PROAIM ST-CNPV-SS Cinema Pro Arm and Vest for Handheld Video Camera Installation Guide

ST-CNPV-SS Cinema Pro Arm and Vest for Handheld Video Camera

Specifications

• Product Name: Cinema Pro Arm & Vest for Handheld Video
  Camera Stabilizers (ST-CNPV-SS)

• Load Capacities: 15-29kg / 33-63.8lb

• Warranty: One-year warranty from the date of purchase

Product Usage Instructions

Cinema Pro Vest Camera Support System Setup

Ensure all components listed in the manual are present before
proceeding with assembly.

Spring Core Swapping

The Proaim Cinema Pro Arm comes with three swappable spring
cores for different load capacities. Choose the appropriate core
based on your equipment’s weight.

Arm Post Swapping

Use the provided wrench kit to swap between 1/2 & 3/8 Arm
Posts as needed for your setup.

Socket Swapping

The mounting socket blocks allow for zero friction or friction
settings. Select the desired setting for precise control over arm
movement.

Tension Adjustment

Quickly adjust spring tension using the QR Bolts located at each
end of the arm.

Vest Assembly

Follow the instructions to assemble the vest for comfortable and
secure wear.

Vest Height Adjustment

Adjust the height of the front plate for operators between 5.5′
to 6.5′ for an ideal fit.

Socket Block Height Adjustment

Adjust the height of the socket block to suit your preference
and comfort level.

Cinema Arm Mounting

Securely mount the Cinema Arm to your stabilizer following the
provided guidelines.

Stabilizer Mounting

Mount your stabilizer onto the Cinema Arm for a complete setup
ready for use.

FAQ

Warranty Information

We offer a one-year warranty from the date of purchase. Please
refer to the warranty section in the manual for details on coverage
and terms.

Contact Information

If you have any concerns or issues with the product, please
contact us immediately for assistance and support.

1
Cinema Pro Arm & Vest for Handheld Video Camera Stabilizers (ST-CNPV-SS)
Assembly Manual

What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
2 x Blue Spring cores 5/8″ Arm Post

Cinema Arm Pro

2 x Orange Spring cores

2 x Purple Spring cores

Cinema Arm Pro Vest

Spring Covers

2 x O-Rings

Front Socket Spring Pack

Wrench Kit

Socket

1/2″ & 3/8″ Arm Posts

Spring Spare kit

2x Rubber Bumper Spares 10mm Spanner

5mm T-Type Allen Key

All rights reserved.

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.

2

Bag Packing

INDEX

Sr. No
1 2 3 4 5 6 7 8 9 10 11

Particulars
Cinema Pro Vest Camera Support System Setup Spring Core Swapping Arm Post Swapping Socket Swapping Tension Adjustment Vest Assembly Vest Height Adjustment
Socket Block Height Adjustment Cinema Arm Mounting Stabilizer Mounting Final Setup

Page No.
3 3-4 4-5 5-6 6-7 7-8 8-9 10 10-11 11 11

3
Cinema Pro Vest Camera Support System Setup
Spring Core Swapping
· Loosen the bolt of the spring bracket using the 10mm spanner and remove it.
· Now, carefully remove the Spring bracket from the Spring core’s top and remove the Spring core.
· Follow the same process to remove the second Spring Core.
· Insert the Orange Spring core into the Cinema Arm, as shown in the video.
Feature: The quick Swap Spring is designed to minimize downtime by allowing for quick and easy spring changes. · Insert the Spring bracket into the Spring
core’s top.
· Then, insert the Spring bracket into the Spring core’s bottom.
· Tighten its bolt using the 10mm spanner.

4
· The orange spring core is securely attached to the Cinema Arm.
· Repeat the same process to attach the other Spring cores.
Feature: The Proaim Cinema Pro Arm is equipped with three swappable spring cores tailored for different load capacities, ranging from 15-29kg / 33-63.8lb.

15 Kg-22 Kg / 33 lb-48.5 lb

20 Kg-25 Kg / 44 lb-55 lb
Arm Post Swapping
· Loosen the bolt and remove the cap using the 5mm Allen key.

25 Kg-29 Kg / 55 lb-63.8 lb

· Then, carefully remove the 5/8″ Arm Post.

5
· Now, securely insert the 1/2″ Arm Post. Feature: With three types of arm posts (1/2 “, 3/4 “, 5/8”), our combo offers comprehensive mounting options compatible with various steady cam stabilizers and rigs, including Zest and Equator. · Insert the cap into the arm post. Feature: You can attach it to poles or a rickshaw using a hard mount for added flexibility.
Socket Swapping
· Loosen the Socket knob. · Then remove the Socket and flower knob.

6
· Now, attach the Socket to the Socket block and carefully insert the knob.
· The Socket is securely attached to the socket block.
Feature: The two mild steel mounting socket blocks allow you to choose between zero friction and friction settings for precise control over arm movement.
Tension Adjustment
· Loosen the QR bolt of the Socket Bracket using the 5mm Allen Key.
· Then, adjust the spring tension as per your requirement.
Feature: QR Bolts on each end ensure a quick Spring Tension Adjustment.

7
Vest Assembly
· Loosen the buckles of both the shoulder and waist ratchet belts from each side.
· Then, open the ratchet belts from both sides.
· Detach the Velcro from back side of the vest.
· Then, loosen or tighten the belt as per your comfort.

8
· After adjusting the belt, re-attach the Velcro.
Vest Height Adjustment
· Loosen both bolts on the front plate using the 5mm Allen Key.
· Then, adjust the height of the Cinema vest Upward or downward, as per your convenience.
NOTE: Height Adjustment of the Front Plate offers an ideal fit for operators from 5.5′ to 6.5′ in height.
Height Adjustment
· Re-tighten the bolts after adjusting the height.

9
· Wear the vest. · Attach the waist buckles on both sides &
tighten them as per your convenience.
· Now, attach the shoulder buckles on both sides & tighten them.
· Tighten the shoulder Velcro straps to a snug position.
Feature: The Shoulder Strap’s articulation from the front is designed to provide a comfortable fit over the Trapezius Muscle near the neck.

10
Socket Block Height Adjustment
· Loosen all bolts of the Socket block using the 5mm Allen Key.
· You can also adjust the height of the Socket Block.
· Then, re-tighten all bolts using the 5mm Allen Key.
Cinema Arm Mounting
· Loosen both knobs of the Socket Block.
· Then, insert the male connecting Socket of the Arm into the Socket Block of the Vest.

11
· After inserting the Arm, tighten both the knobs of the Socket Block.
· Your Arm is securely attached to the vest.
Stabilizer Mounting
· Now, mount the Stabilizer (Not Included) on the Arm post.
NOTE: When attaching the Stabilizer to the Arm and vest, keep the Stabilizer’s handle straight by the Arm’s pin. · Your setup is ready to use.
YOUR PROAIM CINEMA PRO VEST CAMERA SUPPORT SYSTEM ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

12
Warranty: We offer a one-year warranty for our products from the date of purchase. Within this period, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs, nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by us.
Liability: We are not liable for damage caused by products we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product or service by anyone other than our company.
Contact Us: If you are dissatisfied, please contact us immediately. We promise our utmost support and care until you use our product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>