FSR CB-324 Plus Universal Ceiling Enclosure Installation Guide
- August 2, 2024
- FSR
Table of Contents
FSR CB-324 Plus Universal Ceiling Enclosure
Product Specifications
- Model: CB-324+
- Input Voltage: AC power supply and POE power supply
- Output Voltage: 12 volts
- Power Supply Type: AC adapter and POE network
- Connector Type: 2-pin header, PWR DATA IN jack, 3-position output voltage selector switch
FAQ
Frequently Asked Questions
- Q: What should I do if the output voltage is not set to 12 volts?
- A: Make sure to set the 3-position output voltage selector switch to 12 volts as per the installation instructions. Incorrect voltage settings may lead to product malfunction.
- Q: Can I use a different adapter for the AC Power Supply?
- A: It is recommended to use the adapter supplied with the product to ensure compatibility and proper functioning.
Using Instructions
AC Power Supply
- Plug AC adapter into receptacles (supplied by others) and connect adapter output cable into 2-pin header on Fan Control Board.
POE Power Supply
- Install power supply in chassis as shown using provided screws.
- Connect POE network cable (supplied by others) from POE network to “PWR DATA IN” jack on POE power supply.
- Connect provided wire harness to POE Power Supply and to 2-pin header of Fan Control Board. 3-position output voltage selector switch MUST be set to 12 volts.
Installation Instructions
Contact
- 244 Bergen Boulevard, Woodland Park, NJ 07424,
- Phone: 973.785.4347
- Fax: 973.785.4207
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>