JmGO P2 DLP Smart Portable Theater User Manual

JmGO P2 DLP Smart Portable Theater

Warning: Read Safety & Health Info
Read this guide for important safety and health information and the terms of the limited warranty that apply to the project device that you have purchased. Keep all printed guides for future reference. Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices.

Warning: Do Not Attempt Repairs
Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open or modify this evidence, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

Warning: Use Near Water
To reduce the risk of fire or shock, do not use this device near water and do not expose it to rain or moisture, do not attempt to dry the device with a hair dryer or a microwave oven.

Warning: Battery safety
This device contains a built-in battery, improper use of which may result in an explosion. Do not heat, open, puncture, mutilate, or dispose of the product in a fire. Do not leave the product in direct sunlight for an extended period, which could cause melting or battery damage. The battery in this device is not user-replaceable and should only be replaced by a JmGO Authorized Service Provider.

Warning: AC Adapter Safety
Failure to take the following precautions can result in serious injury or death from electric shock or fire in damage to the device.

• Use only the power supply unit and AC power cord that came with your device or that you received from an authorized retailer.
• Do not use non-standard power sources, such as generators or inventors, even if the voltage and the frequency appear acceptable. Only use AC power provided by a standard outlet.
• Do not overload your wall outlet, extension cord, power strip,or other electrical receptacle. Confirm that they are rated to handle the total current drawn by the device and any other devices that are on the same circuits.

Warning : Shocking Hazard This device may contain small parts which may be a shocking hazard to children under 3. Keep small parts away from children.

COPYRIGHT
Information and views expressed in this document may change without notice. This document does not provide you with any legal rights to any intellectual property in any JmGO product. You may copy and use this document for your internal, reference purposes.

Packing List

Note: please carefully check the items in the package and contact the seller as soon as possible in case of missing any item.

Appearance and functions

Buttons and operations

• Press to power on/off the device;
• Press and hold the Power but and o button at the same time to reset (when the system halted)

External power source

• Connect one end of the power adapter to DC IN and the other end to the mains supply to use the device.

Screen size and throw distance

The throw distance and screen size are directly proportional, the longer the distance is, the larger the size will be. You can adjust the distance according to actual need (the data above are for reference only).

Status indicator

The indicator is on the Power button and it can indicate different working statuses by different colors (orange and white);

• Charging: the indicator remains on in orange;
• Charging complete: the indicator remains on in white;
• Low power: the indicator flashes in orange when the power level is low. In such a case, you need to save your settings and connect an external power source as soon as possible.
• Abnormal: the indicator flashes in orange and white in turn (every 1s and last for 5s) when the fan or power source is abnormal and the device fails to power on. In such a case, check whether the air inlet or outlet is blocked and start the device again. If the problem remains, please contact the seller for repair.

Adjusting focus

You can adjust the focus by turning the knob up and down until the projection is clear.

Network connection

You can configure your wireless network under “Settings” – “Network settings” – “Wireless settings”.

3D play

You can play 3D video directly or play the 2D video in 3D by pressing the 3D button during the play.

Note: please note that the JmGO active shutter 3D glasses are required to view 3D contents.

Connecting other devices

The product supports connection with various external devices. You can choose special cables for the connection according to actual need.

Downloading and installing Jmgocon

By downloading the Jmgocon App, you can control the JmGO Smart Portable Theater with your mobile phone. Scan the QR code below to download and install the Jmgocon App on your mobile phone.

Using Jmgocon

1. Install Jmgocon App and configure wireless network according to this manual for the device to access to internet.
2. Run Jmgocon App on your mobile phone, as shown in the picture below:
3. Click the icon to enter the main interface of the App, then click “Unconnected devices” to display pull-down list:
4. Select the IP address of the device and click Connect, then you can control the device with your mobile phone.

Functions and introduction of Jmgocon

Power button : click to call dialog box and select “Yes” to power off.

WARRANTY CARD

Warranty ( All Regions Except China Mainland)
JmGO values your business and always attempts to provide you with the very best service. If this product requires maintenance, either contact the dealer from whom you originally purchased the product or visit our product support website at en.jmgo.com for information on how to obtain service or a Return Material Authorization(RMA). If it is determined that the product may be defective, you will be given an RMA number and instructions for product return. An unauthorized return(i.e., one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, repaired and insured, to the address provided on your return paper. Your original box and package should be kept for storing or shipping your JmGO system.

Limited Warranty
JmGO warrants that the product, in the course of its normal use, will for the term defined below, be free from defects in materials and workmanship and will conform to JmGO’s specification therefor. The term of your limited warranty is for one year and this period shall commence on the purchase date appearing on your purchasing receipt. Subject to the limitations specified above, your sole and exclusive warranty shall be, during the period of warranty, the repair or replacement of the product with an equivalent or better one.

Contact information

• Customer service : 400-662-0138 (China Mainland Only)

• Manufacturer : Shenzhen Holatek Co., Ltd.
  Website: en.jmgo.com

• Address of after-sale service center: 5F, Block A1, Yingzhan Industrial Park, Longtian Community, Kengzi, Pingshan New District, Shenzhen

1. Copyright © Shenzhen Holatek Co., Ltd. All rights reserved.
2. The materials are for reference only

• Scan for more information
• Email: contact@jmgo.com
• Website: en.jmgo.com

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

References

• JMGO – JMGO Online

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>