FLOS Zeppelin 1 Suspension Light Installation Guide
- August 4, 2024
- FLOS
Table of Contents
FLOS Zeppelin 1 Suspension Light
Product Information
Specifications
- Design: Achille Castiglioni, 1996
- Socket Type: E27 HSGS
- Weight: Approximately 15 Kg
- Assembly Sequence: Fig.1E – 2E – 3E – 4E – 5E – 6 – 7 – 8 (EUR), Fig. 1U – 2U – 6 – 7 – 8 (USA)
Product Usage Instructions
Installation
Ensure the ceiling fixing is appropriate for the weight of the appliance
(approximately 15 Kg).
Assembly
- Follow the assembly sequence as per the provided instructions.
- Use the correct type of nogs based on the ceiling material.
Electrical Connection
Ensure proper electrical connections:
- L (Phase): BLACK, NOIR, NEGRO
- N (Neutral): WHITE, BLANC, BLANCO
- E (Earth): GREEN, VERT, VERDE
FAQ (Frequently Asked Questions)
-
Q: What is the recommended weight capacity for the Zeppelin 1?
A: The recommended weight capacity is approximately 15 Kg. -
Q: What type of socket does the Zeppelin 1 use?
A: The Zeppelin 1 uses an E27 HSGS socket. -
Q: How should I determine the appropriate ceiling fixing for installation?
A: Consider the weight of the appliance (approximately 15 Kg) and use the correct type of nogs based on the ceiling material.
Zeppelin 1
Design Achille Castiglioni, 1996
INSTRUCTION FOR CORRECT INSTALLATION AND USE
WARNING!
The safety of this fitting can only be guaranteed if these instructions are
observed, during both installation and use. Please retain these instructions
safety.
REMARKS:
- When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
- The appliance may in no way be modified or tampered with, any modification may compromise safety causing the appliance to become dangerous. FLOS declines all responsibility for products that are modified.
- Should the external trailing cable get damaged, it must be replaced by FLOS or by qualified personnel in order to avoid any danger.
- The symbol marked on the appliance indicates the need to use self-protected bulbs.
- This appliance must be connected to an efficient grounding system in order to work safely and correctly.
- The symbol shown on the device indicates that the product must be thrown out in a different manner than with the urban trashes.
TECHNICAL DATA
- EUR: Incandescent halogen light bulb MAX 150W E27 coupling, type HSGS.
- USA: Incandescent halogen light bulb MAX 250W E26 coupling, type A.
CLEANING INSTRUCTIONS
- Use only a soft cloth to clean the appliance, dampened with water and soap or mild cleanser if needed for resistant dirt.
- Warning: do not use alcohol or other solvents.
Assembly Sequence
| VERSION | Assembly Sequence |
|---|---|
| EUR | Fig.1E – 2E – 3E – 4E – 5E – 6 – 7 – 8. |
| USA | Fig. 1U – 2U – 6 – 7 – 8. |
Fig.1E NOTE: for a correct use of the product it is necessary to ensure that
the ceiling fixing (type of nogs used depend on the material making up the
ceiling) is appropriate for the weight of the appliance (approximately 15 Kg).
- L (Phase, Phase, Fase): BLACK, NOIR, NEGRO
- N (Neutral, Neutre, Neutro): WHITE, BLANC, BLANCO
- (Earth, Terre, Tierra): GREEN, VERT, VERDE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>