JMGO PicoFlix Smart Projector User Guide
- August 3, 2024
- JMGO
Table of Contents
JMGO PicoFlix Smart Projector
Product Usage Instructions
- Slide down to open the back cover of the remote control and install 2 AAA batteries.
- Insert new batteries matching the polarity (+/-) and close the battery compartment securely.
- To pair with Bluetooth, press and hold the designated buttons simultaneously for 3 seconds.
- To power on the projector, press the Power Button on the projector body or use the Power On button on the remote control. To power off, press the same button again.
- Adjust the projector’s distance from the screen or wall to achieve different projection sizes. The recommended distances are 1.0m, 2.1m, 2.6m, and 3.2m for various screen sizes.
- Connect the power adapter to the TYPE-C Power Port on the projector body to charge it. A white light indicates that the projector is charging or powered on.
- Do not disassemble, impact, or expose the product to high temperatures. Avoid using damaged chargers or batteries. In case of battery swelling or water exposure, discontinue use immediately.
FAQ
- Q: How do I install the batteries in the remote control?
- A: Slide down the back cover of the remote, insert 2 AAA batteries following the polarity markings, and close the cover securely.
- Q: What is the warranty period for the JMGO projector?
- A: The projector is guaranteed for 1 year starting from the date of purchase or package receipt. For any performance failure within this period, return the package within 30 days for repair or replacement.
Thank You Letter
Thanks for the recognition of the JMGO projector, what is presented to you is
one of our proudest works. We believe that when the product is on, you can
also feel our passion for it.
This product is not just an audio-visual device, we hope it can give ordinary
walls more room for imagination and become an important companion in your
life.
Over the past ten years, we have focused on core component development and
continuously improved product experience, and have grown into a leading
company in the smart projector and laser TV industries.
If you like this product, welcome to share its user experience, so that more
people can join the big family of JMGO.
Founder of JMGO Eric Hu
Safety Notice
- Read this product manual thoroughly before attempting to use this product. Store the product manual in a safe location so it may be referenced at any time.
- Do not look directly into the light source lens of the device, as intense light may damage your eyes.
- When the projector is working, do not block the projection lens with any object.
- If you encounter an issue with the product, do not attempt to disassemble it without authorization. Contact professional after-sales personnel to resolve the issue.
Scope of Delivery
Remote Control
- Power On/Off
- Direction Keys
- Return
- Menu
- Settings
- YouTube
- Netflix
- Google Assistant
- Confirm
- Home
- Volume
- Input Source
- Prime Video
- Slide down to open the back cover, and then install 2 AAA batteries.
- Insert new batteries matching the polarity (+/-) and close the battery compartment.
After the projector is turned on, press and hold the and the on the remote control for 3 seconds at the same time to enter Bluetooth pairing.
Product Manual
Charging and Power On
- Before first use, please use the included adapter to fully charge the projector.
- Power on: The power button is a physical button, short press to power on.
Projection Size & Distance
Safety Warning
- This product contains a built-in battery.lt is forbidden to disassemble, impact against or squeeze the product or throw it into the fire. In case of serious swelling, DO not continue using the product.lt is forbidden to use the product if the battery is soaked in water. Avoid placing the product in a high-temperature environment.Do not use any damaged chargers or batteries.RG1 IEC 62471-5:2015
- Google TV is the name of this device’s software experience and a trademark of Google LLC.
- Google and YouTube are trademarks of Google LLC.
- Google Assistant is not available in certain languages and countries. Availability of services varies by country and language.
Download and Install of “JMGO App
- JMGO App is a mobile application for multi-screen interaction with a JMGO projector. Using the JMGO App can help you obtain better projection experience.
- Mobile phone for remote control—the mobile phone is also a remote control with the JMGO App and the projection remote control is more convenient.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This projector complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with a
minimum distance of 20cm between the radiator and user body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC WARNING: This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
This remote has been evaluated to meet the general RF exposure requirement.
This remote can be used in portable exposure conditions without restriction.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by [licensee name] is under license. Other trademarks and trade names are those of their respective owners
EU Declaration Conformity
Hereby, SHENZHEN HOLATEK CO., LTD. declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. Per Article 10 (2) and Article 10 (10), This product is allowed to
use in all EU member states.
