traulux SMMI-LINE-VC-9 Catalogo TLM Standard Installation Guide

TV Floor Cart and Accessories
INSTALLATION MANUAL

SMMI-LINE-VC-9 Catalogo TLM Standard

Note: Now the columns are attached to the base without the use of any screws.
Be careful not to knock the columns over.
SMMI-LINE-VC

NOTE: Read the entire instruction manual before you start installation and assembly.
WARNING

• Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
• This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
• Always use an assistant or mechanical lifting equipment to safely lift and position  the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.

Assembling the Base

• Insert the right leg into the base. Align the holes in the right leg to the holes in the base. Secure with the screws. Repeat this step for the left leg.
• Each caster can be adjusted independently for fine tuning. Sightly turn the nutto lower or raise the base.

Attaching the Column to the Base

CAUTION: Please hold the A inner column when loosening the screws to adjust height. Repeat this step for the left column.
Note: Make sure both columns are at the same height using the height indicator as guide.

Note: Now the columns are attached to the base without the use of any screws.
Be careful not to knock the columns over. Attach the universal plate to the columns with the appropriate screws.
Tighten all screws using a Phillips screwdriver. Use the appropriate screws to il secure the columns to the base.
Tighten all screws using an Allen key.

Assembling the DVD Shelf

Attach the DVD shelf to the support bar with the appropriate screws and the knobs.

Installing the Adapter Brackets

4-1 For Flat Back Screens

4-2 For Recessed Back Screens or to Access A/V Inputs

Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.

• Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.
  Tighten all screws but do not over tighten.

Hanging the Display onto the Universal Plate

Hook the adapter brackets (attached the display) onto the universal plate.
Rotate the bottom screws counterclockwise to lock
Rotate the bottom screws clockwise to unlock.
Use the padlock to prevent display from being stolen. (Padlock is not included.)
IMPORTANT: Make sure the display is correctly mounted before releasing the display.

Cable Management

Installing the Camera Shelf

Attach the camera shelf to the connecting plate with the appropriate screws. Tighten all screws using a proper Phillips screwdriver.

Installing the Connecting Plate

Attach the connecting plate to the universal plate with the removed screws.
Tighten all screws using a proper Phillips screwdriver.

Adjustment

Maintenance

• Check that the bracket is secure and safe to use at regular intervals(at least every three months)
• Please contact your distributor if you have any questions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>