LIMENTE SMART 500 Smart Sensor Instruction Manual
- October 30, 2023
- LIMENTE
Table of Contents
LIMENTE SMART 500 Smart Sensor
Product Information
The LIMENTE SMART 500, 511, 512 is a lighting system that includes LED lights and sensors. The system has a wattage of 0-96W and operates at 24V or 4x24V. The product is manufactured by Limente and can be found on their website.
Product Components
- LIMENTE SMART 500
- LIMENTE SMART 511 PIR SENSOR
- LIMENTE SMART 512 IR SENSOR
- 4x LED 640500
- 1-4x PIR-SENSOR
Product Usage Instructions
- Assemble the LIMENTE SMART system according to the assembling instructions provided.
- Connect the system to a power source.
- Choose the desired mode for the PIR and IR sensors using the ON/OFF switch.
- For IR sensor, choose the desired mode using the ON/OFF switch and adjust the dimming level using the dimming cycle.
- The LED lights will respond to the sensors based on the chosen mode.
Note: Please refer to the assembling instructions provided for additional information on how to assemble the LIMENTE SMART system.
Technical data
NOTE!
Together with Limente 640500 must always be used a suitable 24 V DC -driver.
Guaranty is not valid for damages caused by using wrong type of driver. The
sensor part must not be installed close to reflecting materials (f.ex. S/S
sink or fluorescent lamp). Reflections may cause unwanted switching. In case
it happens the sensor must be moved to a place where reflections don’t disturb
it’s function. Installation must be done in a way that reinstalling for both
lamps, driver and Smart 500 are possible without removing f.ex. fixed
furniture. It must also be done by a competent person according to valid
rules.
LIMENTE SMART 500, 511, 512
**CHOOSE FUNCTIONS
**
****
Documents / Resources
|
LIMENTE SMART 500 Smart
Sensor
[pdf] Instruction Manual
640500, 640511, 640512, SMART 500 Smart Sensor, SMART 500, Smart Sensor,
Sensor
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>