Whirlpool W11680103 Dishwasher User Guide
- July 31, 2024
- Whirlpool
Table of Contents
QUICK START GUIDE WHIRLPOOL® DISHWASHER
PRODUCT REGISTRATION& OWNER INFORMATION
YOUR QR CODE UNLOCKS… product registration and warranty information, installation instructions, how-to videos, and additional accessories to get the most out of your product. If you purchased a smart appliance, your QR code will provide instructions on how to download the app and connect. You can access the full Installation, User Maintenance and Operating Instructions, Warranty details, and more by visiting our website at www.whirlpool.com/owners or www.whirlpool.ca/owners. This may save you the cost of a service call. To receive a free printed copy of the information online, call us at 1-866-698-2538 (U.S.A.) /1-800-807-6777 (Canada) or write to us at:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Whirlpool Brand Home Appliances
Customer eXperience Center
200-6750 Century Ave.
Mississauga,Ontario L5N 0B7
Register to access warranty information and receive important notifications
related to your product. Scan the Photo Registration Card or QR code to
register your product.
WARNING: To reduce the risk of fire, electric shock, or injury to person,
read the Important Safety Instructions located in the Safety and Installation
Instructions provided before installing or operating this appliance.
OPERATING INSTRUCTIONS
WARNING
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the Installation, User Maintenance and Operating Instructions printed and online before installing or operating this appliance.
SANITATION CYCLES
Sanitized Cycles sanitizes dishes and glassware in accordance with NSF International NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Only sanitizing cycles have been designed to meet the requirements of the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. There is no intention, either directly or indirectly, that all cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy.
-
Prepare and Load the
Dishwasher (13 Place Setting
Recommended Loading Pattern) -
Add Detergent and Rinse Aid (as needed) to the Dishwasher.
-
Check that All Arms Spin Freely (Items in the rack can block the spray arms.)
-
Select the desired Cycle for your load.
-
Select Additional Options.
-
Start/Resume Cycle. Close the door within 4 seconds for top control models.
Additional Loading tips
NOTE: Not all cycles, options, and features are available on all models. Appearance may vary.
USER-MAINTENANCE INSTRUCTIONS
Filter Cleaning
Filters should be removed and cleaned every 1–3 months for best performance.
To remove filter, pull out lower rack, grasp Filter Cup and rotate it 1/4 turn
counterclockwise. Pull up to remove. Remove the Filter Plate. Rinse both under
cold water in sink. A soft brush can be used to remove stuck on food. Replace
filter plate. Ensure filter plate is correctly seated under tabs. To install
filter cup, push down through opening. Turn clockwise to seat. Filter cup will
click in to place when seated properly.
Do not operate dishwasher with loose or missing filters.
W11680103B
®/™ ©2024 Whirlpool. All rights reserved. Used under license in Canada.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>