eVolo EVC7007 Electric Vehicle Charge Point Owner’s Manual
- July 31, 2024
- eVolo
Table of Contents
Electric Vehicle Charge Point
EV Charger Mode 3
Description
The eVolo electric vehicle charge points provide AC Mode 3 charging to vehicles and operates via a smart phone APP. For use at domestic properties.
Features
- Charge point control, scheduling and energy usage monitoring via APP
- Commissioned using a mobile device which is Bluetooth enabled and a mobile data connection, e.g. 4G.
- LED indicators
- PEN fault detection and isolation
- Connected product (as required by the Smart Charge Point Regs.) via ethernet or Wi-Fi connectivity
- RS485 connectivity for load management
- Charge APP needs to be downloaded to register the product so that end user can restrict use and authorize access
- Easy to install: the mounting base plate has mains wiring terminals and has rear, top and bottom drill out cable entry points; the charge point attaches to the base
- Suitable for wall or post mounting
- 7.4kW charging power (max. 32A)
- Firmware updates OTA, once the product is registered
- eVoom is supplied with two RFID cards for non-smart control
- 3-Years extendable (the charge point needs to be registered to extend the warranty)
Compliance
- IEC 61851-1:2019 EVSE mode 3
- IEC 62955
- EMC Regulations 2016
- ROHS Regulations 2012
- RED 2014/53/EU
- UK Electric Vehicles (Smart Charge Points) Regulations 2021
- Installation to be in accordance with BS7671
Communications
- Wi-Fi 2.4GHz network
- Ethernet RJ45
- Bluetooth for commissioning via APP
- Remote management via cloud
- OCPP 1.6J
Range
7.4kW Mode 3 EV Charger (eVoom) EVC7007
Technical Specification
Charging
| Type 2 connector | ✓ |
|---|---|
| Cable lock via APP | ✓ |
| RFID authorisation | ✓ |
| Multi-colour LED indicators | ✓ |
| Scheduled charging | ✓ via APP |
Electrical
| Voltage | 220V – 240V AC 50Hz single phase |
|---|---|
| Earthing Arrangements | TN-C-S or TT |
| Load Management | Maximum charging current can be set via the APP |
| Cable Size | 10mm 2 max. |
| Built-in RCD | 30mA (AC), 6mA (DC) |
| Built-in PEN fault detection | ✓ |
| Built-in metering | –2% |
| Surge protection: | level III lightning protection, 4000 V (recommended to fit |
Type 2 SPD in the consumer unit)
Isolation| Class II
Physical| 202 x 202 x 115mm approx.
Size (w x h x d)| 2.5kg approx.
Weight| Black
Facia colour| IP54
Ingress protection| IK10
Impact protection| IEC 60695-1-10 UL94 5VB
Flammability rating| or V0
UV resistant| ✓
Ambient Operating temperature| -30°C to +50°C
DS 0482 V1.0 NPD 0604 A29 02/2023
Data Sheet subject to change without prior notice E&OE
Deta Electrical Company Ltd.
UK: Panattoni Park Luton Road Chalton Bedfordshire LU4 9TT UK
EU: Unit 16 Ashbourne Industrial Estate Ashbourne Co. Meath A84 W972 Ireland
Tel. +44 1582 544 548
technical@deta.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>