eeese 2509 Dehumidifier Adam User Manual

: August 2, 2024
: eeese

Table of Contents

eeese 2509 Dehumidifier Adam
Product Information
Product Usage Instructions
Parts List
Operation Instructions
Cleaning
Trouble Shooting
Technical Specifications
Smart Connection Operation Guide
Adding Device Manually
Warranty
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eeese 2509 Dehumidifier Adam

Product Information

Specifications

Product Name: Dehumidifier Adam
Model: Art. 2509
Contact: info@eeese-aircare.com
Website : eeese-aircare.com

Product Usage Instructions

Safety Instructions

Warning: This appliance is intended for use in a domestic environment only. Any other use is not recommended and may cause fire, electrical shocks, or other injuries.

Power Cord Placement:

Do not pull the power cord to unplug the device.
Avoid putting heavy objects on the power cord.
Do not attempt to change the power cord without contacting the authorized service center.
Ensure the socket is earthed and appropriately secured.
Avoid using the appliance in an overloaded extension cord.

During Use

Turn off the power and unplug the cord before moving the appliance.
Supervise children to prevent them from inserting objects into the appliance.
Avoid pushing or impacting the appliance strongly.
Avoid placing hands on the air outlet to prevent injury or malfunction.

Parts List

Components

Control Panel
Handle
Air Inlet Grille
Drainage Outlet
Casters
Air Outlet
Rear Cover
Power Cord
Top Cover
Front Cover
Water Tank
Power button
Timer Off button
Up and Down Buttons
Fan speed button/Child lock button
Mode button
Manual Indicator
Laundry drying Indicator
High Fan Speed Indicator
Low Fan Speed Indicator
Humidity Reading Display
Timer Indicator
Tank Full Indicator
Defrost Indicator
On/Off Indicator Drainage
Drainage outlet
Drainage pipe (not included)

Prior to Operation

Place the dehumidifier in an upright position on a stable, flat surface.
Ensure the dehumidifier is at a safe distance at least 50 cm away from a wall or furniture.
Supply power should be in correspondence with the value on the nameplate, power outlet needs to be grounded.
Ensure the tank is correctly fitted, if the tank is full or not in place, the tank full light comes on and the dehumidifier will stop working.
Turn on the power and run the machine as per instructions below.

Continuous Drainage
In general, water will be collected by tank, if you want continuous drainage, please do steps as follows:

Remove the water tank.
Mount a drainage hose (14mm inner diameter) to the drainage outlet.
Put the water tank back in place.

Operation Instructions

Switch On / Switch Off The Unit [ Power button ] Connect to the power supply and press the power button once to turn on the unit. By default mode the unit runs on manual continuous dehumidifying with high fan speed. The on/off ndicator will be on.

Press the power button to turn off the unit, it will stop working, fan will work for some seconds to blow out the hot air inside the unit. When the machine is in standby mode, the on/off inicator will flash slowly.

Auto Shut-off Timer Function [ Timer button ] Press the timer button to select your preferred timer hour from 00-24-00 for automatic shut off setting by each press.

Auto timer off setting will be cancelled if the timer button is pressed 2 times in 3 seconds. Auto timer off setting will be cancelled if the unit is switched off and switch on again.

Humidity Setting [ Up and Down buttons ]

Press the up/down buttons to select your preferred humidity from CO-30%-35%-40%- 45%-50%-55%-60%-65%-70%-75%-80%-CO. CO means continuous dehumidifying regardless of ambient humidity. When the humidity in the room falls below the set value, the dehumidifier automatically turns off. The dehumidifier automatically restarts when the humidity exceeds the set value.

Fan Speed Option [ Fan Speed button ] Press the fan speed button to select your preferred fan speed setting of low and high to meet the different usage requirements.

Fan speed button is invalid at Laundry drying mode and Defrost mode.

Laundry Drying Mode

Press the mode button once to select Laundry Drying mode. The unit runs in continuous dehumidification with high fan speed for 6 hours then switch off automatically.

WiFi Function [ Timer button-2 seconds]

Press the Timer button for 2s to activate WiFi function and enter the distribution network mode, during the network configuration, the WiFi indicator flash quickly, after WiFi connected the indicator is on.

Detailed operation, please refer to the manual ”Smart Connection Operation Guide”.

Safety Childlock Function [ Fan Speed button-2 seconds ]

Press the Fan speed button for 2s to lock all buttons with a beeping sound, the same operation can unlock it.

Safety childlock function can be set at standby mode and working mode but can’t be activated when water tank is full.

Low Temperature Defrost Indicator

When the ambient temperature is too low, the dehumidifier will enter into defrost mode, the unit runs with high fan speed without dehumidifying.

Auto Shut off with Water Tank Full Indicator

The unit will enter into standby mode when the water tank is full or when the water tank is not installed properly. After emptying the tank, or installing the water tank properly, the unit will go on to the previous mode.

