eVolo EVC7001 Electric Vehicle Charge Point Owner’s Manual

: July 30, 2024
: eVolo

Table of Contents

eVolo EVC7001 Electric Vehicle Charge Point
FAQ
Features
Compliance
Technical Specification
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eVolo EVC7001 Electric Vehicle Charge Point

Specifications

Charging Type: Type 2 connector Cable lock via APP Multi-color LED indicators Scheduled charging via APP
Voltage: Electrical Earthing Arrangements Load Management
Cable Size: Built-in
RCD: Built-in
PEN fault detection : Built-in
Metering: Built-in
Surge protection: Isolation
Physical Size (w x h x d): 202 x 202 x 115mm approx.
Weight: 2.5kg approx.
Cover colour : Anthracite Grey
Ingress protection: IP54
Impact protection : IK10
Flammability rating: IEC 60695-1-10 UL94 5VB or V0
UV resistant Ambient Operating temperature

FAQ

Q: Can this EV charger be used for commercial properties?
A: No, this EV charger is specifically designed for use at domestic properties.
Q : How do I reset the charger in case of a malfunction?
A: Refer to the user manual for specific instructions on resetting the charger. Typically, there is a reset button or procedure outlined for such situations.

Features

Charge point control, scheduling, and energy usage monitoring via APP
Commissioned using a mobile device that is Bluetooth enabled and a mobile data connection, e.g. 4G.
LED indicators
PEN fault detection and isolation
Connected product (as required by the Smart Charge Point Regs.) via ethernet or Wi-Fi connectivity
RS485 connectivity for load management
Charge APP needs to be downloaded to register the product so that the end user can restrict use and authorize access
Easy to install: the mounting base plate has mains wiring terminals and has rear, top, and bottom drill-out cable entry points; the charge point attaches to the base
Suitable for wall or post mounting
7.4kW charging power (max. 32A)
Firmware updates OTA, once the product is registered
RFID-ready – the feature can be enabled via eVolo website
2 years extendable to 3 years upon registration at eVolo.UK

Compliance

IEC 61851-1:2019 EVSE mode 3
IEC 62955
EMC Regulations 2016
ROHS Regulations 2012
RED 2014/53/EU
UK Electric Vehicles (Smart Charge Points) Regulations 2021
Installation to be in accordance with BS7671

Communications

Wi-Fi 2.4GHz network
Ethernet RJ45
Bluetooth for commissioning via APP
Remote management via cloud
OCPP 1.6J

Description
The eVolo electric vehicle charge points provide AC Mode 3 charging to vehicles and operate via a smart phone APP. For use at domestic properties.

Range

7.4kW Mode 3 EV Charger (eDock) EVC7001

Technical Specification

Charging

Type 2 connector ✓
Cable lock via APP ✓
Multi-colour LED indicators ✓
Scheduled charging ✓ via APP

Electrical

Voltage 220V – 240V AC 50Hz single phase
Earthing Arrangements TN-C-S or TT
Load Management Maximum charging current
can be set via the APP
Cable Size 10mm2 max.
Built-in RCD 30mA (AC), 6mA (DC)
Built-in PEN fault detection ✓
Built-in metering ±2%
Surge protection: level III lightning protection, 4000 V (recommended to fit Type 2 SPD in the consumer unit)
Isolation Class II

Physical