logitech Ultra Portable Keyboard User Guide
- June 7, 2024
- Logitech
Table of Contents
Keys-To-Go
Ultra-portable keyboard
Setup Guide
Keys-To-Go – Ultra-portable keyboard
Know your product
- Hot keys
- Keyboard
- Bluetooth® connect key
- Battery check key
- Bluetooth and battery status light
- On/off switch
- Micro-USB charging port
- Micro-USB charging cable
- Documentation
3
Set up your product
1. Turn on the keyboard:
Bluetooth discovery starts automatically and continues for 15 minutes. The
status light blinks blue.
If the status light briefly turns red, charge the battery. For more
information, see “Charge the battery.”
2. Establish Bluetooth connection:
On your iPad, make sure Bluetooth is on. Select Settings > Bluetooth > On.
Select “Keys-To-Go” from the Devices menu.
Tip: If “Keys-To-Go” isn’t in the list, try pressing and holding the Bluetooth connect key on your keyboard for 2 seconds.
4
Charge the battery
You should charge the battery when:
- the status light turns red briefly when you turn on the keyboard, or
- the status light blinks red when you press the battery check key:
A fully charged battery provides about 3 months of power when the keyboard is used about two hours a day.
Charging your battery
1. Use the micro-USB charging cable provided to connect the keyboard to your computer or a USB power adaptor. The status light blinks green while the keyboard is charging.
2. Charge your keyboard until the status light turns solid green.
Each minute of charging gives you about two hours’ use.
Note: This ratio is approximate and is based on the standard user
experience. Your result may vary.
It takes 2.5 hours to fully charge the battery.
5
Hot keys
Home = iPad Home screen
Switch applications
Search
Type keywords in the search bar for contacts, music, notes, events, mail, web,
Wikipedia, and more
Switch language
Switches the keyboard language
Virtual keyboard
Shows/hides the virtual keyboard
Screen Shot
Previous track
Play/Pause
Next track
Mute
Volume down
Volume up
Bluetooth connect
Battery check
Function keys
Fn + X = Cut
Fn + C = Copy
Fn + V = Paste
Fn + Left cursor = Select left
Selects text on the left, word by word
Fn + Right cursor = Select right
Selects text on the right, word by word
Note:
• To select a function key, press and hold the Fn key, and then press the
key indicated above.
6
Use your product
Status light indications
| Light | Description |
|---|---|
| Blinking green | The battery is charging. |
| Solid green | When charging, indicates that the battery is fully charged |
(100%).
When you press the battery check key, solid green for 2 seconds indicates that the battery power is good (above 20%).
Blinking red| Battery power is low (less than 20%). Recharge the battery.
Solid red| When you first turn on your keyboard, the status light shows solid
red briefly if battery power is low.
Blinking blue| Fast: The keyboard is in discovery mode, ready for pairing.
Slow: The keyboard is trying to reconnect to your iPad.
Solid blue| Bluetooth pairing or reconnection is successful.
Connecting to a different iOS device
- Make sure the keyboard is turned on.
- On your iOS device, check that Bluetooth is turned on. Select Settings > Bluetooth > On.
- Press and hold the Bluetooth connect key on the keyboard for 2 seconds. The keyboard turns discoverable for 3 minutes.
- Select “Keys-To-Go” from the Devices menu.
7
When you’ve finished using your product
When not in use, turn off the keyboard to conserve battery power.
Note:
• The keyboard enters sleep mode if powered on and not used for 2 hours. To
exit sleep mode, press any key.
8
Battery disposal at product end of life
1. Cut along the fabric at the top edge of the keyboard:
2. Use a screwdriver to pry the fabric away from the area around the on/off switch:
3. Separate the inner and outer fabric layers, and pull them away from the corner:
4. Pull back the yellow plate to reveal the battery and remove it:
5. Dispose of the battery according to local laws.
9
Visit Product Support
There’s more information and support online for your product. Take a moment to
visit Product Support to learn more about your new Bluetooth keyboard.
Browse online articles for setup help, usage tips, and information about
additional features. If your Bluetooth keyboard has optional software, learn
about its benefits and how it can help you customize your product.
Connect with other users in our Community Forums to get advice, ask questions,
and share solutions.
At Product Support, you’ll find a wide selection of content including:
- Tutorials
- Troubleshooting
- Support community
- Online documentation
- Warranty information
- Spare parts (when available)
Go to:
www.logitech.com/support/keystogo-ipad
Troubleshooting
The keyboard does not work
- Press any key to wake the keyboard from sleep mode.
- Turn the keyboard Off and then back On.
- Recharge the internal battery. For more information, see “Charge the battery.”
- Re-establish the Bluetooth connection between the keyboard and your iPad:
• On your iPad, check that Bluetooth is turned on.
• Press and hold the Bluetooth connect key on your keyboard for 2 seconds.
• Choose “Keys-To-Go” from the Devices menu on your iPad.
The status light briefly turns blue after the Bluetooth connection is made.
What do you think?
Thank you for purchasing our product.
Please take a minute to tell us what you think of it.
www.logitech.com/ithink
10
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>