Except for the power button, all other buttons are invalid.

Memory Function:

When unplugged directly or power is cut, then reconnect to the power supply, the dehumidifier will run with the mode prior to the shutdown. The timer setting will be kept.
Press the power button to switch off the dehumidifier, and then press the power button to switch it back on. The dehumidifier will run with the mode prior to the shutdown. The timer setting will be cancelled.
Switch off the dehumidifier and unplug the power cord, then reconnect the power supply and switch on the dehumidifier. It will run in factory preset mode.

Cleaning

When used regularly, the filter may become clogged with dust and particles. Therefore the filter should be cleaned at least every two weeks.

Follow these steps:

Switch the device off and remove the plug from the socket before cleaning.

Clean the housing with soft, dry cloth. If the device is extremely dirty, use a mild cleaning agent. Wipe the dehumidifier with a slightly damp cloth. Never spray the device with water.

Remove the grate, clean the filter with a vacuum cleaner or soapy water no hotter than 40°C.

Rinse and dry the grate completely before installing back to the device.

Storage
If the dehumidifier will not be used for a long period of time, take the following steps:

Remove the plug from the socket and empty the tank, make sure the tank and the dehumidifier is completely dry. This may take a couple of days.
Clean the air filter.
Check the dehumidifier for perfect condition to ensure a safe use of it after a long period of storage.
Pack the device with the suitable packaging.
Store the dehumidifier in a dust-free location, and out of direct sunlight. Preferably covered with a sheet of plastic.

Display Error Codes
Please contact your local distributor if any of the error codes below appears.

Trouble Shooting

Check the following before contacting technical support .

Technical Specifications

Smart Connection Operation Guide

APP Binding Device
Search an APP platform for “TuyaSmart” or scan the following QR code to download the APP. Step One
Make sure the phone is connected to the WIFI at home, and turn on the Bluetooth device, tap the upper right corner of the home page + to add device.

Step Two
Follow the instructions to select the device to be configured, and then enter the password for the wireless network which should be on 2.4 GHz.

Step Three
Complete the connection to set the dehumidifier with APP.

Adding Device Manually

Step One
Tap Add Device on the home page or + in the upper right corner to go to the Add Device page.

Step Two
Confirm the indicator rapidly blink and enter the WiFi password.

Step Three
Complete the connection to set the dehumidifier with APP.

Service
If you need service or to make a warranty claim, you must create a case directly in our support system. Go to the website under SUPPORT. <https ://eeese-aircare.com/support>

Warranty

Limited warranty
We guarantee that all parts are free of defects in materials and workmanship for a period of two years from the date of purchase. The warranty covers only material or manufacturing defects that prevent the product from being able to be installed or operated in a normal way. Defective parts will be replaced or repaired. The warranty does not cover transportation damage, any use other than what is intended, damage caused by incorrect assembly or improper use, damage caused by impact or other error, or by improper storage. The warranty becomes void if the user modifies the product. The warranty does not include product-related damage, property damage or general operational loss. The manufacturer’s liability cannot exceed the repair or replacement of defective parts and does not include labour costs to remove and reinstall the defective part, transportation costs to and from the service center, and all other materials necessary to carry out the repair.

This warranty does not cover failure or malfunction as a result of the following:

Lack of proper installation, operation or maintenance of the unit in accordance with our published “User’s Guide” supplied with the unit.
The workmanship of any installation of the unit.
Misuse, alteration, accident, fire, flood, lightning strike, rodents, insects, negligence or unforeseen events.
Use of non-factory authorised parts or accessories in conjunction with the product.

Limitation of liability
This is the only warranty provided by the manufacturer. No one is authorised to make any other warranties on our behalf. This warranty is in lieu of all other warranties, expressed or implied, including but not limited to any implied warranty of fitness for a particular purpose and saleability. We expressly disclaim all liability for consequential damage, accidental damage, indirect loss or loss related to a breach of the expressed or implied warranty. This warranty gives you specific legal rights, which may vary by country.

Complaints
In the event of any warranty claim a valid purchase receipt must be presented. Read about raising a warranty-claim under the SERVICE section.

IMPORTANT!
If you need technical help – contact our customer service:
https://eeese-aircare.com/support

We have specialist knowledge of our products and the field in general, so you can get help quickly and easily.

Thank you for choosing this product. Please read this instruction manual before using it.

eeese air care
info@eeese-aircare.com
Web: eeese-aircare.com.
MV-2509-03-2024

FAQ

Q: Can I pour water into the appliance?
A: No, do not pour water into the appliance to avoid malfunction.

Q: Is it safe to use the appliance in a draughty place?
A: No, do not use the appliance in a draughty place to ensure proper functioning and safety.