RUIGE M62 TWS Bluetooth Earphones Instruction Manual
- July 31, 2024
- RuiGE
Table of Contents
RUIGE M62 TWS Bluetooth Earphones
Specifications:
- Bluetooth Version: Bluetooth 5.0
- Audio Codecs: AAC/SBC
- Transmission Range: 10m
- Frequency Range : 2.402GHz~2.480GHz
- Frequency Response: 20Hz~20KHz
- Driver Size : 14mm
- Sound Pressure Level : 115dB ± 3dB
- Impedance: 32 ohms ± 15%
- Output Power: 3mW
- Battery Capacity (Earbuds): 3.7V-4.2V/90mAh
- Battery Capacity (Charging Case): 3.7V-4.2V/300mAh
- Charging Port: USB Type-C
- Charging Time: 8 hours (case), 1.5 hours (earbuds)
- Playback Time: 1.5 hours
- Standby Time: up to 300 hours
Product Usage Instructions
Power On/Off:
Power On: Take the earbuds out of the charging case to automatically turn them on. The blue light indicates they are on.
Power Off: Place the earbuds back in the charging case to turn them off or press and hold the function button for 3 seconds. The red light will flash three times to indicate powering off.
Pairing:
The left and right earphones will enter pairing mode automatically after powering on. Once paired, the main earbud’s lights will flash alternately.
Language Toggle:
To switch between Chinese and English prompt tones, tap any ear function button twice when the device is not connected.
Smart Device Connectivity:
Once paired, open the Bluetooth list on your smart device and select ‘M62’ to connect. A prompt tone will indicate a successful connection.
Music/Game Mode:
In music mode, tap the earphone function buttons to control playback, volume, and voice assistant. Double-click to answer or reject calls.
FAQ
- Q: How do I know if the earbuds are fully charged?
- A: When charging, the indicator lights on the earbuds will turn solid red. Once fully charged, the red lights will turn off.
- Q: Can I use only one earbud at a time?
- A: Yes, you can use either the left or right earbud independently for mono audio playback.
Introduction to product operation
Headset parameters
- Product name : M62
- Bluetooth version: Bluetooth 5.0
- Support mode : AAC/SBC
- Bluetooth transmission distance :10m
- Carrier frequency: 2.402GHz~2.480GHz
- Frequency response range: 20Hz~20KHz
- Horn size : 14mm
- Horn sensitivity: 115dB 3dB
- Horn impedance: 32 15%
- Horn rated power :3mW
- Headphone battery capacity : 3.7V-4.2V/90mAh (polymer battery)
- Charging bin battery capacity: 3.7V-4.2V/300mAh (polymer battery)
- Charging interface: USB Type-C
- Headset use time :≈8 hours
- Earphone single charging time :≈1.5 hours
- Charging time : ≈1.5 hours
- Charge the headset : ≈2 times
- Shutdown standby time :≈300 hours
Simple troubleshooting
The name and content of the hazardous substance in the product
This table is prepared in accordance with the provisions of SJ/T11364.
0: It means that the content of the hazardous substance in all
homogeneous materials of the part is below the limit specified in GB/T 26572.
X: It means that the content of the hazardous substance in at least one
of the homogeneous materials of the part exceeds the limit requirements
specified in GB/T 26572.
Note: The reason why this product is marked with an “X” is that there are
no alternative technologies or components to choose from at this stage.
Safety guidelines
- Before using this product for the first time, please fully charge it before using it.
- The product is not a toy, and children under the age of 12 must be used under the supervision of an adult.
- Please use a 5V/1A charger that has passed the safety certification of a regular manufacturer to avoid damage to the product caused by a fast-charging charger that supports high voltage.
- Please charge in a safe environment, when charging the charging case, please pull out the charging cable as soon as possible after the power is fully charged to avoid damage to the battery caused by long-term charging. The charging method of the charging case is the Type-C interface.
- This product has a built-in non-removable rechargeable battery and repeated charging and discharging of the earbuds will lead to a decrease in battery performance over time, which is normal for all rechargeable batteries.
- This product comes with a healthy battery, if it has not been used for a long time, please charge it at least once a month.
- If you feel skin discomfort when wearing it due to individual differences, please stop wearing it and consult a doctor.
- When using this product with a Bluetooth connection, please adjust the sound of the earphones to an appropriate volume to avoid hearing damage caused by long-term loud volume.
- If you use this product while engaging in activities that require concentration, you should pay attention to your own safety and the safety of others, such as when driving or cycling, on roads, construction sites, railways, or walking. You should remove your headphones or adjust the volume to ensure that you can hear the sounds around you, including alarms and warning signals.
- Please follow the relevant regulations of your region or country and use this product as required when driving.
- This product contains magnetic materials, please keep away from electrical appliances with strong magnetic or electric fields, such as microwave ovens, refrigerators, etc., when using or placing the product.
- It is recommended to use this product in an environment with a temperature of -0°C~45°C. When the ambient temperature is below +5°C, battery performance is limited.
- Do not use this product in places where it is expressly prohibited to use wireless equipment, otherwise, it will interfere with other electronic equipment or cause other dangers.
- Before approaching medical or industrial equipment or boarding a plane, please ask the local staff if they can use it.
- Before cleaning and maintaining this product, stop using this product, turn off all applications, and disconnect all connections or cables to other equipment.
- Please dispose of waste electronic products properly in accordance with local laws and regulations, and do not dispose of electrical and electronic equipment, parts, batteries and other household waste.
warn
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>