iclever BTH02A Kids Bluetooth Headphones User Manual

June 2, 2024
iclever

iclever  BTH02A Kids Bluetooth Headphones

INSTRUCTIONS

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG1

¡Clever is recommended by many authority media as the best kids headphones including Buzzfeed, Digital Trends, Louder, Medium, etc. Built with our patented Safe-Volume Technology, which protects children’s hearing with a volume limiter while providing crisp, clear sound. We’ve protected millions of children from hearing damage while helping millions of parents rest easy knowing their children are safe. iclever-BTH02A-Kids-Bluetooth-Headphones-
FIG2

whst’s in the box

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG3

Bluetooth Connection

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG4

Conenect to Bluetooth Device

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG5

Music Control

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG6

Phone Call

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG7

Music Control

  1. Previous Track : Press x3 Times
  2. Next Track : Press x2 Times

Phone Call

  1. Answer: Press x1 Times
  2. End Call : Press x1 Times
  3. Reject: Long Press 35

Product Diagram

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG8

Turn On The Headphones

Note : The headphones will automatically enter pairing mode when being switched on for the first time.

LED Indicator instruction

  1. Headphones Status : LED Indicator
  2. Power on : Blue indicator flashes 4 times
  3. Power off : Red indicator glows for 1s and goes off
  4. BT Pairing : The indicator flashes red and blue alternately
  5. BT Connected : Blue indicator flashes once every 7 seconds
  6. Low Battery : Red indicator flashes twice every 2 seconds
  7. In the charging process: The red indicator lights up sturdily
  8. Fully Charged : The LED indicator light will turn blue

Specifications

  1. Premium 40mm Dynamic Driver
  2. Frequency Response: 20Hz – 20K Hz
  3. Support: BT5.4, A2DP V1.2, AVRCP V1.5,HFP V1.5,HSP V1.2
  4. Bluetooth transmitter frequency range: 2.402- 2.480G Hz
  5. Bluetooth transmitter modulation: GFSK / 4DQPSK / 8DPSK
  6. Battery type: Lithium-ion Polymer(3.7V,500 mAh)
  7. Lithium Battery Energy Content : 1.85 Wh
  8. Battery charge time <2hrs
  9. Music play time 100hrs
  10. Weight: 0.15kg
  11. Maximum transmission power≤8dBm

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1)This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

iclever-BTH02A-Kids-Bluetooth-Headphones-FIG9

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals