iMozen group TC605 Rugged Mobile Computer User Guide

iMozen group TC605 Rugged Mobile Computer

Specifications

• Model: TC605

• Manufacturer: iMozen Group INC.

• Address: 288 6 6F., No.288, Sec. 6, Civic Blvd., Xinyi Dist.,
  Taipei City, Taiwan

• Website: https://www.imozengroup.com/

Product Usage Instructions

General Safety Rules
Please read this guide carefully before using the device. Use only the components and accessories supplied by the manufacturer. Do not attempt to disassemble the device as it does not contain user-repairable parts. Tampering will void the warranty. Dispose of replaced battery packs according to local laws. Properly dispose of the device at the end of its product life. Avoid submerging the device in liquid.

Package Contents

• TC605 Rugged Mobile Computer
• Battery Pack (with Rechargeable Battery)
• Quick Start Guide
• USB Charge/Communication Cable (optional)
• Quick Charge Compliant Power Adapter (optional)

Important Notices and Precautions:

• Avoid high-temperature storage that may cause overheating.
• Stop charging when the indicator light turns green.
• Avoid charging in wet conditions.
• Avoid dropping or placing heavy objects on the device.
• Avoid contact with liquids or open fire.
• Stop using if there is a smell of overheating or unusual operation.
• Avoid using outdoors and keep the AC adapter away from objects that block heat dissipation
• Remove the AC adapter plug from the wall socket when not charging to prevent fire hazards.

FAQ

• Q: Can I use any other brand’s components with TC605?
  A: No, it is recommended to only use components and accessories supplied by the manufacturer to ensure proper functionality and warranty coverage.

• Q: What should I do if I notice liquid on the device?
  A: Immediately stop using the device and dry it off to prevent short circuits or damage.

Quick Start Guide

General Safety Rules

• Please read this Guide carefully before you start using this device.
• Use only the TC605 components and accessories supplied by the manufacturer.
• Do not attempt to disassemble the TC605, as it does not contain parts that can be repaired by the user. Any tampering will void the warranty.
• Discard replaced battery packs properly according to local laws.
• At the end of this device’s product life, dispose of properly according to local laws.
• Do not submerge the TC605 in any type of liquid.

Package Contents

• TC605 Rugged Mobile Computer
• Battery Pack (with Rechargeable Battery)
• USB Charge/Communication Cable (optional)
• Quick Charge Compliant Power Adapter (optional)
• Quick Start Guide

After unpacking, please inspect package contents. If any item is damaged or missing, please contact your customer support representative immediately.

Important Notices and Precautions

The manufacturer has made safety the first priority during the design stage. To avoid potential mishaps, please observe the following notices and precautions:

• Do not stock this device under high temperature conditions that may cause the battery to overheat.
• Do not charge longer than required. When the charging light is green, stop charging immediately.
• Charge this device in place without any water-spray or moisture.
• Use a dry cloth to wipe any dust off of the AC adapter plug to avoid potential fire.
• Do not drop this device on hard surfaces.
• Do not place heavy objects on this device to avoid cracking the enclosure.
• Do not unplug the AC adapter with wet hands to avoid electric shock.
• Do not use the AC adapter of the TC605 with any other devices.
• Do not place the device in liquids to prevent short-circuits or fire.
• Do not place this device near an open fire.
• If the power or USB cable is seriously twisted or broken, stop using immediately to prevent electric shock, short-circuit, or fire.
• Stop using immediately if there is any unusual smell or overheating during charging or operation.
• Stop using immediately when there is liquid or dew on the device.
• Do not use the AC adapter outdoors.
• Please do not wrap the AC adapter with cloth or other objects that could block heat dissipation and cause electric shock or fire.
• When not charging, remove the AC adapter plug from the wall AC outlet socket to avoid a fire hazard.
• The manufacturer will not be responsible for warranty claims if damage is caused due to improper personal use.

Laser Safety

Laser Light – Do not stare into this Beam Class 2 Laser Product. The maximum output radiation is 1 mW compliant with EN 60825-1 (2014)

Audio Safety

To prevent possible hearing damage, do not listen at high volume levels for long periods of time.