A complete declaration of conformity can be obtained at:
https://smart.jmgo.com/
The device can operate in EU Member State without restriction.
The device is restricted to indoor use only when operating in the 5150 to 5250MHz frequency range.
Warnings
- EUT operation temperature range: 0ºC to 35ºC.
- Do not store the device in temperatures lower -20 ºC and higher than 60 ºC.
- An adapter shall be installed near the equipment and shall be easily accessible.
- To power the device, Please use a matching power supply adapter offered by the authorized producer, an unauthorized adapter may cause the charger to explode or damage the machine.
- Plug the adapter power socket in a 100-240VAC socket, others may cause the charger to explode or damage the machine. The plug is considered as a disconnect device of an adapter.
Adapter
- Input: AC 100-240V 50/60Hz 2.0A
- Output: 24V 4.17A 100W
- Technical description:
- Rating: 24V 4.17A
- Frequency Range: Bluetooth: 2402-2480MHz
- 2.4G WiFi (20 MHz): 2412 – 2472 MHz
- 2.4G WiFi (40 MHz): 2422 – 2462 MHz
- 5G WiFi(H20): 5180 – 5240 MHz
- 5G WiFi(H40): 5190 – 5230 MHz
- 5G WiFi(H80): 5210MHz
- 5G WiFi: 5745 – 5825MHz
- Transmit Power: Bluetooth: 3.32dBm EIRP
- 2.4G WiFi: 15.03 dBm EIRP
- 5G WiFi: 17.88 dBm EIRP
Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This device must operate
with a minimum distance of 20 cm between the radiator and user body.
After-Sales Service Policy
Shenzhen Holatek Co., Ltd. (hereinafter “JMGO”) formulates its after-sales
policies in strict accordance with relevant laws and regulations to provide
the “three guarantees” of repair, replacement and return.
Warranty Policy
Service Period: The validity period of “three guarantees” commences from the
date of purchase or the date of receipt of the package. If the product
experiences a performance failure, the package must be returned within 30
days. The projector is guaranteed for 1 year.
Note: The warranty period shown in the table above is a distributor recommendation only. Specific local laws and regulations shall prevail. If you encounter any problems or want to know more about the after-sales information, you can email after-sales@jmgo.com for advice.
Non-Warranty Policy
This product is not covered by warranty in the following circumstances: The
validity period of “three guarantees” has been exceeded; maintenance, misuse,
collision, negligence, abuse, liquid ingress, accident, alteration,
disassembly, or improper use of accessories has been carried out without
authorization from JMGO; quality problems have occurred due to the
installation of unauthorized software; or labels, device serial numbers or
anti-counterfeiting labels have been destroyed or altered; the model of the
“three guarantees” certificate does not match or the model of the damaged
product, or has otherwise been altered; damage caused by force majeure; damage
caused by use in environments that do not conform to the specifications of the
product manual; damage caused by use in environments that do not conform to
the specifications of the product manual; failure or damage caused by computer
viruses, hacker intrusion, or other malicious intrusions; damage caused by the
use of software that is not authorized by JMGO.
Three Guarantees Policy
Return or replacement will not be provided in the following circumstances:
Damage caused by human action; missing or damaged packaging; or missing or
damaged internal components. When seeking for return or replacement, please
return all provided accessories as well (including but not limited to product
accessories, gifts, warranty cards, manual, etc.). To ensure a smooth return
or replacement process, we recommend that you keep the outer packaging,
accessories, and any free gifts provided with the products for 30 days from
the date of receipt. JMGO has the right to refuse the return or replacement of
products that do not meet the replacement requirements or exceed the warranty
period. Back up your data and applications before seeking replacement or
repair. The maintenance process may result in the loss of your data and
applications. JMGO will protect your privacy but takes no responsibility for
any damage or loss of personal data and applications resulting from the repair
or replacement process.
After-Sales Service Channels
- If you encounter any problems while using the product, contact us through one of the following channels:
- After-Sales Website: https://smart.jmgo.com/
- After-Sales service email: after-sales@jmgo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>