genexis XG6846B Inteno 5 Port Gigabit Managed Switch Installation Guide
- July 20, 2024
- genexis
Table of Contents
genexis XG6846B Inteno 5 Port Gigabit Managed Switch
Specifications:
- Model: XG6846B
- LAN Ports : Yes
- WAN Port : Yes
- USB Port : Yes
- SFP Port : Yes
- CATV: Yes
- LEDs: Yes
Product Information
The XG6846B is a high-performance networking device designed for broadband connectivity. It features multiple LAN ports, a WAN port, USB port, SFP port, CATV support, and LED indicators for easy monitoring.
Product Usage Instructions
Installation:
- Ensure the product label is positioned on the back of the active device.
- Place the device close to a power socket and broadband outlet or computer.
Setting up the XG6846B:
- Connect the RJ45 network cable to the internet LAN port.
- Ensure the device is powered on.
Your XG6846B is now installed!
Troubleshooting:
If the Power (PWR) indicator LED is red, contact your service provider.
Resetting the Device:
- Locate the reset button using the ‘Button overview’ chapter.
- Press and release the reset button for more than 5 seconds using a small pin or paperclip to reset the device to factory settings.
FAQ
- Q: Where can I find different language versions of the user manual?
- A : Different language versions and additional product information are available on https://genexis.eu/product/xg-series/downloads
- Q: How can I check if my XG6846B is compliant with EU Directives?
- A: The EU Declaration of Conformity and related information can be found at https://genexis.eu/red/XG6846B
Button Overview
Reset button (recessed)
Reset – press 5 seconds and release
Port Overview
LED overview
Installation guide
Different language versions of this document and additional product information are available on https://genexis.eu/product/xg-series/downloads
Box contents
- XG6846B (active device)
- Power adapter
- RJ45 Network cable (2x)
- Label (self-adhesive)
- Plugs & screws (4X)
- Installation Guide (this document)
Label position
The product label is positioned on the back of the active device.
Preparation
Ensure there is a power socket within reach of where the device is being installed and that the product is close to your broadband outlet, alternatively, at your computer.
Setting up the XG
- Connect the RJ45 network cable to the internet LAN port.
- Ensure that your device is powered by the power adapter and plugged in an electrical socket.
- Switch the ON/OFF switch.
- The colored LED of the power/ status will start blinking. Please wait for 2 minutes for the this process to complete.
- Depending on the operator the device may need to update your user profile. This might take 10 minutes. Do not turn of the power meanwhile.
- If your personal device is connected properly with the LAN port, the power LED, WAN and LAN LEDs will have a fixed green color. In some cases 100Mb might be the correct speed.
Your XG6846B is now installed!
Troubleshooting
Is the Power (PWR) indicator LED off?
- Check if the device is properly connected to the power adapter.
- Check if the power adapter is connected to an electrical outlet.
- Check if the device is turned on – the ON/OFF switch should be in ‘ON’ state.
- If the device is properly connected and turned on, the Status indicator LED should turn green after a while.
Is the Power (PWR) indicator LED red? Contact your service provider.
Is the WAN indicator LED off?
- Check the connection of the RJ45 cable to the WAN port (depending on the WAN interface you are using).
- If the WAN indicator LED is off, please contact your service provider.
Reset the device
The reset button resets the device to factory settings. You can press this
button with a small pin or paper clip. See chapter ‘Button overview’ to locate
the pinhole.
Press and release the button for more than 5 seconds.
EU Declaration of Conformity
Hereby, Genexis B.V. declares that the product XG6846B is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, Delegated Directive 2015/863 and Ecodesign Directive 2009/125/EC.
The full text of the EU Declaration of Conformity is available at the following internet address: https://genexis.eu/red/XG6846B
Company Name
Genexis B.V.
Company Address
Lodewijkstraat 1a
5652 AC Eindhoven
The Netherlands
Name and title of authorized person
Maarten Egmond, CTO
Signature of the authorized person
Place of issue
Eindhoven
The Netherlands
Date of issue
2020-08-11
Revision 1.3 – February 2024 – Copyright © 2024 Genexis Netherlands B.V. All
rights reserved.
Genesis assumes no responsibility for any inaccuracies in this document.
Genexis reserves the right to change, modify, transfer, or otherwise revise
this publication without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>