LIMENTE 88200 Series Floor Socket Instruction Manual
- August 2, 2024
- LIMENTE
Table of Contents
LIMENTE 88200 Series Floor Socket
INSTRUCTION MANUAL
882001 – 882003
882007 – 882009
884005 – 884008
The 882001 floor socket is shown as an example.
The installation principle applies to 882001 – 882003, 882007 – 882009 and 884005 – 884008
1. Lock
2. Device carrier
3.Socket
4. Box
Assembly Instructions
1. Remove the lid. Then remove the device carrier from the box.
2. When (P) is glued to the insulation layer as a placeholderhen lay the conduits (L) and fix them (e. g. with adhesive tape) vertically to the polystyrene block (PB).
3. Insert the housing
4. Seal the housing
5. After curing, connect the sockets (3), screw the device carrier (2) back into the box (4) and insert the lid (1)
Instructions
In order to ensure a lasting function of the floor socket, the following instructions must be observed:
- Connection, repair or maintenance must be carried out by a trained specialist? During installation and commissioning gloves must be worn?
- For the installation of the floor socket, a solid surface (for example screed, concrete) must be present?
- When installing on an unpaved surface, the floor socket is not walkable?
- The connecting cable must have a cross-sectionin accordance with the VDE regulation?
- If cable glands are used, they should be suitable for the corresponding cable cross-section and have an appropriate degree of protection?
- When using the leveling screws for height correcting the lid, the floor socket is only walkable?
- Care instructions: The product is suitable for dry care (liquid-free or low-liquid (mist-moist) cleaning methods are used)? In addition, no acid-, chloride- containing or alkaline products may be used for cleaning?
- Despite manufacturing inspection, sharp edges or corners on housings, lids, or other components may occur during the manufacturing process?
- In the case of mechanical damage or other defects (technical/electrical), it is not allowed to put the product into operation?
- The product is in compliance with the national regulations to dispose.
Errors and technical changes reserved.
Subject to errors and technical changes.
Frequently Asked Questions (FAQ)
Q: How do I ensure a secure connection of the sockets?
A: Make sure to properly align and connect the sockets as per the assembly instructions. Use appropriate tools for tightening.
Q: Can I use this floor socket with different floor materials?
A: The floor socket is designed for use with specified floor materials. Using it with other materials may affect its performance.
Q: What should I do if I encounter technical issues with the product?
A: Contact our customer support for assistance with any technical problems or errors encountered during usage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>