RgK GrandSlam, GrandSlam X, GrandSlam LX Wheelchair User Manual

July 30, 2024
RGK

GrandSlam, GrandSlam X, GrandSlam LX Wheelchair

“`html

Specifications:

  • Product Name: GrandSlam Range Wheelchair
  • Model Number: UM-GrandSlam-Range-022-EU
  • Manufacturer: RGK

Product Usage Instructions:

Set Up Guide:

WARNING: Do not operate the wheelchair without
reading and understanding the user manual. Seek professional help
if needed.

  1. Remove all parts from the packaging.

  2. Thoroughly read and understand the user manual.

  3. Attach wheels and other parts securely.

  4. Ensure all parts are functioning correctly and set up
    properly.

  5. Adjust upholstery for comfort and support.

  6. Adjust footplate height for proper support and balance.

  7. Carefully transfer into the wheelchair in a safe
    environment.

  8. Test the wheelchair thoroughly before engaging in sports
    activities.

Note: For any setup questions, contact your
local authorized dealer.

B4Me Special Adaptations:

Read and understand all user information provided with your B4Me
product before first use. Keep the information for future
reference.

Medical Device Combinations:

Follow instructions to avoid injury or damage. Report any
serious incidents to the manufacturer and competent authority.

Note: For information on possible combinations
with other medical devices, visit www.Sunrisemedical.co.uk.

FAQ:

Q: How do I adjust the footplate height?

A: To adjust the footplate height, locate the adjustment
mechanism on the wheelchair frame and follow the instructions
provided in the user manual.

Q: Can I use the wheelchair for sports activities?

A: Yes, ensure you have tested the wheelchair thoroughly and are
confident with its functions before engaging in sports
activities.

“`

User Manual

EN
GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

WHEELCHAIR DIRECTIONS FOR USE

GrandSlam Range User Manual |

Thank you for choosing an RGK product,

Welcome to the RGK family and we hope the product and service you have received has exceeded your expectations. Please take the time to read the instructions and familiarise yourself with your new wheelchair to ensure you benefit from the maximum safety, performance and longevity.
We want you to be fully satisfied with our products and services and we are constantly working to develop our products further. For this reason, changes can occur within our range of products with regard to form, technology and equipment. Consequently, no claims can be construed from the data or pictures contained in this user manual.
Set Up Guide:

! WARNING:
Do not operate this equipment without first reading and understanding this user manual. If you are unable to understand the warnings and instructions, contact RGK or a healthcare professional (doctor / therapist) before attempting to use this equipment – otherwise injury or equipment damage may result.

1. Carefully remove product and any loose parts from the box and ensure nothing is left in the packaging.
2. Read contents of this user manual thoroughly and understand the safety risks.
3. Attach the wheels and separate parts. 4. Check everything is as expected and that all parts are secured,
functioning and set up correctly, including tyre pressure. 5. Adjust the upholstery ensuring it provides the right levels of
support to suit your posture and comfort requirements. 6. Adjust the footplate height if required to ensure the correct
support for your feet and balance. 7. Once ready and in a safe environment, carefully transfer into
your new wheelchair and ensure it functions correctly. 8. Before using your wheelchair for sports activities, ensure you
have fully tested the wheelchair and are confident with the balance point and how the chair functions. 9. If you have questions on the set up of your wheelchair, please contact your local authorized dealer. Happy rolling!

NOTE:
B4Me special adaptations
RGK WHEELCHAIRS strongly recommends that in order to ensure that your B4Me product operates, and performs as intended by the manufacturer; all the user information supplied with your B4Me product is read and understood, before the product is first used. RGK WHEELCHAIRS also recommends that the user information is not discarded after reading it, but it is kept safely stored for future reference.

NOTE:

NOTE:
Medical Device Combinations

Medical Device Regulation (EU) 2017/745

It may be possible to combine this

General user advice.

Medical device with one or more

Not following these instructions may result in physical injury, damage to

other Medical Device or other

the product or damage to the environment!

product. Information on which

A notice to the user and/or patient: Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority of the Member State in which the user and/or patient is established.

combinations are possible can be found at www.Sunrisemedical.co.uk. All combinations listed have been validated to meet the General Safety and Performance Requirements,

Annex I Nr. 14.1 of the Medical Device

Regulation 2017/745.

The management system of SUNRISE MEDICAL is certified to EN ISO 13485. This product

complies with the standards set forth in EU and UK regulations.

As the manufacturer, SUNRISE MEDICAL, declares that this product conforms to the

Sunrise Medical GmbH Kahlbachring 2-4

Medical Device Regulation (2017/745).

69254 Malsch/Heidelberg

Deutschland

As the manufacturer, SUNRISE MEDICAL, declares that the product conforms to the

Tel.: +49 (0) 7253/980-0

UK Medical Devices Regulation 2002 No. 618.

