JMGO N1 Ultra 4K Projector User Guide
- June 13, 2024
- JMGO
Table of Contents
JMGO N1 Ultra 4K Projector User Guide
Safety Notice
- Read this product manual thoroughly before attempting to use this product.
- Store the product manual in a safe location so it may be referenced at any time.
- Do not look directly into the light lens of the device as your eyes may be damaged by a strong laser.
- When the projector is working, do not block the projection lens with any object.
- If you encounter an issues with the product, do not attempt to disassemble it without authorization. Contact professional after-sales personnel o resolve the issue.
Note: The model approval cods is shown on the product nameplate.
Certificate of Conformity
CERTIFICATE INSPECTED
Scope of Delivery
Projector Body
Remote Control
Quick start Guide
Power Cable
Power Adapter
Allen Wrench
Remote Control
- Power On/Off
- Direction Keys
- Return
- Settings
- Google Assistant
- Confirm
- Home
- Menu
- Volume
- After the projector is turned on, press and hold the settings button and the menu button on the remote control for 3 seconds at the same time to enter Bluetooth pairing.
- This remote has been evaluated to meet general RF exposure requirement.
- This remote can be used in portable exposure condition without restriction.
Product Manual
Downloads and . That pawer button is physical button, short prass to power on or ot
Download and Install of
“JMGO App”
- JMGO App is a mobile application for multi-screen interaction with JMGO projector. Using JMGO App can help you obtain better projection experience.
- Mobile phone for remote control-the mobile phone is also a remote control with JMGO App, and the projection remote control is more convenient.
Product Laser Safety Parameters
- Laser Safety Standard: Class 1 in compliance with the IEC 60825-1:2014.
- The maximum output of laser radiation: 0.39mW
- Emission Wavelength:
- Blue: 455-475nm
- Red: 635-655nm
- Green: 515-535nm
Caution
Class 1 Laser product Do not stare into the beam RG2 Complies with IEC
60825-1:2014 and IEC 62471-5:2015.
safety Warning:
This product contains laser module. Do not disassemble or modify this module
in @ manner ot specified in the manual without authorization. Failure to
follow this guideline may result in personal injury. S with any bright source,
do not stare into the direct beam, RG2 IEC 52471-5:2015,
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This projector complies with
FCC RF radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator and user body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
For DIS patents, sees its patent dts.com Manufactured under cense from DTS, Inc. to DTS Licensing limited. D15, . KD, and the D15 KO Lago are registered trademarks or trademark’s of DTS, Inc.in the Untied States on other counties.
5021 D15, Inc. ALL RIGHTS REGERVED.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by [licensee name] is undo license. Other trademarks and trade. hams are those of there respective owners
Google and Android TV are trademarks of Gaogle LLC. Google Assistant is not available in certain languages and countrias. Availability of services varies by country and language.
EU Declaration Conformity
Hereby, SHENZHEN HOLATEK CO., LTD. declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. In accordance with Article10(2) and Artical10(10), This product is
allowed to use in all EU member states, A complete declaration of conformity
can be obtained at: https://smart.jmgo.com/
The device can operate in EU Member State without restricted.
AT| BE| BG| HR
CY| CZ| OK| SE
EE| Fl| FR| DE
EL| HU| IE| LI
IT| LV| LT| LU
MT| NL| PL| ES
PT| RO| SK| SI
The device s restricted to indoar use anly when operating in the S150 ta 5250mi frequency range.
Warnings
- EUT operation temperature range: 0°C to 40°C.
- Do not store the device in temperatures lower -20 °C and higher than 60 °C.
- Adapter shall be installed near the equipment and shall be easily accessible.
- To power the device, Please use a matching power supply adapter offered by the authorized producer, unauthorized adapter may cause charger exploding or damage the machine. The plug considered as disconnect device of adapter.
- Adapter:
- Input: AC 100-240V 60/50Hz 2.5A
- Output: 24V-7.5A 180W
- Technical description:
- Rating: 24V-7.5A
- Frequency Range: Bluetooth:2402-2480MHZ
- 2.4G WiFi (40 MHz): 2422 2462 MHz
- 5G WIFI(H20): 5180 – 5240 MHz
- 5G WIFI(H40): 5190 5230 MHZ
- 5G WIFI(H80): 5210MHZ
- 5G WiFi: 5745 5825MHZ
- Transmit Power: Bluetooth: 1.74 dBm EIRP
- 2.4G WiFi: 13.15 dBm EIRP
- 5G WiFi: 13.37 dBm EIRP
- Radiation Exposure Statement
- This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must operate with a minimum distance of 20 cm between the radiator and user body.
After-Sales Service Policy
Shenzhen Holatek Co., Ltd. (hereinafter “JMGO”) formulates its after-sales policies in strict accordance with relevant laws and regulations to provide the “three guarantees” of repair, replacement and return. Warranty Policy Service Period:
The validity period of “three guarantees” commences from the date of purchase or the date of receipt of the package. If the product experiences a performance failure, the package must be returned within 30 days. The projector is guaranteed for 1 year.
Scope of Warranty | Warranty Content | Warranty Period |
---|---|---|
Projector | The projector and its constituent components | 1 year |
Accessories | Separately sold accessories and internal accessories | 1 year |
*Note: The warranty period shown in the table above is distributor recommendation only. Specific local laws and regulations shall prevail. If you encounter any problems or want to know more about the after-sales information, you can email after-sales@jmgo.com for advice.
Non-Warranty Policy
This product is not covered by warranty in the following circumstances: The
validity period of “three guarantees” has been exceeded; maintenance, misuse,
collision, negligence, abuse, liquid ingress, accident, alteration,
disassembly, or improper use of accessories has been carried out without
authorization from JMGO; quality problems have occurred due to the
installation of unauthorized software; or labels, device serial numbers, or
anti-counterfeiting labels have been destroyed or altered; the model of the
“three guarantees” certificate does not match or the model of the damaged
product, or has otherwise been altered; damage caused by force majeure; damage
caused by use in environments that do not conform to the specifications of the
product manual; damage caused by use in environments that do not conform to
the specifications of the product manual; failure or damage caused by computer
viruses, hacker intrusion, or other malicious intrusions; damage caused by the
use of software that is not authorized by JMGO.
Three Guarantees Policy
Return or replacement will not be provided in the following circumstanc- es:
Damage caused by human action; missing or damaged packaging; or missing or
damaged internal components. When seek for return or replacement, please
return all provided accessories as well (including but not limited to product
accessories, gifts, warranty cards, manual, etc.). To ensure a smooth return
or replacement process, we recommend that you keep the outer packaging,
accessories, and any free gifts provided with the products for 30 days from
the date of receipt. JMGO has the right to refuse the return or replacement of
products that do not meet the replacement requirements or exceeded the
warranty period. Back up your personal data and applications before seeking
replacement or repair. The maintenance process may result in the loss of your
personal data and applications. JMGO will protect your personal privacy but
takes no responsibility for any damage or loss of personal data and
applications resulting from the repair or replacement process.
After-Sales Service
Channels If you encounter any problems while using the product, contact us
through one of the following channels: After-Sales Website:
https://smart.jmgo.com/After-Sales service email: after-
sales@jmgo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>