Moonboon HMNL03 White Noise Machine User Manual
- July 31, 2024
- moonboon
Table of Contents
HMNL03 White Noise Machine
“`html
Product Information
Specifications
-
Rated working voltage: DC5V
-
Rated Working current: 700mA
-
Rated power: 3.5W
-
Power supply: Built-in rechargeable lithium battery
-
Works with DC5V power supply
-
Light source: High photosynthetic efficiency semiconductor
LED -
Colour temperature: 3000 Kelvin (Warm)
-
Sleep sounds: 10 different relaxing sleep sounds
How to Use the White Noise Machine
-
Charge the white noise machine for at least two hours before
first use. -
Reveal the USB output port at the top of the machine by
unfastening the rubber plug. -
Insert the USB charging cable into the charging plug and
connect it to a power outlet with a voltage of 5V and a current of
more than 1A. -
While charging, the charging light next to the USB output will
light red. The battery is fully charged when this light turns
green. -
The battery fully charges in 3 hours, providing approximately
thirty hours of playtime (20 hours with the light on). -
To turn on the machine, press and hold the ON/OFF button for
two seconds, then press either sound button to play your selected
sound.
Buttons and Functions
-
ON/OFF BUTTON: Press and hold for two seconds
to turn the machine on/off. -
VOLUME BUTTONS (+ and -): Adjust volume
settings and choose from five sound levels. -
NIGHT LIGHT BUTTON: Press and hold for two
seconds to turn the night light on/off. -
LOCK/UNLOCK SWITCH: Lock/unlock current
settings to prevent changes. -
RESET BUTTON: Use to reset the machine if
needed. -
SOUND BUTTONS: Cycle through and select
different sounds.
Sounds
The white noise machine offers ten relaxing sleep sounds,
including womb sounds, mom’s heartbeat, white noises, TV static,
boat motor, air conditioner, pink noises, calm waves, rustling
leaves in the wind, and soft summer rain.
FAQ
Q: What should I do if the light cannot turn on?
A: Please make sure to charge the machine properly following the
instructions provided in the user manual. If the issue persists,
contact customer support for further assistance.
“`
USER MANUAL
UBsreurgeMrmaannuuaal
1
WMohoitnebNooonisselynSgpeevuagkgeer
WHITE NOISE MACHINE
Important: Read the user manual carefully and keep it for future use.
SPECIFICATIONS
Rated working voltage: DC5V Rated Working current: 700mA Rated power: 3,5W
Power supply: Built-in rechargeable lithium battery
Works with DC5V power supply Light source: High photosynthetic efficiency
semiconductor LED Colour temperature: 3000 Kelvin (Warm) Sleep sounds: 10
different relaxing sleep sounds
WHAT’S INCLUDED
· 1x White noise machine · 1x USB charging cable
UBsreurgeMrmaannuuaal
2
WMohoitnebNooonisselynSgpeevuagkgeer
HOW TO USE THE WHITE NOISE MACHINE
The white noise machine must be charged for at least two hours before first
use. To charge, reveal the USB output port at the top of the white noise
machine by unfastening the rubber plug. Next, insert the USB charging cable
into the charging plug and connect it to a power outlet with a voltage of 5V
and a current of more than 1A. While charging, the charging light next to the
USB output will light red. The battery is fully charged when this light turns
green.
The battery fully charges in 3 hours. With a fully charged battery, the white
noise machine can play for approximately thirty hours (20 hours when the light
is simultaneously turned on).
The first time you turn the white noise machine on, press , hold for two
seconds, and then press either or to play your first sound.
Charging light
UBsreurgeMrmaannuuaal
3
WMohoitnebNooonisselynSgpeevuagkgeer
Timing indicator
Lock/Unlock switch
Charging port
Reset button
Sound button #1
Sound
Timer
button #2 button
On/Off button
Night light Volume
button
buttons
BUTTONS AND
FUNCTIONS
ON/OFF BUTTON Press and hold the button for two seconds to turn the white
noise machine on. The white noise machine will play the sound it played before
being turned off.
Press and hold the ON/OFF button for two seconds again, when you wish to turn
the white noise machine off.
SOUND BUTTON 1 WOMB SOUNDS Press once to activate the sounds. Press the
button again to cycle through to the next sound. See the section SOUNDS for a
list of the different sounds.
SOUND BUTTON 2 WHITE, PINK, AND BROWN NOISES Press once to activate the
sounds. Press the button again to cycle through to the next sound. See the
section SOUNDS for a list of the different sounds.
