WAVLINK WS-WN573HX3 Wireless AP, Repeater User Guide
- July 31, 2024
- WavLink
Table of Contents
WS-WN573HX3 Wireless AP, Repeater
Product Information
Specifications:
- Product: Wireless AP/Repeater
- Model: WS-WN573HX3
- Compliance: FCC Requirement
Product Usage Instructions:
Setup and Installation:
-
Place the Wireless AP/Repeater in a central location for
optimal coverage. -
Power on the device by connecting it to a power source.
-
Access the device’s settings through a web browser using the
provided IP address. -
Follow the on-screen instructions to configure the Wireless
AP/Repeater to your network.
Functionality:
The Wireless AP/Repeater extends the range of your existing
Wi-Fi network by creating a new access point or repeating the
signal from your current router.
Maintenance:
Regularly check for firmware updates on the manufacturer’s
website to ensure optimal performance.
Frequently Asked Questions (FAQ):
Q: How do I reset the device to factory settings?
A: Locate the reset button on the device, usually found on the
back. Press and hold the button for 10 seconds until the device
resets.
Q: Can I use the Wireless AP/Repeater with any router?
A: The compatibility of the device may vary. Refer to the user
manual or contact customer support for specific router
compatibility information.
Wireless AP/Repeater
WS-WN573HX3
FCC Requirement
changes or m odifications not expressly approved by the party responsible for
com pliance could void the user’ s authority to operate the equipm ent. This
device com plies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device m ay not cause harm ful
interference, and (2) this device m ust accept any interference received,
including interference that m ay cause undesired operation. Note: This equipm
ent has been tested and found to com ply with the lim its for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These lim its are
designed to provide reasonable protection against harm ful interference in a
residential installation. This equipm ent generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, m ay cause harm ful interference to radio com m unications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipm ent does cause harm ful interference
to radio or television reception, which can be determ ined by turning the
equipm ent off and on, the user is encouraged to try to correct the
interference by one or m ore of the following m easures: Reorient or
relocate the receiving antenna. Increase the separation between the equipm
ent and receiver. Connect the equipm ent into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer
or an experienced radio/ TV technician for help. This equipm ent com plies
with FCC radiation exposure lim its set forth for an uncontrolled environm
ent. This equipm ent should be installed and operated with a m inim um
distance of 20cm between the radiator & your body. This transm itter m ust not
be co-located or operating in conjunction with any other antenna or transm
itter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>