SHARP BP-1360M, BP-1250M Setting of Air Assist Valve Adjustment Profile Owner’s Manual
- August 8, 2024
- Sharp
Table of Contents
BP-1360M, BP-1250M Setting of Air Assist Valve Adjustment Profile
Setting of Air Assist Value Adjustment Profile
Air assist is a function to send air when feeding paper to prevent multi-feed
and paper jam. Perform air assist adjustment according to the paper size.
How to Set
Set the air assist value adjustment profile according to the paper type, paper
weight, size, and humidity.
Note
The profile can be set only in the System Administrator mode. For how to log
in with the System
Administrator mode, refer to “User’s Manual – Operations.”
1 Check if the paper can be adjustable.
Adjustable papers are shown below:
Coated: 64 to 80 g/m2
Uncoated: 106 to 135 g/m2 , 177 to 216 g/m2 , 177 to 216 g/m2
2 Check the humidity.
- Tap > [Device] > [Maintenance].
- Tap [NVM Read/Write].
- Enter “525-460” in Chain-Link.
The humidity is displayed in [Current Value] Note
Do not tap [Change].
3 Setting of the air assist value adjustment profile
- Tap > [Device] > [Paper Tray Settings] > [Common Settings] > [Custom Paper Settings].
- Tap the user paper that you want to change the settings.
- Tap [Adjust Air Assist Values].
- Set the air assist value adjustment profile according to the paper type, paper weight, size, and humidity, and tap [OK].
In the case of coated: 177 to 216 g/m2 -> Go to P.2.
In the case of coated: 64 to 80 g/m2 -> Go to P.3.
In the case of uncoated: 106 to 135 g/m2 -> Go to P.4.
In the case of uncoated: 177 to 216 g/m2 -> Go to P.5.
When a paper jam occurs in the air tray, set the air assist profile
again.
Set the air assist value adjustment profile according to the fault code so
that the paper jam can be resolved. Check the followings before setting the
air assist value adjustment profile.
-
The paper size, paper type, and weight are correctly set.
-
Paper is loaded in the paper trays correctly.
Note
The guide is correctly adjusted to the paper size. -
Paper is in the correct state.
When paper is curled, correct the curl.
When there are paper burrs (small projections on the cutting surface of paper), fan out papers well.
In the case of coated: 64 to 80 g/m2 In the case of coated: 177 to
216 g/m2
In the case of uncoated: 106 to 135 g/m2 In the case of uncoated: 177
to 216 g/m2
Paper feeding error
If the error is not resolved even after the recommended value is entered,
enter an appropriate value within the adjustment range according to the error
status. Multi-feed
If the error is not resolved even after the recommended value is entered,
enter an appropriate value within the adjustment range according to the error
status. Multi-feed
If the error is not resolved even after the recommended value is entered,
enter an appropriate value within the adjustment range according to the error
status.
SHARP CORPORATION
March 2024 Edition 1
GM1975E9 -1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>