Fax: +49 (0) 7253/980-222

www.SunriseMedical.de

2

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Contents

Contents

4

GrandSlam Manual Propelled Wheelchair

5

GrandSlam X Manual Propelled Wheelchair

6

GrandSlam CX Manual Propelled Wheelchair

7

Safety Summary

11 Service Inspection Checklist

12 Troubleshooting Guide Mechanical

13 Procedure 1 – Upholstery

14 Procedure 2 – Rear Wheels

15 Procedure 3 – Tyres and Inner Tubes

15 Procedure 4 – Camber Bar

16 Procedure 5 – Castor Wheels and Forks

16 Procedure 6 – Footrest

17 Procedure 7 – Sideguards

17 Procedure 8 – Adjustable Backrest

18 Technical Data – GrandSlam

19 Technical Data – GrandSlam X

20 Technical Data – GrandSlam CX

21 Technical Data – Recycling/Disposal

22 Identification / Serial Number

23 Manufacturers Warranty

Definitions
NOTE:
General advice or best practice
! CAUTION:
Advice to user that potential damage to equipment may occur if the advice is not followed.
! WARNING:
Advice to the user of a Potential Risk of injury if the advice is not followed.
! DANGER:
Advice to the user of a potential risk of serious injury or death if the advice is not followed.

NOTE:
NOTE: Please note that driving a wheelchair requires sufficient cognitive, physical and visual skills. The user must be able to assess the effects of actions during the operation of the wheelchair and, if necessary, to correct them. These capabilities and the safe use of the additionally attached components cannot be assessed by Sunrise Medical as a manufacturer. We cannot accept any liability for any damage resulting from this.
Please refer to the operating instructions of the wheelchair and the additionally mounted components. Instruct the user in the safe use of the wheelchair and the additionally mounted components. Inform users of specific warnings that need to be read, understood, and respected.

NOTE:
The wheelchairs shown and described in this user manual may not correspond in every detail exactly to your own model. However, all instructions are completely relevant, regardless of possible detail differences. The manufacturer reserves the right to alter without notice any weights, measurements or other technical data shown in this manual. All figures, measurements and capacities shown in this manual are approximate and do not constitute specifications

NOTE:
Please keep a note of your local authorised dealer’s contact details in the space provided. In the event of a breakdown, contact them and try and give relevant details so they can help you quickly.
ISO 7010-M002 Instruction manual/booklet must be read! (Blue Icon)

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

3

GrandSlam Range User Manual | GrandSlam Manual Propelled Wheelchair

GrandSlam Manual Propelled Wheelchair
Fig. 1.
A

K J

H

I

B G

F
E
D C

A – BACKREST B – REAR WHEELS C – CASTOR WHEELS D – CASTOR FORKS E – FOOTREST

F – FOOTPLATE COVER G – CAMBER AXLE H – FRAME I – UNDER SEAT BRACE BAR J – CUSHION & COVER K – SIDEGUARD

4

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | GrandSlam X Manual Propelled Wheelchair

GrandSlam X Manual Propelled Wheelchair

Fig. 2.
J

A K
I

B H
G

F E
D
C

A – BACKREST B – REAR WHEELS C – CASTOR WHEELS D – CASTOR FORKS E – FOOTREST

F – FOOTPLATE COVER G – CARBON AXLE H – HEAT TREATED FRAME I – UNDER SEAT BRACE BAR J – CUSHION & COVER K – SIDEGUARD

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

5

GrandSlam Range User Manual | GrandSlam CX Manual Propelled Wheelchair

GrandSlam CX Manual Propelled Wheelchair
Fig. 3.
A

J

I

B

H F E

G
D C

A – CX SEAT B – REAR WHEELS C – CASTOR WHEELS D – CASTOR FORKS E – FOOTREST

F – FOOTPLATE COVER G – CARBON AXLE H – HEAT TREATED FRAME I – UNDER SEAT BRACE BAR J – CUSHION & COVER

6

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Safety Summary

Safety Summary

Use
Sports wheelchairs are intended to be used for indoor and outdoor sports activities by children and adults who have limited mobility or are unable to run, walk or manoeuvre with agility. The wheelchair is for the customers own personal, recreational or professional use within indoor and outdoor sporting venues. The sports wheelchair is operated by the user pushing on the hand-rim and is intended to be used on level sporting surfaces and is not intended to be used to manoeuvre curbs or uneven bumpy surfaces.
The wheelchair may be used in contact sports and is intended to provide a level of reasonable safety to the player during any contact with other players. As contact in the sport is commonplace and accepted by athletes, the user may sustain injury as a result of the sport, for which the user is liable.
Warranty can only be considered if the product is used under the specified conditions and for the intended purposes. The intended lifetime of the wheelchair is 2 years. Please do not use or fit any third-party components to the wheelchair unless they are officially approved by RGK Wheelchairs.
Area of Application
The variety of fitting variants as well as the modular design mean that it can be used by those who cannot walk or have limited mobility e.g. due to:
– Paralysis – Loss of extremity (leg amputation) – Extremity defect deformity – Joint contractures / joint injuries – Illnesses such as heart and circulation deficiencies,
disturbance of equilibrium or cachexia as well as for elderly people who still have the strength in the upper body.

General safety
The engineering and construction of this wheelchair has been designed to provide maximum safety. International safety standards currently in force have been fulfilled where appropriate. Nevertheless, users may put themselves at risk by improperly using their wheelchairs. For your own safety, the following rules must be strictly observed.
Unprofessional or erroneous changes or adjustments increase the risk of accident. Be careful during your first use in your new wheelchair and get comfortable and confident before participating in sporting activities.
! WARNING:
Travelling downhill at higher speeds in your wheelchair can cause castor flutter. This can lead to instability and potentially result in personal injury.
Before each use, the following should be checked:
· Quick release axles on the rear wheels · Velcro on seats and backrests · Tyres and tyre pressure
Before changing any of the adjustments of the wheelchair, it is important to read the corresponding section of the user manual.

