tp-link UE300C Gigabit Ethernet Network Adapter Owner’s Manual
- June 10, 2024
- tp-link
Table of Contents
Gigabit Ethernet Network Adapter
Owner’s Manual
UE300C Gigabit Ethernet Network Adapter
ATTENTION
♦ When product has power button, the power button is one of the way to shut
off the product; when there is no power button, the only way to completely
shut off power is to disconnect the product or the power adapter from the
power source.
♦ Don’t disassemble the product, or make repairs yourself. You run the risk of
electric shock and voiding the limited warranty. If you need service, please
contact us.
♦ Keep the device away from water, fire, humidity or hot environments.
♦ This USB Adapter can be powered only by computers that provide ES1, and
comply with Limited Power Source(LPS) or PS2.
Recycling
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
To communicate with TP-Link users or engineers, please visit
https://community.tp-link.com to join TP-Link Community.
For technical support, replacement services, the user guide and more
information, please visit https://www.tp-link.com/support, or simply scan
the QR code.
If you have any suggestions or needs for our product guides, you are welcome
to email techwriter@tp-link.com.cn.
©2020 TP-Link 7106508740 REV4.0.0
This adapter supports Plug and Play feature. Plug in and wait for seconds.
Then this adapter is ready to use.
UE300C:
*For Windows 7/8/8.1, Mac OS X 10.8 and older version, please download and install a driver from our official website: www.tp-link.com, and search the model No.
UE300, UE330 and UE200:
- For Windows 7/8/8.1, please click to install a driver if prompted to do so. For Windows 7, please click CANCEL if prompted “The program might not have installed correctly” after installation. For Mac OS X 10.8 and older version, please download and install a driver from our official website: www.tp-link.com, and search the model No.
LED Indication
| LED (for UE330) | Status | Indication |
|---|---|---|
| White | On | The adapter is properly connected and hub is ready to use |
| Yellow | On | The Ethernet cable is properly connected |
| Green | Flashing | Network data is being transferred |
LED (for UE300C, UE300, UE200)
White| On| Both the adapter and Ethernet cable are properly connected
White| Flashing| Network data is being transferred
FCC STATEMENT
**** This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
CE Mark Warning
This is a class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-
link.com/en/ce
References
- 域名售卖
- WiFi Networking Equipment for Home & Business | TP-Link
- TP-Link Community
- CE Regulatory Compliance | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>