Features

Front View

1. Receiver
2. Power Button
3. Volume Button
4. Function Button
5. Scan Button
6. Touch Screen
7. Microphone
8. Speaker
9. Scan Window
10. Front Camera
11. Proximity/Light Sensor
12. Charging/Scan LED

Back View

1. Laser Warning Label
2. Back Camera
3. Flash LED
4. Accessory Expansion Port
5. Battery Cover Lock Switches
6. Battery Pins
7. SIM/Micro SD Card Slot
8. Battery / Cover Latches
9. Battery Cover
10. Battery Pack
11. Battery Slot
12. Cradle IO Connecter/ USB Connecter

Installing the Battery Pack

1. Push the Battery Lock Switch to Open and remove the Battery Cover.
2. Align the Battery Pack and the device connectors and slide it into the Battery Slot.
3. Slide the Battery Cover into the place and switch to Battery Lock mode to fix the battery.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES PROPERLY ACCORDING TO LOCAL LAWS.

Charging Instructions
The TC605 battery pack is not initially fully charged, please fully charge the device before using it for the first time. After installing the battery pack, please charge it via the USB cable or the charging cradle. Replace the battery pack annually to ensure maximum performance. Avoid storing batteries for long periods of time in fully charged or very low battery level status. To maintain a moderate charge and maximize battery life, charge spare battery packs every two to three months.

SD / SIM Card Installation

1. Turn off the TC605 or enable “battery replacement mode”.
2. Push the battery cover lock to the ” Unlock “ position, open the battery cover, and take out the battery pack.
3. Find the Nano SIM/Micro SD card tray above the battery slot and pull it out gently.
4. Insert the SIM card or Micro SD card into the correct slot and slide the tray back into place.
5. Replace the battery pack and battery cover. And then push the battery cover lock to the ” Lock “ position.

Scanning a Barcode Label

1. Point the scan window at the barcode you wish to scan.
2. Tap Scan on the Scan app screen or press a scan button on the TC605.
3. Center the laser red dot and crosshair aiming pattern on the barcode. Release the scan button to capture and decode the image.

Important Notices When Using

• Due to failure, shortened life, or unusual behavior, please confirm that the device has been used correctly, with no user operation issues involved.
• The manufacturer is not responsible for possible missing data or interference encountered during wireless transmissions.
• Do not use alcohol, benzene, organic solvents, cleaning liquid, or steel wool on the surface of this device.
• Do not scratch or mar the surface of the Scan Window in any way to avoid barcode scanning problems.

Bluetooth
This device was designed according to Bluetooth standard specifications, but compatibility issues may occur with other Bluetooth devices. The following environmental factors will affect the range of Bluetooth signals:

1. Walls, metal, human bodies, or other obstacles between the Bluetooth device and the connected device.
2. When devices using 2.4 GHz frequency signals (wireless LAN, wireless phones, microwave ovens, etc.) are placed near the device being used.
   When using Bluetooth devices other than mobile phones (TVs, laptops, etc.), the sound quality may be affected by the device specifications and performance.

Signal Interference from TV or Radio
Sometimes transmitting or receiving data may fail due to signal interference from nearby TV or radio devices.

Certificate information
SAR Information (European Union and UK)

Head: 1.431 W/kg@ 10g
Body: 1.292 W/kg@ 10g
Limbs: 2.754 W/kg@ 10g

European Union Regulatory Notes

1. Requirements for AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV /LI/LT/LU/HU /MT/ NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK(NI)/HR. 5150MHz~5350MHz is for indoor use only.
2. iMozen Group Inc declares that the radio equipment type for the TC605 is in compliance with Directive 2014/53/EU and Directive 2011/65/EU.

United Kingdom Regulatory Notes

1. Requirements for UK: 5250~5350MHz / 5945 to 6425 MHz (for LPl) is for indoor use only.
2. iMozen Group Inc declares that the radio equipment type for the TC605 is in compliance with Directive SI 2017 No.1206.
   The full text of the EU and UK declaration of conformity is available at the following internet address: www.imozengroup.com/support- category/download/

FCC Caution

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC rules.
• The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for interned operation as described in this manual. Further RF exposure reduction can be achieved if the product is kept as for as possible from the user’s body or if the device is set to a lower output power if such function is available.