When considering provision, please also note the body size, weight, physical and psychology constitution, the age of the person, living conditions and environment.

Final Selection of the type of wheelchair to be used by an individual rests solely with the user and their health care professional capable of making such a selection.
! WARNING:
CHOKING HAZARD ­ This mobility aid uses small parts which under certain circumstances may present a choking hazard to young children.

! DANGER:
NEVER exceed the maximum load of 125kg for wheelchairs in the GrandSlam Range, including any items carried on the wheelchair. Please note the weight information for lighter weight options, which are quoted separately. If you exceed the maximum load, this can lead to damage to the chair, or you may fall or tip over, lose control and may lead to serious injury of the user and other people.

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

7

GrandSlam Range User Manual | Safety Summary

Safety Summary Continued

· If and whenever possible, during a journey in a specially fitted vehicle for disabled people, vehicle occupants should use the seats in the vehicle and the appropriate restraint system. This is the only way to ensure that occupants will have the maximum protection if there is an accident.
· To avoid falls and dangerous situations, you should first practice using your new wheelchair on level ground with good visibility.
· This wheelchair should be used exclusively to convey one person at a time. Any other use does not comply with the intended purpose.
· When getting on or off the wheelchair, do not use the footplates.
· Depending on the diameter and setting of the castors, as well as the centre of gravity setting of the wheelchair, the castors may begin to flutter at high speeds. This can lead to the castors being blocked and the wheelchair may tip over.
· Explore the effects of changing the centre of gravity on the behaviour of the wheelchair, for example on inclines, slopes, all gradients or when overcoming obstacles. Do this with the secure aid of a helper.

Stability and Balance
To assure stability and correct operation of your wheelchair, you must at all times maintain balance. Your wheelchair has been designed to remain upright and stable during normal daily activities as long as you do not move beyond the centre of gravity. All activities which involve movement in the chair have an effect on the centre of gravity.
Make sure the castors are pointing in the rearward position whenever you lean forward. This can be achieved by advancing the chair and then reversing it in a straight line. See Fig. 4.
Fig. 4.

Front of Chair

Back of Chair

Weight Training
RGK DOES NOT recommend the use of its wheelchairs as a weight training apparatus. This product has NOT been designed or tested as a seat for any kind of weight training. If occupant uses said wheelchair as a weight training apparatus, RGK shall NOT be liable for personal injury or equipment damage and the warranty will be voided immediately.

Castors Pointing Forward

! WARNING:
Any products left in extreme hot or cold climates could result in hot/cold surfaces which could result in personal injury.
Do not expose the product or any of its accessories to any form of excessive heat or naked flame, Including cigarettes.
This product has moving parts and therefore could trap the user’s fingers. Use extreme caution when moving.

! WARNING:
The position of the footrest, camber tube, height, as well as the tautness of the back upholstery are directly related to the chair’s stability. Any change to one or any combination of the three may cause the chair to decrease in stability. Use EXTREME caution when using a new seating position for the first time.
! WARNING:
Tyre pressure DO NOT use your wheelchair unless it has the proper tyre pressure (P.S.I).
DO NOT over inflate the tyres. Failure to follow these suggestions may cause the tyre to explode and cause bodily harm.

8

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Safety Summary

Safety Summary Continued

· Anti-tip tubes should prevent the chair tipping over backwards unintentionally. Under no circumstances should they take the place of transit wheels, and be used to transport a person in a wheelchair with the rear wheels removed.
· With extreme settings (e.g. rear wheels in the most forward position) and less than perfect posture, the wheelchair may tip over even on a level surface.
· Do not hang heavy items such as shopping bags or backpacks, on the push handles, head rest or backrest of the wheelchair. These can change the tipping point and there is a risk of tipping backwards.
· When reaching for objects which are in front of, to the side or behind the wheelchair, make sure that you do not lean too far out of the wheelchair. If you do it can change the centre of gravity there is a risk of tipping or rolling over.
· Only use your wheelchair properly. For example, avoid travelling against an obstacle without braking (step, kerb edge) or dropping down gaps.
· Only attempt stairs with the help of an attendant. There is equipment available to help you, e.g. climbing ramps or lifts, please use them. If there is no such equipment available, then the wheelchair must be tipped and pushed over the steps (2 helpers).

· Make sure that the attendant only holds the wheelchair using securely mounted parts (e.g. not on the footrests or the side guards).
· When it is dark, please wear light clothing or clothing with reflectors, so that you can be seen more easily. Make sure that the reflectors on the side and back of the wheelchair are clearly visible. We would also recommend that you fit an active light.
· Adjustments to your wheelchair, especially to securityrelevant components as for example anti-tip or backrest must be performed by authorized dealers.
· It is recommended to clean and disinfect the entire product, especially the upholstery, frequently.
· Do not tilt the wheelchair without assistance · Do not reuse single use fasteners · Always make use of elevators and ramps. If these are not
available, you should request the help of an attendant. They should only grip the wheelchair at securely mounted parts. A wheelchair should never be lifted with an occupant; it should only be pushed. · If the seat and back sling are damaged, you must replace them immediately. · Do not lift or carry the wheelchair by the back tubes. · Be careful with fire, in particular with burning cigarettes. Seat and back slings can be set alight.

