iclever MD179 Wireless Mouse User Manual

iclever MD179 Wireless Mouse User Manual

Package Content

Diagram

1. Left Button
2. Right Button
3. Scroll Button
4. DPI Button
5. Forward Button
6. Backward Button
7. Connect Button
8. 2.4G/Bluetooth 1/Bluetooth 2 Channel Indicator *56 are not working for Mac OS.

Frequency Band

Maximum Transmission Power

Pairing Instruction

Diagram for 2.4G Connection

2.4G Connection

1. Lift the upper cover from the small groove at the tail of the mouse to take out the receiver.
2. Turn on the mouse.
3. Plug the USB Receiver into the computer port.
4. Click the Connect button to choose the 2.4G Channel.

Bluetooth Connection

1. Click the Connect button to choose Bluetooth 1/2 channel.
2. Hold and press the Connect button for 5s to Bluetooth pairing mode.
3. On your device, find the name of iClever Mouse 3.0 or iClever Mouse 5.0 and click to connect. (if your Bluetooth Version is higher than 4.0, please click iClever Mouse 5.0).

Switch among the connected device.
Click the Connect button to switch among connect devices.

FAQ

Switch among the connected device. Click the Connect button to switch among

connect devices.

Tips: the cannot-work and disconnection problems are usually caused by an incompatible external USB plug, poor USB port contact, or signal interference.

1. Verify the iClever is connected directly to the computer USB port instead of an external USB plug. 2. Make sure that the iClever and your device are within close proximity of each other. 3. Try moving away from metal and other sources of concentrated wireless signal. 4. Try removing other dongles or moving them away from iClever's receiver. 5. Charge the iClever for an hour.
2. Try using it on another device to verify the issue

Mouse Bluetooth doesn't connect or doesn't show up on the BT list

Tips: cannot-connect problems are usually caused by unreset Bluetooth or an incorrect pairing process. 1. Remove iClever's BT record on your device(if any). 2. Turn off Bluetooth and back on your device. 3. Follow the BT pairing instruction on the user manual. 4. Try using another device to verify the issue.

Cursor is not following the movements or moving slowly

1. Turn off the mouse and back on. 2. Charge the iClever for an hour. 3. Use a mouse pad or try on another surface. 4. Adjust the movement speed with the DPI button next to the scroll wheel. 5. Avoid using your mouse on Glass and other see-through surfaces.

Note: Feel free to email us to further resolve the issues if the FAQs above don’t work.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

Hereby, [Thousandshores Deutschland GmbH] declares that the radio equipment type [Wireless Mouse MD179] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address:
http://files.iclever.com/md179-eu-doc.pdf

Contact

support@iclever.com
support@iclever.co.jp

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>