iclever BTH13 RGB Cat Ear Wireless Bluetooth Kids Headphone User Manual
- June 4, 2024
- iclever
Table of Contents
iclever BTH13 RGB Cat Ear Wireless Bluetooth Kids Headphone User Manual
Package Contents
-
x iClever BTH1 3 Wireless Headphones
-
1 x User Manual
-
x 3.5mm Audio Cable
-
x USB Type—C Cable
Product Diagram
On/ Off
- Power on: Switch the button to the ”ON”direction. Then the LED indicator fleshes blue for 1 second, and the colorful lights are
- Shutdown: Switch the button to “OFF”direction, and the headphone. is turned off. The. LED indicator flashes blue for 1 second and then pees off.
Bluetooth Pairing
- In the power-on state, switch the button to the “ON” direction; the colorful lights are on; Bluetooth enters the pairing state, and the red and blue lights flash alternately.
- Turn on the Bluetooth of the mobile phone.Then find and select the”iClever-BTH13″Bluetooth pairing name in the device list for Bluetooth pairing Connection.
Light On/ Off
Short press the”Light On / Off” button tc turn on / off the light.
Volume Limit Gear Switching
- Press and hold the“+”&“-“buttons at the same time to switch the volume limit to 74dB, and the voice broadcast to “74dB”
- Press and hold the“+”&”-“buttons at the same time to switch the volume limit to 85dB, and the voice broadcast to “85dB” Press and hold the“+”&“-“buttons at the same time to switch the volume limit to 94dB, and the voice broadcast to “94dB”
Operation of Buttons
| Volume Up | Short press the ”+” button. |
|---|---|
| Volume Down | Short press the “-” button |
| Next Track | Press and hold the “+” button for 2 seconds. |
| Previous Track | Press and hold the “-“ button for 2 seconds. |
| Play / Pause | Press the MF8 button once. |
| Answer / End A Call | Press the MFB button once. |
| Reject A Call | Keep pressing the MFB button for seconds. |
| Activate Siri | Press the MF8 button twiue. |
| Clear The Pairing List | Press and hold the“+” button and ”-” button |
simultaneously for 4 seconds in the power-on state to clear the pairing list.Then the headphone will automatically enter pairing state.
Voice Prompt
| Power On | Power On |
|---|---|
| Power Off | Power Off |
| Pairing | Pairing |
| Successful Pairing | Connected |
| Disconnection | Disconnection |
| Low Power | Low Power |
Specification
- Frequency band: 2.4GHz-2.482GHz
- Maximum transmission power: 4dBm
How to Charge the Headphone
Connect the Type-C cable to the Type-C port on the headphone, and a SV power outlet (power adapter is not included). The indicator light will plow red to indicate charging. When the headphone is fully charged, the indicator light will change from red to blue.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in 0 residential installation. This equipment generates uses and
can radiate radio frequency enerpy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
Communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the
equipment off and on, the user is encouraged to try to correct the
interference by cne or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the fcllowing two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity
Hereby, Thousand shores Deutschland GmbH declares that the radio equipment
type Wireless Headphones BTH1 3 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the follcwing
internet address:
Http://files.i lever.com/BTH 13 DOC-EN.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>