Indications:
The varieties of fitting variants, as well as the modular design, mean that it can be used by those who cannot walk or have limited mobility because of: – Paralysis – Loss of extremity (leg amputation) – Extremity defect deformity – Joint contractures/joint injuries – Illnesses such as heart and circulation deficiencies, disturbance of equilibrium or cachexia, Neurological disease patterns, Muscle dystrophy, Hemiplegia as well as for elderly people who still have strength in the upper body.
GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

Contraindications:
The wheelchair is intended to be used independently and should not require the aid of an attendant for use in sport. The wheelchair shall not be using in the case of: · Upper body paralysis · Loss of both arms · Seating disability · Loss of sight / blindness
9

GrandSlam Range User Manual | Safety Summary

Safety Summary Continued

· Always make sure that the quick-release axles on the rear wheels are set properly and are locked in place. If the button on the quick-release axle is not pressed in, the rear wheel cannot be removed.
· In particular when using lightweight metal hand rims, fingers will easily become hot when braking from a high speed or on long inclines.
· If the wheelchair is subject to direct sunlight for a long period of time, then parts of the wheelchair (e.g. frame, leg rests, brakes and side guards) may become hot (>41°C).
· To avoid hand injuries do not grab in between the spokes or between the rear wheel and wheel lock when driving the wheelchair.
· Do not use the wheelchair on slopes > 5°. · The dynamic safe slope is dependent on the chair
configuration, the user’s abilities and the style of riding. As the user’s abilities and style of riding cannot be pre-determined then the max safe slope cannot be determined. Therefore, this must be determined by the user with the assistance of an attendant to prevent tipping. It is strongly recommended that inexperienced users have anti-tips fitted. · Do not use your wheelchair on muddy or icy ground. · Do not use your wheelchair where pedestrians are not allowed. · The wheelchair should be used with caution in heavy rain, snow, slippery, or unsound surfaces. · Do not use the wheelchair in hazardous environments.

CAUTION: !

Check wheelchair

before and after any contact sport activities.

10

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

Initially Inspect/ Adjust Weekly Inspect/ Adjust Monthly Inspect/ Adjust Yearly

GrandSlam Range User Manual | Safety Inspection Checklist
Safety Inspection Checklist
NOTE:
Regular cleaning will help to highlight any loose or worn parts and enhance the smooth operation of your wheelchair. To operate properly and safely, your wheelchair must be cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair. Initial adjustments should be made to suit your personal body structure and preference. If you want to store the wheelchair for a long period of time, then no further measures are required. Make sure that the wheelchair is stored at room temperature in a dry place which is protected from strong sunlight. Before using it again, the wheelchair should be checked by an authorised dealer. Thereafter, follow the maintenance procedures outlined below:

Item

General

· Wheelchair rolls straight (no excessive drag or pull to one side)

ü

· Inspect frame for cracks and damage

ü

· Inspect all fasteners are secured

ü

Seat and Back Upholstery

· Inspect for rips or sagging

ü

ü

· Inspect fastening flaps to ensure they securely latch

ü

ü

Rear Wheels

· Adjustable axle position camber bar is securely tightened

ü

ü

· Quick/quad release axles lock properly

ü

ü

· No excessive side movement or binding when lifted and spun

ü

ü

Handrims · Inspect for signs of rough edges or peeling

ü

ü

Spokes · Inspect for bent or broken spokes · All spokes uniformly tight

ü

ü

ü

ü

Front Castor

· Inspect wheel/fork assembly for proper tension by spinning castor;

castor should come to a gradual stop

ü

ü

· Loosen/tighten locknut if wheel wobbles noticeably or binds to a

stop

ü

ü

· Wheel bearings are clean and free of moisture

ü

ü

CAUTION: As with any vehicle, the wheels and tyres should be

checked periodically for cracks and wear, and should be replaced

when necessary

Tyres · Inspect for flat spots and wear · If pneumatic tyres check for proper inflation

ü

ü

ü

ü

CAUTION: As with any vehicle, the wheels and tyres should be

checked periodically for cracks and wear, and should be replaced

when necessary

Cleaning

ü

ü

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

11

GrandSlam Range User Manual | Troubleshooting Guide Mechanical
Troubleshooting Guide Mechanical

Chair veers right Chair veers left Slow turn or performance Castor flutters Squeaks and rattles Loose-ness in chair

Solutions

ü

ü

ü

ü

Check tyres for correct and equal pressure

ü

ü

ü

ü

Check for loose castor stem nuts Check all fixtures are secure and tight

ü

ü

Check spokes for tension

ü

ü

ü

Check that both castors contact the ground at the same time

! WARNING:
After adjusting, always make sure that parts are properly tightened BEFORE using the wheelchair. DO NOT over-tighten hardware attaching to the frame. This could cause damage to the wheelchair.

12

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Procedure 1

Procedure 1 – Upholstery

The upholstery is fully adjustable and can be easily adjusted to provide the correct balance and comfort in your new wheelchair.

Fig. 5.

Side Securing Straps

Backrest Wings

1.3: Changing Cushion Cover
Remove cushion from the wheelchair. Open the Velcro pocket at the rear of the cushion and remove or replace foam as required. (Fig. 7).

Backrest Tail

Fig. 7.

