xtralite XL02728 omni Large Sensor Light Instruction Manual
- July 31, 2024
- xtralite
Table of Contents
xtralite XL02728 omni Large Sensor Light
Product Usage Instructions
EASY INSTALLATION
- Before first use, use the micro USB cable (included) to charge the product until the indicator light turns green.
- Remove the cover by rotating counterclockwise. Ensure the surface is clean from dust and grease (do not use household cleaners).
- Remove the liner and press the adhesive strips onto the back of the cover.
- Remove the remaining liner of the adhesive strips and then press and hold the base onto the surface for 30 seconds.
EASY REMOVAL
- To attach the light, align the notches and turn the light clockwise.
- Turn counterclockwise to release the light from the cover.
SCREW FIXING
- Mark the mounting holes in the cover and drive the screws into the mounting surface.
- To attach the light, align the notches and turn the light clockwise.
- IMPORTANT: Failure to follow instructions carefully may cause damage.
- CAUTION: Do not hang over beds or on wallpaper.
- When disposing of it, please locate a local recycling center.
FAQ
Q: Is this product safe for outdoor use?
A: No, this product is suitable for indoor use only.
Q: How many LEDs does this product have?
A: This product has 11 LEDs.
Q: Can I replace the rechargeable battery?
A: Yes, the battery type is a Rechargeable Li-ion 3.7V/1500 and can be replaced if needed.
Please read these instructions carefully before connecting or using the appliance. Keep it for future reference.
EASY INSTALLATION
- Before first use, use the micro USB cable (included) to charge the product until the indicator light turns green.
- Remove the cover by rotating counterclockwise. Ensure the surface is clean from dust and grease (do not use household cleaners).
- Remove the liner and press the adhesive strips onto the back of the cover.
- Remove the remaining liner of the adhesive strips and then press and hold the base onto the surface for 30 seconds.
- To attach the light, align the notches and turn the light clockwise.
EASY REMOVAL
- Turn counterclockwise to release the light from the cover.
SCREW FIXING
- Mark the mounting holes in the cover and drive the screws into the mounting surface.
- To attach the light, align the notches and turn the light clockwise.
- IMPORTANT: Failure to follow instructions carefully may cause damage.
- CAUTION: Do not hang over beds or on wallpaper.
- When disposing of it, please locate the local recycling center.
Specifications
- Dimensions: 180mm x 30mm
- Weight: 232g
- LED quantity: 11
- Lamp CCT: 4000K
- Lumens: 200
- Battery type: Rechargeable Li-ion 3.7V/1500mAH
- Power Switch: Auto On Switch (Motion Sensor)
- Indoor use only
Important Information
- When using electrical appliances, to reduce the risk of fire, electric shock, and/or injury to persons, basic safety precautions should always be followed.
For your safety.
- Read all instructions carefully, even if you are familiar with the appliance.
- Do not use this appliance if it appears to be damaged.
- Do not look directly into the light source or point it into the eyes of others.
- This can lead to retinal damage.
- This appliance is not watertight and is unsuitable for use in damp environments.
- This is not a toy. Close attention is necessary when used near children.
- Do not immerse the appliance in water or any other liquid.
- Do not allow children to play with the packaging materials.
- Unit 3a Eden Business Park Dunns Close
- Nuneaton Warwickshire CV11 4NE
- 02476 586 845 e
- info@xtra-lite.com
- xtralite is a trading name of Trinity Xtras Ltd a Company registered in England No 4325172
Limited Warranty
- One-Year Limited Warranty Made in China
- For further product information visit www.xtra-lite.com
Documents / Resources
|
xtralite XL02728 omni Large Sensor
Light
[pdf] Instruction Manual
XL20728, XL02728 omni Large Sensor Light, XL02728 omni Sensor Light, Large
Sensor Light, XL02728 Sensor Light, omni Sensor Light, Sensor Light, Sensor,
Light
---|---
References
Read User Manual Online (PDF format)
Loading......