NEXIGO S03 Battery Pack for Oculus Meta Quest 2 User Manual

: August 2, 2024
: NEXIGO

Table of Contents

NEXIGO S03 Battery Pack for Oculus Meta Quest 2
Product Information
Product Usage Instructions
PRODUCT INTRODUCTION
PRODUCT DIAGRAM
WHAT’S IN THE BOX
SPECIFICATIONS
HOW TO USE THE BATTERY PACK
IMPORTANT NOTES
FCC STATEMENT
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEXIGO S03 Battery Pack for Oculus Meta Quest 2

Product Information

Specifications

Battery Capacity: 3400mAh
Input: DC 5V 2A
Output: Type-C Interface, 3.5mm Audio Jack
Operating Temperature: Not specified
Storage Temperature: Not specified

Product Usage Instructions

Power On/Off

Press the power button once to power on the battery pack. The battery indicators will light up.
If the battery pack is not charging a device, it will automatically shut down after 60 seconds.
Double-click the power button to turn off the battery pack.

Charge the Battery Pack
Please ensure that the battery pack is fully charged before using it for the first time.

Charge the battery pack by connecting it to a power source (wall charger, computer, etc.) with a DC 5V 2A output using the provided USB charging cable.
The LED indicators will begin flashing in a breathing pattern to indicate the charging status.
When all LED indicators are lit and not flashing, it means the battery pack has been fully charged.

Frequently Asked Questions (FAQ)

Q: How can I extend the warranty coverage?
A: Register your purchase at nexigo.com/warranty within 14 days of delivery to extend your warranty coverage to TWO Years.
Q: What should I do if I encounter any problems with the product?
A: Contact NexiGo customer support at cs@nexigo.com for further assistance.

Scan the QR code or visit our link to download the latest manual or watch the installation video. nexigo.com/manuals.

WELCOME TO THE NEXIGO FAMILY!
Thank you for choosing the NexiGo S03 Battery Pack! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com anytime for further assistance. Make sure to register your purchase at nexigo.com/warranty within 14 days of the delivery date to extend your warranty coverage to TWO Years!

From all of us here at NexiGo, we want to thank you for your trust in us. We look forward to serving you again in the near future.

Yours Sincerely,
The NexiGo Team

CONTACT INFORMATION

Website: www.nexigo.com
Manufacturer: Nexight INC
E-mail: cs@nexigo.com
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR, 97005, US

PRODUCT INTRODUCTION

The NexiGo S03 Battery Pack is specially designed to extend the battery life of the Oculus Quest 2 Headset, allowing you to play for much longer than before. Its multiple charging protection functions prevent damage to your headset. It plugs into both the Type-C port and 3.5mm audio jack for greater stability, and the audio pass-through ensures the battery pack does not impede your use of headphones. Four battery level indicators let you know the remaining battery level at a glance.

PRODUCT DIAGRAM

3.5mm Audio Interface
Type-C Interface
Protective Cover
3.5mm Audio Jack
Type-C Input Port
Power Button
Battery Indicators (LED 1 to LED 4)

WHAT’S IN THE BOX

1 x 3400mAh Battery Pack
1 x Power Cable
1 x User Manual

SPECIFICATIONS

Battery Capacity 3400mAh
Related Input 5V=2A
Related Output 5V=1.5A
Operating Temperature 23°F – 113°F (-5°C – 45°C)
Storage Temperature 14°F – 140°F (-10°C – 60°C)

HOW TO USE THE BATTERY PACK

POWER ON/OFF

Press the power button once to power on the battery pack, and the battery indicators will light up. If it is not charging a device, the power bank will automatically shut down after 60 seconds.
Double-click the power button to turn off the battery pack.

CHARGE THE BATTERY PACK
Please ensure that the battery pack is fully charged before using it for the ﬁrst time. Charge the battery pack by connecting it to a power source (wall charger, computer, etc.) with a DC 5V=2A output using the provided USB charging cable. The LED indicators will begin ﬂashing in a breathing pattern to indicate the charging status, and when all LED indicators are lit and are not ﬂashing it means the battery pack has been fully charged.

LOW BATTERY ALERT
The battery indicator LED 1 will ﬂash white when the battery is below 3%. Please charge the battery pack by connecting it to a power source (wall charger, computer, etc.) with a DC 5V=2A output using the provided USB charging cable.

CHARGE THE QUEST ˜ HEADSET WITH THE BATTERY PACK

Match and plug in the Type-C and 3.5mm audio interfaces of the battery pack to the Oculus Quest 2 Headset. The battery pack will automatically wake up and power on. The four LEDs indicate that the headset is being charged.
Note: If the battery pack fails to wake up automatically, you can press the power button to turn it on.

IMPORTANT NOTES

Please only use the included USB cable with the battery pack. The use of other charging cables may cause damage to the power bank or your devices.
Ensure that the power bank is not stored or used in overly hot or cold temperatures. Prolonged exposure to heat or cold will adversely affect battery performance and longevity.
Avoid exposure to water.
Avoid dropping, throwing, or excessively vibrating the product, as this may damage its internal components.
Keep out of reach of children.
The power bank may be slightly warm after charging. This is normal.
Avoid contact with metal objects, as this may cause a short circuit.
Do not attempt to repair, disassemble, or modify the power bank under any circumstance. If the power bank malfunctions, contact NexiGo support at cs@nexigo.com.
Please turn the charger off before boarding an airplane and keep it off for the duration of your ﬂight.

FCC STATEMENT

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.