Seat Sling

Centre Pad

1.1: Adjusting Seat
Remove the cushion from the wheelchair. The seat is adjusted by increasing or decreasing the tension in the straps on the underside of the seat (Fig. 6). To remove, release all the straps and remove.
Fig. 6.

! WARNING:
The position of the footrest, camber tube and rear seat height, as well as the tautness of the back upholstery are directly related to the chair’s stability. Any change to one or any combination of the four may cause the chair to decrease in stability. Use EXTREME caution when using a new seating position for the first time.

1.2: Adjusting Backrest
Remove the cushion and centre pad from wheelchair (Fig. 5). The backrest is adjusted by increasing or decreasing the tension on the straps at the back of the backrest. To remove, release all the straps and remove.

! CAUTION:
Velcro used on upholstery may cause property damage if contacted closely.

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

13

GrandSlam Range User Manual | Procedure 2

Procedure 2 – Rear Wheels

The rear wheels are quick release and are designed to be removed and attached frequently. All rear wheels use quick release axle pins to secure the wheels to the frame, although these vary in length, they operate the same.

2.1: Removing/attaching rear wheels
Push the quick release button and pull the wheel outwards. To install, push and hold the button and insert the quick release axle pin into the axle until the pin clicks into position. Ensure both wheels are fully engaged prior to use.
Fig. 8.

2.2: Adjusting Quick release axle pin
Only adjust the quick release axle pin if the wheel does not engage or the wheels feels loose. To adjust the length, remove the axle pin from the wheel and by using two spanners (1 x 11mm and 1 x 19mm) as per Fig. 9, extend or shorten the pin as required. Check bearings of pin engage after adjusting axle pin otherwise the pin has been overtightened.
Fig. 9.

Bearings

! WARNING:
Changing the size of your rear wheels can seriously affect the performance and stability of the wheelchair.

A = Lengthen B = Shorten
! WARNING:
Any adjustments to your quick release pins ­ then YOU must ensure your wheels lock on both sides of your wheelchair. When attaching the rear wheels, always check that they are securely mounted. Pull on the rear wheels to make sure the detent pin / RGK cap of the quick release axle are fully released before operating the wheelchair.
You should NOT be able to pull the rear wheel off.

14

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range UPsroerceMdaunruea3l &| P4rocedure 3

Procedure 3 – Tyres and Inner Tubes

Tyres will wear just like a car tyre and the time will depend on the type of use. It is recommended that both tyres are changed once the tread fades. For pneumatic tyres, there is a risk that a puncture will occur and the inner tube will need to be replaced in order to keep the wheelchair operational.

3.1: Changing the tyre
Remove the wheel from the wheelchair and release air in the tube by pressing the small pin inside the valve, if a Presta valve, then unscrew both the head and the securing ring at base and press the top until air releases. Using 2 x tyre levers (supplied in the toolkit), unhook the tyre completely from the wheel rim. Remove inner tube and tyre from wheel rim.
To install the tyre, place one side of the new tyre on the wheel rim. Then insert the inner tube inside the tyre and align the valve with the wheel rim hole. Ensure there are no kinks or uneven tension in the inner tube before putting

the second side of the tyre back on the wheel rim using the tyre levers. Be careful not to pinch the inner tube. Once tyre and inner tube are on the wheel rim, replace securing ring (if applicable) then inflate tyre a little. Adjust inner tube and tyre so that they fit nicely on the wheel rim and inflate to the recommended tyre pressure.
3.2: Changing the inner tube
Repeat the method above but do not remove tyre completely, just remove inner tube. If problems continue, remove tyre and inner tube and ensure there are no sharp edges in the wheel rim which may be causing a puncture.

Procedure 4 – Camber Bar

The Camber Axle or Camber Tube control your wheel position and your centre of gravity. It is very important to have this set up for your requirements for performance and safety. Axle tube can be fixed or adjustable. Fixed means this cannot be adjusted and for a user who is experienced and knows their balance point. Adjustable position gives the user choice and is ideal for less experienced users.

4.1: Adjusting Axle Tube position
To adjust the axle position, remove wheels. Using a 5mm allen key for the toolkit, release the top screws on top of the axle clamp as shown in Fig, 10 (A). Once released but still intact, move the axle backward for more stability Fig, 10 (C) and move forward for more tip show in Fig, 10 (B). Tighten the top screws once position has been set, and carefully use the chair as it was the first time.
4.2: Replacing Axle tube
To replace the axle tube, remove wheels. Using a 5mm allen key from the toolkit, release the screws completely from the axle clamp as shown in Fig. 10 (A). Take note of the distance between the axle clamp and the axle tube for set up of the new axle tube. Slide new tube into the clamps and into the same position as the old axle tube. The notch in the axle insert must be at the top of the axle tube.
If the wheelchair feels slow after replacing the axle tube, rotate the axle tube a little forwards or backwards to correct the wheel alignment.

! WARNING:
The position of the footrest, backrest, camber bar, as well as the tautness of the back upholstery, are directly related to the chair’s stability. Any change to one or any combination of the three may cause the chair to decrease in stability. Use EXTREME caution when using a new seating position for the first time.

Fig. 10.

A

C B

A = Adjust Position B = Forward

C = Backward

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

15

GrandSlam Range UPsreorceMdaunruea5l |&P6rocedure 5

Procedure 5 – Castor Wheels and Forks

The castor wheels at the front of the wheelchair will wear just like care tyres and should be replaced when they visibly look worn or cracks appear.

