Shenzhen Minsuo Industrial CM-002 Mouse-Pad Charger Instruction Manual
- June 6, 2024
- Shenzhen Minsuo Industrial
Table of Contents
Shenzhen Minsuo Industrial CM-002 Mouse-Pad Charger Instruction Manual
Getting started
- Remove the product from the box.
- Please retain all packaging after you have checked and counted all the parts and the contents against the list.
Package Contents
- Mouse-Pad Charger
- USB Charging Cable
- Instruction Manual
Key Features
- Mouse-Pad with Wireless Fast-Charger
- Convenient to charge, wireless, hassle free & great looking
- Just charge your phone by placing it on Mouse-Pad
- No need to attach any cable to phone
- Suitable for all Qi enabled mobile phones
- Works also as dashboard mat
- Micro USB cable included
- Input: 5V/2A, 9V/1.67A
- Output: 5V/1A, 9V/1A; Max 10W
Safety Instructions
-
Keep the product away from heat sources, direct sunlight, humidity, water and any other liquids.
-
Do not operate the product if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the product.
-
Do not use the product if it has been dropped or damaged in any way.
-
Repairs to electrical equipment should only be performed by a qualified
electrician. Improper repairs may place the user at serious risk. -
Do not use the product with wet hands.
-
Do not put objects into any of the openings.
-
Keep the product free from dust, lint etc.
-
Do not use this product for anything other than its intended use.
-
Keep the product out of reach of children.
-
This product is not a toy.
Description of Parts:
INSTRUCTIONS FOR USE
- Connect the USB charging cable (included) to a suitable power outlet rated DC 5V/2A or 9V/1.67A, and the Micro USB plug to the Micro USB port of the Mouse-Pad Charger. Green and Blue LED indicators will flash 3 times and then off.
- Place your wireless-charging enabled (Qi Integrated) phone on the wireless charging area. Your phone will begin charging immediately, and Blue LED indicator light on the mouse pad will turn on.
IMPORTANT: Some phone cases do not support Wireless Charging due to their thickness and design. If your Phone model is compatible with wireless-charging and you’re unable to charge it wirelessly, please remove your phone case and retry.
Care and Maintenance
Read the following recommendations before using the product. Following these you will be able to enjoy the product for many years.
-
Don’t expose the device to liquid, moisture or humidity to avoid the product’s
internal circuit being affected. -
Don’t use abrasive cleaning solvents to clean the device.
-
Don’t expose the device to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
-
Don’t dispose of the device in a fire as it will result in an explosion.
-
Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
-
Don’t let the device fall on the floor. The internal circuit might get damaged.
-
Don’t attempt to disassemble the device as it may get damaged if you are not professional.
Specifications
Input: DC 5V/2A, 9V/1.67A Output: DC 5V/1A, 9V/1A Dimension: 270 L x 188 W x 5 H mm
FCC STATEMENT : This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation. Warning: Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving an tenant.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help. FCC Radiation Exposure Statement: This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.