tp-link AP9650 Omada Pro Ceiling Mount AP Instructions

tp-link AP9650 Omada Pro Ceiling Mount AP

Product Information

operation of this device
to indoor use only. The operation of this device is prohibited on
oil platforms, cars, trains, boats, and aircraft, except that
operation of this device is permitted in large aircraft while
flying above 10,000 feet. Operation of transmitters in the
5.925-7.125 GHz band is prohibited for control of or communications
with unmanned aircraft systems.
EU Declaration of Conformity| TP-Link hereby declares that the device is in compliance with
the essential requirements and other relevant provisions of
directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp- link.com/en/support/ce/.
UKCA Mark| UK Declaration of Conformity. TP-Link hereby declares that the
device is in compliance with the essential requirements and other
relevant provisions of the Radio Equipment Regulations 2017. The
original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca.
Canadian Compliance Statement| Caution. This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm
between the radiator and your body.
Korea Warning Statements| NCC Notice & BSMI Notice.

Product Usage Instructions

Safety Information:
Keep the device away from water, fire, humidity, or hot environments.

National Restrictions:

• For FCC Compliance: This device is only permitted for indoor use. Operation on oil platforms, cars, trains, boats, and aircraft (except large aircraft flying above 10,000 feet) is prohibited.
• For EU Compliance: This device is restricted to indoor use. Outdoor use, including road vehicles and unmanned aircraft systems, is not permitted in the 5945-6425MHz frequency band.
• For UK Compliance: This device may only be used indoors in Great Britain.

Operating Frequency (the maximum transmitted power):

5150 MHz – 5250 MHz
5250 MHz – 5350 MHz
5470 MHz – 5725 MHz| 20dBm
23dBm
23dBm
30dBm
AP9778| 2412 MHz – 2472 MHz
5150 MHz – 5250 MHz
5250 MHz – 5350 MHz
5470 MHz – 5725 MHz
5925 MHz – 6425 MHz| 20dBm
23dBm
23dBm
30dBm
23dBm

FCC Compliance Information Statement

Product Name: Omada Pro Ceiling Mount Access Point

• Model Number: AP9635 / AP9650 / AP9670 / AP9778

Responsible party:

TP-Link USA Corporation

• Address: 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp‑link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E‑mail: sales.usa@tp‑link.com.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”

For AP9778:
FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY

OPERATING FREQUENCY (the maximum transmitted power)

For AP9635 / AP9650 / AP9670:

• 2412 MHz -2472 MHz (20dBm)
• 5150 MHz -5250 MHz (23dBm)
• 5250 MHz -5350 MHz (23dBm)
• 5470 MHz -5725 MHz (30dBm)

For AP9778:

• 2412 MHz -2472 MHz (20dBm)
• 5150 MHz -5250 MHz (23dBm)
• 5250 MHz -5350 MHz (23dBm)
• 5470 MHz -5725 MHz (30dBm)
• 5925MHz -6425 MHz (23dBm)

EU Declaration of Conformity

• TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
• The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/.

RF Exposure Information

• This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
• The device complies with RF specifications when the device is used at 20cm from your body.

National Restrictions

For AP9635 / AP9650 / AP9670:

Frequency band: 5150 – 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

Frequency band: 5250 – 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.

Frequency band: 5470 – 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

For AP9778:

Frequency band: 5150 – 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

Frequency band: 5250 – 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.

Frequency band: 5470 – 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

Frequency band 5945 -6425MHz:
Restricted to indoor use, including in trains with metal-coated windows and aircraft. Outdoor use, including in road vehicles, is not permitted.

UKCA Mark

UK Declaration of Conformity

• TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
• The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca.

National Restrictions

Attention: This device may only be used indoors in Great Britain.

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution

For AP9635:

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.

For AP9650 / AP9670 / AP9778:

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.

DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470- 5600MHz, and 5650-5725MHz.

For AP9778:
ISED regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed
• The adapter shall be installed near the equipment and shall be easily accessible.
• Operating Temperature: 0℃ ~ 40℃ (32℉ ~ 104℉ )
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The product label can be found at the bottom of the product.

Symbol/Explanation

• Class II equipment
• Alternating current
• Direct current
• For indoor use only
• The polarity of d.c. power connector
• Energy efficiency marking (Level VI)
• Caution
• Operator’s manual
• RECYCLING
  • This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
  • User has the choice to give their product to a competent recycling organization or to the retailer when they buy new electrical or electronic equipment.

Mounting Requirements

For safety, we recommend you use the original screws in the package when mounting. The following are alternatives to mount the device on the wall:

• Use 4 screws which comply with ANSI B1.1 4# standard and are longer than 15 mm.

References

• Link: Simple, secure one-click payments
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>