5.1: Changing castor wheels Using 2 x 4mm allen keys from the toolkit, remove 1 of the 2 screws in the centre of the castor wheel, as shown in Fig 11. Remove the screw and slide out the castor axle with the other screw still attached, noting any spacers and their positions. Install the new castor wheel and slide the castor axle back through and secure with the final screw.
5.2: Removing the castor fork Remove cap at the top of the castor housing. Using the socket from the toolkit, release and remove the locking nut. This will release the castor fork, and take note of any spacers and their positions.
NOTE:
Castor Bearings must be fitted by an authorised dealer. Failure to do so will result in invalid warranty on the parts.

Fig. 11.
Castor Screw
! CAUTION:
DO NOT replace the front castor forks or castor wheels with a different size other than what was originally supplied on the chair. By changing to a different size castor fork or castor wheel will have an adverse effect on the running of the chair and the end users balance causing personal injury.

Procedure 6 – Footrest

The footrest may need adjusting when you first use the wheelchair, if circumstances change or if fasteners come loose. It is important to periodically check the height and adjust as required.

6.1: Adjust footrest height
Before adjustment, take note of the height you have or require and mark if necessary. Using a 4 or 5mm allen key from the toolkit, release the 2 screws in each footrest clamp Fig. 12 (A). Reposition the footrest in the correct height and tighten the screws securely.
Fig. 12.

6.2: Adjust the footrest angle
With an adjustable angle footrest, release the 2 x clamp screws in the centre of the footplate Fig. 12 (B) using a 4mm allen key and 10mm spanner from the toolkit. Reposition to the correct angle and tighten the screws securely.

A BA

16

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Procedure 7

Procedure 7 – Sideguards

Sideguards support the user and prevent clothes from getting dirty. Although these need little maintenance, replacement is shown below.

7.1: Screw in sideguards
Remove the rear wheels. Using a 4mm allen key from the toolkit, release the 3 screws in the sideguard. To install, secure all screws but do not tighten until all are in position. Take care not to cross thread the screws.

Fig. 13.

Procedure 8 – Adjustable Backrest

8.1: Adjusting backrest position
To adjust the backrest position, remove the rear wheels. Using a 4mm allen key from the toolkit, release the 3 screws in the sideguard Fig. 14 (A). Move the backrest forward for more stability and move backwards for more tip. When positioned correctly, refit the screws and tighten taking care not to cross thread. Carefully use chair as it was the first time, adjusting to the new postion.
8.2: Adjusting backrest height
To adjust the backrest height, Push in the pins located on the Backrest posts Fig. 14 (B) to release and move the posts till the pins release into the next adjustment hole. Carefully use chair as it was the first time, adjusting to the new postion.

Fig. 14.

Backrest Height
B A A

B
Backrest Position

! WARNING:
The position of the footrest, backrest, camber bar, as well as the tautness of the back upholstery, are directly related to the chair’s stability. Any change to one or any combination of the three may cause the chair to decrease in stability. Use EXTREME caution when using a new seating position for the first time.

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

17

GrandSlam Range User Manual | Technical Data – GrandSlam

Technical Data – GrandSlam

Description

Min

Max

Maximum user weight Overall length with leg rest (no wheels) Overall width (seat width) Folded height (only for chairs with folding backs) Total mass (with wheels) Mass of the heaviest part (Transport weight) Static stability downhill Static stability uphill Static stability sideways Seat plan angle Effective seat depth Seat surface height at front edge Backrest angle Backrest height Footrest to seat distance Leg to seat surface angle Armrest to seat distance Front location of armrest structure Handrim diameter Horizontal location of axle Minimum turning radius

N/A 400mm 250mm
N/A 9kg 5kg N/A N/A N/A 0° 300mm 360mm -10° of tilt 100mm 200mm 70° of angle N/A N/A 24″-in 25mm 270mm

125kg 1,000mm 550mm
N/A 16kg 12kg N/A N/A N/A 45° of tilt 500mm 630mm 10° of tilt 500mm 520mm 90° of angle N/A N/A 700c 300mm N/A

  • Weight excluding 3rd party items Dimensions are subject to manufacturing tolerances.

ITEM Camber Bar Footrest Adjustment Height All Other Items

TORQUE 15Nm 10Nm 15Nm

NOTE:
RGK Wheelchairs Ltd are bespoke and individually made to measure for you, therefore your wheelchair may fall below or over the mentioned sizes.

18

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Technical Data – GrandSlam X

Technical Data – GrandSlam X

Description

Min

Max

Maximum user weight Overall length with leg rest (no wheels) Overall width (seat width) Folded height (only for chairs with folding backs) Total mass (with wheels) Mass of the heaviest part (Transport weight) Static stability downhill Static stability uphill Static stability sideways Seat plan angle Effective seat depth Seat surface height at front edge Backrest angle Backrest height Footrest to seat distance Leg to seat surface angle Armrest to seat distance Front location of armrest structure Handrim diameter Horizontal location of axle Minimum turning radius

N/A 400mm 250mm
N/A 9kg 5kg N/A N/A N/A 0° 300mm 360mm -10° of tilt 100mm 200mm 70° of angle N/A N/A 24″-in 25mm 270mm

125kg 1,000mm 550mm
N/A 16kg 12kg N/A N/A N/A 45° of tilt 500mm 630mm 10° of tilt 500mm 520mm 90° of angle N/A N/A 700c 300mm N/A

ITEM Camber Bar Footrest Adjustment Height Carbon Axle All Other Items

TORQUE 10Nm 10Nm
10 – 12Nm 10Nm

  • Weight excluding 3rd party items Dimensions are subject to manufacturing tolerances.
    NOTE:
    RGK Wheelchairs Ltd are bespoke and individually made to measure for you, therefore your wheelchair may fall below or over the mentioned sizes.

