, please check the table below and according to the status of indicator lights to complete a simple troubleshooting. If it still can not be resolved or indicator lights status do not show in the table below, please contact Customer Support.
(Note: Please using the following table query after power-on for 2mins at least.) **
**
Warning:
Please do not hold the logger body to rotate while install or remove the
logger.
Notice:
Do not remove waterproof plug.
USER MANUAL for SOLARMAN Smart APP
Please make sure Bluetooth and WiFi are ON and the router can connect to the network normally.
1.Registration
Go to SOLARMAN Smart and register.
Click “Register” and create your account here.
2.Create a Plant
Click “Add Now” to create your plant.
Please fill in plant basic info and other info here.
3.Add a Logger
Method 1: Enter logger SN manually.
Method 2: Click the icon in the right and scan to enter logger SN
You can find logger SN in the external packaging or on the logger body.
4.Network Configuration
Step 1: Click“Go to Configure”to set the network. (Please make sure Bluetooth
and WiFi are ON.)
Step 2: Please wait for a few minute. Then click “Done” and view plant data.
****Notice:
5G WiFi is not supported .
If configuration failure occurs, please check the following reason and try it
again.
（1） Make sure WLAN is ON.
（2） Make sure WiFi is normal.
（3） Make sure wireless router does not implement the white-black list.
（4） Remove the special characters in Wi-Fi network.
（5） Shorten the distance between the phone and device.
（6） Try to connect to other Wi-Fi.
**** Warning: Please make sure the stick logger is working properly before you leave the site. If there is anything abnormal, please do not leave the site and contact customer service at the first time.
If you have any technical queries about our products, please contact us and
provide the following information:
1. Product model and serial number of stick logger.
2. Product model and serial number of connected inverter.
Thank you for your support and cooperation!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>