AWQM 8CKAIQ0IC PU Leather Accent Chairs for Living Room Instructions
- June 2, 2024
- AWQM
Table of Contents
AWQM 8CKAIQ0IC PU Leather Accent Chairs for Living Room
Assembly Instructions
Step 1: Attaching the Arms
Begin by taking the pieces labelled as A and B. Attach the arms to both pieces by using the screws labelled J. There is a close-up inset that shows the screws J should be screwed into the arms about 2cm deep.
Step 2: Assembling the Base Frame
The base frame is shown with multiple screws and brackets in place. There is an inset showing a detailed view of the bracket labeled L with screws labeled K and M. Two screws M are to be used on each side of bracket L , and the bracket is to be attached to the larger frame with screws labeled K.
Step 3: Attaching the Side Panels
With the base frame laid out flat, attach the side panels (not labeled) to the base frame. The side panels are to be fitted on either side of the base cushion labelled D.
Step 4: Installing the Base Cushion
Place the base cushion labeled D into the centre of the assembled frame. Ensure it is seated properly within the frame.
Step 5: Securing the Backrest
The final step involves attaching the backrest labeled C to the frame. An inset shows a close-up of the brackets on the backrest being aligned with the corresponding brackets on the frame. These should be secured firmly to complete the assembly.
Specifications
| Component | Description |
|---|---|
| A, B | Arms of the furniture with pre-drilled holes for screws |
| C | Backrest cushion |
| D | Base cushion |
| F, G, H, I | Brackets and screws for securing the backrest to the frame |
| J | Screws for attaching arms, 2cm penetration depth |
| K, M | Screws for attaching bracket L to the frame |
| L | Bracket for securing the frame |
FAQ
- What is the correct depth for screwing in the arms?
- The screws labeled J should be screwed into the arms about 2cm deep.
- How do I secure the base cushion labeled D?
- The base cushion D should be placed into the center of the assembled frame and seated properly.
- What is the purpose of bracket L?
- Bracket L is used for securing the frame together with screws K and M.
- How is the backrest attached to the frame?
- The backrest labeled C is attached by aligning and securing the brackets on the backrest with the corresponding brackets on the frame.
Installation Instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>