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

19

GrandSlam Range User Manual | Technical Data – GrandSlam CX

Technical Data – GrandSlam CX

Description

Min

Max

Maximum user weight Overall length with leg rest (no wheels) Overall width (seat width) Folded height (only for chairs with folding backs) Total mass (with wheels) Mass of the heaviest part (Transport weight) Static stability downhill Static stability uphill Static stability sideways Seat plan angle Effective seat depth Seat surface height at front edge Backrest angle Backrest height Footrest to seat distance Leg to seat surface angle Armrest to seat distance Front location of armrest structure Handrim diameter Horizontal location of axle Minimum turning radius

N/A 400mm 270mm
N/A 9kg 5kg N/A N/A N/A 0° 300mm 360mm -10° of tilt 100mm 200mm 70° of angle N/A N/A 24″-in 25mm 270mm

125kg 1,000mm 390mm
N/A 16kg 12kg N/A N/A N/A 45° of tilt 500mm 630mm 10° of tilt 500mm 520mm 90° of angle N/A N/A 700c 300mm N/A

ITEM Camber Bar Footrest Adjustment Height Carbon Axle All Other Items

TORQUE 10Nm 10Nm
10 – 12Nm 10Nm

  • Weight excluding 3rd party items Dimensions are subject to manufacturing tolerances.
    NOTE:
    RGK Wheelchairs Ltd are bespoke and individually made to measure for you, therefore your wheelchair may fall below or over the mentioned sizes.

20

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Technical Data – Recycling/Disposal
Technical Data – Recycling/Disposal
Prior to the wheelchair being re-used, it must be carefully prepared. All surfaces which come into contact with the user must be cleaned down and treated with a disinfection spray. In the following section, there is a description of the materials used on our wheelchairs. Aluminium: Frame, Castor forks, Wheels, side guards, Armrest, Footrest, Hand Rims, Anti-Tippers, Frame, Footplate covers Steel: Frame, Fixing points, Quick release axle pins, Footrest, Anti-tippers, Frame Wheels, Fixings, Wheel Locks, Footplate covers Titanium: Frame, Castor Forks, Quick release axle, Fixings, Side guards Anti- Tippers, Frame, Footrest Plastic: Handles, Tube stoppers, Castors, Footplate covers, Arm pads Packing: Plastic bags made from polyethylene, cardboard Upholstery: Woven polyester Cotton Leather
Disposal or recycling should be carried out by a disposal company or at a public disposal point. You could also return your wheelchair to your dealer for disposal (There may be a charge imposed).
NOTE:
Hygiene measures when being re-used: Prior to the wheelchair being re-used, it must be carefully prepared. All surfaces which come into contact with the user must be treated with a disinfection spray. To do this, you must use a disinfectant as authorised/recommended in your country, for rapid alcohol- based disinfection for medical products and medical devices, which must be disinfected quickly. Please be aware of the manufacturer’s instructions for the disinfectant you are using. In general, a complete disinfection cannot be guaranteed on seams. We therefore recommend that you dispose of seat and back slings to avoid micro-bacterial contamination with active agents according to your local infection protection law.

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

21

GrandSlam Range User Manual | Identification / Serial Number

Identification / Serial Number
The serial number of your made to measure wheelchair is located on either the under seat cross brace bar (J Product Description) or camber bar (H Product Description) or inside the backrest upholstery (A).

Please provide the following information whenever you have to order replacement parts.

Serial Number: Name:

Dealer:

Fig. 15. A

C

F

H

GrandSlam Label

L BD E

G

IJ

Fig. 16.
GrandSlamX Label

EliteX Label

RGK Chair Label Information
A – Medical Device B – CE Mark C – Model D – Serial Number E – Manufacturing Date F – UDI Barcode G- Manufacturing Address H- UDI Human Readable Version I – Maximum User Weight J – Intended Use K – Importer’s Address L – UKCA Mark M – UK Responsible Person / Swiss Representative

Fig. 17.
GrandSlamCX Label
Identification stickers (Located on camber axle or under seat brace bar)
22

K M

Sunrise Medical Limited Thorns Road, Brierley Hill West Midlands, DY5 2LD UNITED KINGDOM
Sunrise Medical AG Erlenauweg 17 CH-3110 Münsingen Schweiz/Suisse/Svizzera

