domli Pedestal Cabinet with Drawer Installation Guide
- July 23, 2024
- domli
Table of Contents
domli Pedestal Cabinet with Drawer
Specifications
- Number of pieces in the box: 48
- Product: Pedestal Cabinet with Drawer
- Tools needed (not included): Cross-head screwdriver
Product Usage Instructions
Assembly Steps
- Insert the metal dowels in the bottom panel and tighten them with a cross-head screwdriver.
- Connect the side panels with the bottom panel ensuring alignment with metal dowels.
- Insert and tighten Cam Locks in the side panel holes.
- Slide in the back panel and fit the top panel ensuring correct alignment with metal dowels.
- Secure the top and bottom hinge plates and attach door hinges.
- Fit the drawer slides and attach drawer sides to the back panel.
- Attach the bottom panel and secure it to the back with drawer back brackets.
- Attach drawer front brackets to the front panel and align with drawer sides.
- Insert completed drawer assembly into the cabinet by positioning correctly onto drawer runners.
- Attach wheels at the bottom of the cabinet.
- Insert back panel connectors and secure them in place.
Frequently Asked Questions (FAQ)
-
Q: What tools are needed for assembly?
A: You will need a cross-head screwdriver for assembly. Other tools are not required as they are included in the box. -
Q: What should I do if I encounter gaps while securing the back panel connectors?
A: Ensure there are no gaps between the connector and the inside corner of the back panel. Make sure they are evenly distributed before tightening them in place.
What’s in the box
Tools you’ll need
Not included in the box Do not over-tighten the screws.
Pedestal Cabinet with Drawer
Installation Guide
-
Please read the Safety Guidelines above before you start to assemble the product.
Insert the metal dowels in the bottom panel and tighten them with a cross-head screw driver until the threaded part is completely hidden. Do not over tighten the fittings. -
Connect the two side panels with the bottom panel making sure that all the metal dowels are correctly aligned with the corresponding side panels.
-
Insert the Cam Locks in the side panel holes, making sure they are flush with the panel surface and tighten them by rotating them clockwise with a cross-head screwdriver.
-
The back panel slides into grooves in the sides and top shelf. Orient it with the nice side fac-ing inside of the cabinet, and slide it into the grooves as shown. Fit the top panel by gently pushing it into place, making sure all the metal dowels are correctly aligned with the corresponding holes and lock it in place using the Cam Locks provided.
-
Align the top hinge plate holes with the side panel pre-drilled holes as shown in the above diagram. Secure the hinge plate in place with the provided screws. Repeat the process for the bottom hinge plate.
Attach the door hinges to the door using the provided screws and fit the door in place by clippig it to the door hinges. -
Fit the drawer slides using the hole pattern in the image and fitting them to the side panels pre drilled holes.
Attach the drawer sides to the drawer back panel with the provided screws. -
Attach the bottoma panel with the provided screws and secure it to tha back with the drawer back brackets. Holes on the bottom panel and back panel are pre-drilled. The Drawer Front is designed to be fitted with the drawer pull positioned either upwards or dawnwards.
-
Attach the Drawer Front Brackets to the draw-er front panel with the provided screws. The drawer front panel is pre-drilled in the correct positions.
Attach the drawer front panel to the drawer assembly by aligning the drawer front brachets with the drawer sides and push forward until the front panel clicks into place. -
Insert the completed drawer assembly into the cabinet assembly, by positioning correctly the drawer onto the drawer runners and pushing forward.
-
Attach the wheels at the bottom of the cabinet.
-
Insert the four back panel connectors in the side panel groove and secure them in place by tightening the provided screw. Before tighten-ing make sure there are no gaps between the connector and the inside corner of the back panel and they are evenly distributed as in the above image.
-
Insert the shelf support pins to set the shelf height position and put the shelf in place.
Job Done!
Safety First!
- Use caution when handling heavy or bulky components to prevent injury or damage to yourself and the product.
- Always wear protective equipment, such as gloves or safety glasses, when using power tools to avoid accidents.
- Do not over-tighten screws or bolts, as this can damage the components or compromise the stability of the product.
- Please follow the provided instructions carefully to ensure proper assembly and use of the product.
- Keep small parts away from children or pets, as they can be a choking hazard.
- Inspect the product for any defects or dam-ages before assembly, and contact us if you notice any issues.
- Please do not modify the product or use it for any purpose other than its intended use.
- Use caution when working with sharp tools or edges, and keep them away from children and pets.
- If you are uncertain about any aspect of the assembly process, seek assistance from a professional or contact us for further assistance.
- Do not sit or stand on the product.
- This product is not intended to support people or heavy objects. Avoid placing excessive weight to prevent damage and instability. MAX Weight Load 20Kg.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>