VOLUME BUTTONS: “+” AND “-” Press the buttons to adjust the volume setting.
“+” increases the volume. “-” decreases the volume. Choose from five sound
levels.
TIMER BUTTON Adjust how long the white noise machine will be playing /will be
turned on. Press to choose between the different timer programs: · Default: No
timer (will play until the battery runs out) · Press the button once: 60
minutes · Press the button twice: 120 minutes
A small blue light will light up and indicate the chosen timer setting. No
light indicates that the timer is in Default mode.
NIGHT LIGHT BUTTON Press and hold the button for two seconds to turn the night
light on. Press and hold the button for two seconds again to turn the night
light off.
UBsreurgeMrmaannuuaal
4
WMohoitnebNooonisselynSgpeevuagkgeer
Please note
Switch between and to lock and unlock your current settings. When in the
locked position, it is not possible to change the settings.
Please note
Charge the machine if the light cannot turn on.
SOUNDS
Moonboon has developed a white noise machine specifically to help babies and
children sleep better. The white noise machine comes with ten relaxing sleep
sounds of varying intensity.
SOUND BUTTON 1 WOMB SOUNDS Has two relaxing sounds to resemble the sounds
inside the womb. Choose from a mother’s calming heartbeat, the sound of blood
rushing through the body, and the mother’s rhythmic breathing.
Press once to activate the sounds. Press the button to cycle through the
following sounds:
Womb sounds #1 Mom’s heartbeat #2 Womb sounds
SOUND BUTTON 2 WHITE, PINK, AND BROWN NOISES Features a selection of white,
pink, and brown noises. Sounds that you would hear at home or in nature.
Press once to activate the sounds. Press the button to cycle through the
following sounds:
White noises #1 Tv static #2 Boat motor #3 Air conditioner
Pink noises #4 Calm waves #5 Rustling leaves in the wind #6 Soft summer rain
Brown noises #7 Thunder and rain #8 Crackling bonfire
UBsreurgeMrmaannuuaal
5
WMohoitnebNooonisselynSgpeevuagkgeer
Please note
Switch between and to lock and unlock your current settings. When in the
locked position, it is not possible to change the settings.
RESET SETTINGS
Unfasten the rubber plug at the top of the white noise machine to reveal the
USB output port and the reset button. To reset to factory settings, insert a
paper clip into the hole and press down for five seconds.
CLEANING SETTINGS
Clean the white noise machine with a damp cloth without soap or detergent. Do
not use soap or other chemicals on the white noise machine. Keep the machine
away from water and dirt.
DISPOSAL
Never dispose of your product with other household waste. Please inform
yourself about the local rules on the separate collection of electrical and
electronic products. The correct disposal of your old product helps prevent
potentially adverse environmental and human health consequences.
UBsreurgeMrmaannuuaal
6
WMohoitnebNooonisselynSgpeevuagkgeer
User Manual
7
White Noise Speaker
SAFETY CHECKLIST
Carefully read the safety checklist below. When you have checked the list and verified that everything is as described, you may begin using the white noise machine. Enjoy!
· For indoor use only. Do not use it in direct sunlight, near an open fire, or close to heat-radiating products such as electric heaters.
· Switch off the product after use. · Do not place machines right next to a baby’s ears.
· Do not use the white noise machine near water, such as a bathtub, swimming pool, faucet, or basin.
· Do not drive or operate heavy machinery while listening to the white noise machine.
· It is not possible to replace the LED light inside the white noise machine.
Instead, replace the whole white noise machine when the LED light stops
working.
· After purchasing the product, please charge it for more than two hours
before first use. It takes about three hours for the white noise machine to
charge fully.
· Use the product frequently to make the best use of the internal battery.
Charge the white noise machine every two months for three hours or more to
ensure the longest possible battery life.
· The input voltage to the product is DC 5V 1A. Charge the machine with the
charging cable that comes with the product to operate the product safely.
· If you have difficulty hearing or hear ringing in your ears, please
immediately discontinue listening to the white noise sounds and consult an
audiologist or your physician.
· Please consult your physician if you have significant difficulty sleeping
regularly, experience fitful/restless sleep, or feel tired during the day.
· Moonboon’s white noise machine is equipped with a lithium battery. When
flying, it is recommended to keep devices with lithium metal or lithium-ion
batteries (such as the white noise machine) in your carry-on luggage.
Please note
Make sure to check regularly that the white noise machine meets all safety
requirements.
User Manual
8
White Noise Speaker
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>