FSR PWB-CMU8-HNGWHT-C Hinged Cover Installation Guide
- June 10, 2024
- FSR
Table of Contents
FSR PWB-CMU8-HNGWHT-C Hinged Cover
MOUNTING
-
TO INSTALL THE FINISH COVER REMOVE AND DISCARD CONSTRUCTION COVER AND HARDWARE.
-
INSTALL HINGED COVER WITH HARDWARE PROVIDED. COVER CAN BE ROTATED 180 TO POSITION DOOR LATCH TO LEFT OR RIGHT SIDE OF DOOR.
HANDLE LOCK INSTALLATION
- REMOVE LOCK ASSEMBLY FROM BAG, THEN REMOVE SCREW, CAM AND NUT FROM LOCK.
- MAKE SURE LOCK HOUSING (NOTE LOCK PIN LOCATION) AND HANDLE ARE ORIENTED AS SHOWN, THEN SLIP LOCK ASSEMBLY INTO DOOR.
- INSTALL NUT ON LOCK HOUSING.
- ORIENT CAM AS SHOWN AND SECURE ONTO LOCK WITH SCREW.
FLUSH LOCK INSTALLATION
- REMOVE LOCK ASSEMBLY FROM BAG, THEN REMOVE C-CLIP FROM LOCK AND REMOVE CAM.
- INSERT KEY, ROTATE HOUSLING TO LEFT-HAND LIMIT, ORIENT KEY PARALLEL TO TOP OR BOTTOM DOOR EDGE, THEN SLIP LOCK ASSEMBLY INTO DOOR HOLE.
- INSTALL NUT ON LOCK HOUSING.
- ORIENT CAM AS SHOWN AND SECURE ON LOCK WITH C-CLIP.
Read User Manual Online (PDF format)
Loading......