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

GrandSlam Range User Manual | Warranty
Manufacturers Warranty
THIS GUARANTEE DOES NOT AFFECT YOUR LEGAL RIGHTS IN ANY WAY. RGK Wheelchairs* provides a guarantee, as set out in the warranty conditions, for wheelchairs to its customers covering the following
Warranty conditions
Should a part or parts of the wheelchair require repair or replacement as a result of a manufacturing and/or material fault within 12 months or for frame and cross-braces within 2 years after delivery to the customer, then the affected part or parts will be repaired or replaced free of charge.
For original spare parts which have been fitted at the customer’s expense, these will have a 12 months guarantee, (following the fitting), in accordance with these warranty conditions.
1. To enforce the warranty, please contact the local reseller where the product was purchased with the exact details of the nature of the difficulty. Should you be using the wheelchair outside the area covered by the local reseller, repairs or replacement will be carried out by another agency as designated by the manufacturer the wheelchair must be repaired by a RGK Wheelchairs designated Customer Service agent, (dealer).
2. For parts, which have been repaired or exchanged within the scope of this warranty, we provide a warranty in accordance with these warranty conditions for the remaining warranty period for the wheelchair in accordance with point 1).
3. For original spare parts which have been fitted at the customer’s expense, these will have a 12 months guarantee, (following the fitting), in accordance with these warranty conditions.
4. Consumable parts such as pads, tyres, inner tubes and similar parts are excluded from the warranty, except in the case that premature wear of the part is the direct result of a manufacturing fault.
5. Claims from this warranty shall not arise, if a repair or replacement of a wheelchair or a part is required for the following reasons: · The product or part has not been maintained or serviced in accordance with the manufacturer’s recommendations as shown in the User Instructions and/or the Service Instructions. · Accessories have been used which are not specified as original accessories. · The wheelchair or part having been damaged by neglect, accident or improper use. · Changes/modifications have been made to the wheelchair or parts, which deviate from the manufacturer’s specifications. · Repairs have been carried out, before our Customer Service has been informed of the circumstances.
6. This guarantee is subject to the law of the country in which the product was purchased from RGK Wheelchairs.

  • Means the authorised RGK reseller from which the product was purchased.

GrandSlam Range User Manual UM-GrandSlam-Range-022-EU

23

Sunrise Medical S.r.l. Via Riva, 20 ­ Montale 29122 Piacenza Italia Tel.: +39 0523 573111 Fax: +39 0523 570060 www.SunriseMedical.it
Sunrise Medical AG Erlenauweg 17 CH-3110 Münsingen Schweiz/Suisse/Svizzera Fon +41 (0)31 958 3838 Fax +41 (0)31 958 3848 www.SunriseMedical.ch
Sunrise Medical AS Delitoppen 3 1540 Vestby Norge Telefon: +47 66 96 38 00 post@sunrisemedical.no www.SunriseMedical.no
Sunrise Medical AB Neongatan 5 431 53 Mölndal Sweden Tel.: +46 (0)31 748 37 00 post@sunrisemedical.se www.SunriseMedical.se
MEDICCO s.r.o. H ­ Park, Herspická 1013/11d, 625 00 Brno Czech Republic Tel.: (+420) 547 250 955 Fax: (+420) 547 250 956 www.medicco.cz info@medicco.cz Bezplatná linka 800 900 809
Sunrise Medical Aps Mårkærvej 5-9 2630 Taastrup Denmark +45 70 22 43 49 info@sunrisemedical.dk Sunrisemedical.dk
Sunrise Medical Pty. Ltd. 11 Daniel Street, Wetherill Park, NSW 2164, Australia Phone: 9678 6600, Orders Fax: 9678 6655, Admin Fax: 9831 2244. Australia www.sunrisemedical.com.au
Sunrise Medical North American Headquarters 2842 Business Park Avenue Fresno, CA, 93727, USA 800-333-4000 800-300-7502 www.SunriseMedical.com

RGK Wheelchairs LTD. Unit 8 A/B/C Ring Road Zone 2, Burntwood Industrial Estate, Burntwood, Staffordshire, WS7 3JQ,
UK
Call: +44(0)1543 670 077 Email: info@rgkwheelchairs.com

Sunrise Medical GmbH Kahlbachring 2-4 69254 Malsch/Heidelberg Deutschland Tel.: +49 (0) 7253/980-0 Fax: +49 (0) 7253/980-222 www.SunriseMedical.de
Sunrise Medical Thorns Road Brierley Hill West Midlands DY5 2LD England Phone: 0845 605 66 88 Fax: 0845 605 66 89 www.SunriseMedical.co.uk
Sunrise Medical S.L. Polígono Bakiola, 41 48498 Arrankudiaga ­ Vizcaya España Tel.: +34 (0) 902142434 Fax: +34 (0) 946481575 www.SunriseMedical.es
Sunrise Medical Poland Sp. z o.o. ul. Elektronowa 6, 94-103 Lód Polska Telefon: + 48 42 275 83 38 Fax: + 48 42 209 35 23 E-mail: pl@sunrisemedical.de www.Sunrise-Medical.pl
Sunrise Medical HCM B.V. Vossenbeemd 104 5705 CL Helmond The Netherlands T: +31 (0)492 593 888 E: customerservice@sunrisemedi-cal.nl www.SunriseMedical.nl www.SunriseMedical.eu (International)
Sunrise Medical SAS ZAC de la Vrillonnerie 17 Rue Michaël Faraday 37170 Chambray-Lès-Tours Tel : +33 (0) 2 47 55 44 00 Email: info@sunrisemedical.fr www.sunrisemedical.fr
Sunrise Medical Canada Inc. 237 Romina Drive, Unit 3 Concord , Ontario L4K 4V3 Canada Phone: 1-800-263-3390 Fax: 1-800-561-5834 www.SunriseMedical.ca

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals