ALTRONICS Touch Series TWS Wireless Bluetooth Earbuds User Manual
- June 3, 2024
- ALTRONICS
Table of Contents
ALTRONICS Touch Series TWS Wireless Bluetooth Earbuds
Functional Diagram
HOW TO USE
TO CHARGE CHARGING CASE
- Connect the lightning cable to Lighting on the charging case
- Plug the USB connnector of the cable into a USB Power source
- The indicator light will show Orange while the charging case is charging.Depending on the power delivered to the charging case, the charging case will take approximately 90mins or more to completely charge
- The Green light on for 1 minute when the case is fully charged
WIRELESS CHARGING
| NO. | Item | Specification |
|---|---|---|
| input | 155mA(Max Input) | |
| Wireless charger input | SV | |
| Wireless charger |
temperature
| • 2occ-sooc
4| Wireless charger power| SV=0.15 0.75W
| Wireless Charging Time| About O mins
|
Status of indicator light
| Orange light on when charging and Green light on for oneminute when fully charged
- Please use QI standard charging pad
TO CHARGE EARPHONES
- Put the earphones in the charging case correctly, charging case will start to charging automatically
- The green indicator light flash slowly when the left earphone is charging
- The white indicator light flash slowly when the right earphone is charging
- Both left and right earphone are charging when green and white light flash alternately
- The indicator light will turn OFF when fully charged
POWER ON ANO PAIRING
-
Open the cover of charging case, both earphones will AUTO-ON and AUTO-PAIRING, both earphones will response with a voice prompt: “Dong” when connected with mobile phone successfully
FOR IOS: A window pops up indicating earphones is ready to connect, just click”Connect”, press and hold the button on the charging case for about 7s to display “connecting”. At this time, the pop-up window of your iPhone will show you the power juice of both headset and charging box.
FOR ANDROID OS: Enable the bluetooth pairing mode on your phone device. Tap on”Airplus Pro-RT “to connect. And both earphones will response with a voice prompt: “Dong” when connected with mobile phone successfully
-
Earphones will response with a voice prompt: “Dong” when bluetooth signal is cut off, and shutdown 3mins later automatically
- Put the earphones in the charging case correctly, earphones will AUTO-OFF
- Earphone will shutdown automaticlly in 3mins after disconnected with devices
- Touch either earphone for 12s to shutdown manually
*The battery status of earphones is visible on connected devices when it’s running out of power, the earphones will remind you with a voice prompt: “DU, DU”, pis recharging in time.
PHONE & MUSIC
-
To Answer Call
Touch either earphone one short -
To End Cal
Touch either earphone one short -
To Reject Call
Press either earphone for 1 second -
To Play and Pause Music
Touch either earphone one short -
To Play the nexU previous song
Touch the right(left earphone twice for next(previous)song
VOICE ASSISTANT
ANC model:Press left earphone about 1.5 seconds after hearing a prompt
tone”di” and release to activa Siri or voice assistant
MODIFY BLUETOOTH NAME
In the bluetooth setting of mobile phone, click the bluetooth name to jump to
the input box of modifying bluetooth name, Enter the new bluetooth name and
click finish.
LOCATE FUNCTION
Open the search APP, find the device bar and select the headset device
relative to it, the location of earphone will be shown on the map. ©In-ear
Sensor
- Turn on/off the in-ear sensor
- I0S: turn on/off in-ear sensor on the interface of bluetooth setting
- Andorid: touch and hold either earphone for Bs to tum on/off
- Both of Single or TWS mode, the first in-ear earphone will have a prompt tone”dong” when you put on. When you are playing music it will play/pause automaticlly when you put on/take off earphone
ANCMODE
Touch and hold the Right earphone for 1.5 seconds and release after hearing a
prompt tone “DI”, you can switch over ANC mode/ Transparency mode and Close
mode at your disposal
PROMPT TONE
| Prompt item | Prompt tone description |
|---|---|
| Turn off | Prompt tone” |
| Connect the mobilephone | Prompt tone” |
| Disconnect | Prompt tone” |
| Low battery alert | Prompt tone” |
CHARGING CASE SPECIFICATION
| Item | Product status | Description |
|---|---|---|
| Capacity | 360mAh | |
| Charging methods | Li g htin g | |
| Input | 3.7V | |
| Charging time | About mins | |
| Cruising ability | Circularly charging about 3-4times(bouth earphone) | |
| **** |
Charging case
| Orange light ON (Charging)
Green light on for 1 minute
| ****
Earphones charging status
| Green light flash slowly when left earphone charging
White light flash slowly when righr earphone charging
Both left and right earphone are charging when green and white light flash
alternately
EARPHONE SPECIFICATIONS
| NO. | Item | Specification |
|---|---|---|
| Frequency response range | 20HZ-20KHZ | |
| Product impedance | 320 | |
| Capacity | 30mAh | |
| **** |
Sensitivity
| ****
113±3dB
| Product Size| 60.8’22’45mm
| Bluetooth operation distance| 15meters(standard environment
| Weight| ****
7.6g(Not including storage box)
| Bluetooth version| 5.2
| Transmission range| 2402-2480MHz
10| Supporting agreement| HFP HSP A20P AVRCP
11| Transmission frequency| 2.4GHz band(2.4000-2.4835GHz)
12| Charging time| 60minutes(earphone)
13
| ****
Lifetime
| Talk time:about; 4.5 hours
Music paly time:About 5 hours ( Max volume) Standby time:About 520days {connnected w/phone)
14| Product working temperature| -10 C-45 C
15| Product storage temperature| -20C-70C
SAFETY PRECAUTIONS
Please read follow and keep these instructions:
- Keep the device out of extreme heat and humid
- Power time may different depending on personal habits
- Heed all warnings on the product and in the operation instructions
- Do not listen at high volume level for long period to protect hearing
- Stop using this product immediately if it causes discomfort or pain
INSIDE THE BOX
- Bluetooth Headset X 2PCS
- .Charging Case X1PCS
- USB Lighting charging cable X1 PCS
- User Manual X1 PCS
- Silicon Earcaps X6PCS