Power and Frequency Ranges

WLAN

| 2.4GHz| 2400~2483.5 MHz| 20dBm

5GHz

| 5150~5250 MHz| 23dBm
5250~5350 MHz| 20dBm
5470~5725 MHz| 20dBm
5725~5850 MHz| 14dBm
6GHz| 5945-6425 MHz| 14dBm (VLP)

23dBm (LPI)

GSM

(only TC605AN)

| GSM 850| 824~849 MHz| 33dBm
GSM 900| 880~915 MHz| 33dBm
GSM 1800| 1710~1785 MHz| 30dBm
GSM 1900| 1850~1910 MHz| 30dBm

WCDMA

(only TC605AN)

| WCDMA Band 1| 1920~1980 MHz| 24dBm
WCDMA Band 2| 1850~1910 MHz| 24dBm
WCDMA Band 4| 1710~1755 MHz| 24dBm
WCDMA Band 5| 824~849 MHz| 24dBm
WCDMA Band 6| 830~840 MHz| 24dBm
WCDMA Band 8| 880~915 MHz| 24dBm
WCDMA Band 19| 830~845 MHz| 24dBm

LTE

(only TC605AN)

| LTE Band 1| 1920~1980 MHz| 23dBm
LTE Band 2| 1850~1910 MHz| 23dBm
LTE Band 3| 1710~1785 MHz| 23dBm
LTE Band 4| 1710~1755 MHz| 23dBm
LTE Band 5| 824~849 MHz| 23dBm
LTE Band 7| 2500~2570 MHz| 23dBm
LTE Band 8| 880~915 MHz| 23dBm
LTE Band 12| 699~716 MHz| 23dBm
LTE Band 17| 704~716 MHz| 23dBm
LTE Band 18| 815~830 MHz| 23dBm
LTE Band 19| 830~845 MHz| 23dBm
LTE Band 20| 832~862 MHz| 23dBm
LTE Band 25| 1850~1915 MHz| 23dBm
LTE Band 26| 814~849 MHz| 23dBm
LTE Band 28| 703~748 MHz| 23dBm
LTE Band 38| 2570~2620 MHz| 23dBm
LTE Band 39| 1880~1920 MHz| 23dBm
LTE Band 40| 2300~2400 MHz| 23dBm
LTE Band 41| 2496~2690 MHz| 23dBm
LTE Band 42| 3400~3600 MHz| 23dBm
LTE Band 43| 3600~3800 MHz| 23dBm
LTE Band 48| 3550~3700 MHz| 23dBm
LTE Band 66| 1710~1780 MHz| 23dBm

5G NR

(only TC605AN)

| n1| 1920~1980 MHz| 23dBm
n2| 1850~1910 MHz| 23dBm
n3| 1710~1785 MHz| 23dBm
n5| 824~894 MHz| 23dBm
n7| 2500~2570 MHz| 23dBm
n8| 880~915 MHz| 23dBm
n12| 699~716 MHz| 23dBm
n20| 832~862 MHz| 23dBm
n25| 1850~1915 MHz| 23dBm
n28| 703~748 MHz| 23dBm
n38| 2570~2620 MHz| 23dBm
n40| 2300~2400 MHz| 23dBm
n41| 2496~2690 MHz| 26dBm
n48| 3550~3700MHz| 23dBm
n66| 1710~1780MHz| 23dBm
n77| 3300~4200MHz| 26dBm
n78| 3300~3800MHz| 26dBm
n79| 4400~5000MHz| 26dBm
Other| NFC| 13.56 MHz| -16.03 dBuA/m
Other

(only TC605AN)

| GNSS| L1 1575.42 MHz L5 1176.45MHz| Rx only

The frequency band is mainly in accordance with local laws and regulations and cooperation with telecommunications operators.

Partners
https://www.imozengroup.com/imozen-partners/

References

• iMozen Group

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>