Solarman App User Manual
- June 4, 2024
- SOLARMAN
Table of Contents
Solarman App
Download APP
iPhone Search “SOLAR MAN” in Apple Store.
Android Search “SOLAR MAN” in Google Play
Register
Click [Register] to create new account. You can use email to register
.
Create Plant
Click[+] and select [Create Plant]. Then scan the serial number of the stick
logger. or manually enter the serial number.
Edit plant information
- Confirm your plant location (GPS function will automatically determine the plant site; if you want to modify the location, click the “map” icon, and then manually enter the address in box b)
- Select your plant type
- Select your grid type
- Fill in plant capacity
(You may keep the default settings in the rest of the blank because APP has
received local electricity prices and subsidies) 
Input Plant Name
It is suggested to create a plant name like “location + name + capacity”
(e.g., Wuxi IGEN 8.1 ‘r0N), then click [Done].
Now you can see your new plant on the homepage.
WiFi Connection Configuration
Select the plant and click [Connect Again] in the tab [Device]. Select your
device and click [Done] to the next step.
Configuration (for Android users)
APP will automatically get your WiFi network, so you need to enter your WiFi
password to continue the configuration. If the network is not accurate, select
[switch network], then find or manually enter the network
ID.
The connection will automatically start after connecting the
network.
It normally takes 3-5 minutes to configure successfully. Then, you can go back
to tab [Device] and click [+Device] to add more
devices
Configuration (for iOS users)
APP will automatically get your WiFi network, so you need to enter your WiFi
password to continue the configuration. If the network is not accurate, select
[switch network], then find or manually enter the network
ID.
Go to iPhone’s [Network Settings] interface, and select the stick logger’s
network AP _XXXXX(S/N). Then return to SOLAR MAN APP, and the stick logger
will start to configure.
Notice
If it is unable to find an AP_XXXXX(S/N) in the wireless network list, please
make sure to shorten the distance between WiFi routers and Stick Logger to
under 10 meters. The connection or setting may appear problem if you have to
repeat the above steps and still cannot find the AP _XXXXX. Please follow the
Logger Manual for troubleshooting or contact our Customer Centre.It normally
takes 3-5 minutes to configure successfully, Then, you can go back to tab
[Device] and click [+Device] to add more devices.
If the configuration fails, the reasons may be:
- The router password is wrong. Please click [Retry] and check the password.
- The router’s network signal is weak and the logger is too far away from the router. Please put the router closer to the logger.
- Click too fast during the Logger’s AP connection. Please wait a few seconds and then jump to the configuration after Logger’s AP is connected.
If you meet the following situations, please reconfigure the logger network:
- Change router
- Change WiFi password
- Change the router’s SSID
- Enterprise routers may restrict WiFi connectivity.