PHILIPS UD5001R High-Performance Road-Legal LED Auxiliary Driving Lights User Manual

PHILIPS UD5001R High-Performance Road-Legal LED Auxiliary Driving Lights

User Manual

PHILIPS UD5001R High-Performance Road-Legal LED Auxiliary Driving Lights

The Philips LED Lightbar bears the official Philips Automotive Grade Quality seal. Philips Automotive Grade
Quality products are designed and developed following strict quality-control processes (including applicable ISO norms), leading to consistently high production standards.

Important

Please read this user guide carefully before using your LED Lightbar. This guide contains important health and safety information.
If you need further assistance, please visit our website: www.philips.com/support Or visit your local Philips Dealer For more information visit https://www. philips.com / LED-dri ving-lights.

WARNINGS

1. Philips Ultinon Drive series are type-approved according to UN ECE R149 regulation and may therefore be installed and operated on public roads. Please note: It is your own responsibility to ensure that the installation and use of the LED lightbars complies with applicable local and country-specific legal requirements. This includes, but is not limited to: Only install in pairs. The total of all referenc.e numbers of the high beam headlights moonted on thevehide may not exceed 100. Boostful”ICl:ion is oot permitted for use on public roads and can only be used off road.
2. Do not look directly into the light source during operating due to the extremely light output.
3. Do not mount the lights in any location that obstructstheviewofthe driver; install iton location/devices which are designed for such purpose.
4. Profes,ional installation is recommended.
5. Ensure that installation will not interfere with existing vehkle systems, airbag system sensors, foiward and signal lighting, etc.
6. Ensure adequate clearance exists betw€en the light and its wiring, between any moviig or rotating parts of the vehkle (e.g., tires/wheels, suspension, doors, etc.).
7. Ensure the light is mounted ata safe distance from temperature-sensitive objects. Do not route wires along or near hot, sharp, or moving surfaces that might damage the wiring.
8. When laying out wire routing, stay clear of radio ante ma and wiring to minimize radio interference.
9. Only operate under the specified voltages as mentioried in the specifkations. 10. Use appropriately sized switches, wires, and circuit fusing.
10. Do not open the product and do not make any modifkations to the lamp or cables; for any defective/malfunctioning devkes, please contact our aftersales service. 1
11. The light becomes very hot during operation and remains hot after use. Do not touch the light when hot 13. Do not dean with flammable substance or cover by flammable materials

UD5001R

UD2001R

Discarded electrical products must not be disposed together with household waste. Please use recycling facilities. Contact your local authority or retailer for advice on recycling.

UD5001 Rand UD2001 R

If an additional pair of position lights is not permitted, the position light should be disconnected. The legal regulations in individual countries must be observed.

UD5001R

Following local regulation requirement for wiring

UD2001R

Following local regulation requirement for wiring

WARRANTY

Lumileds is the warrantor of this product. 2022© Lumileds Holding B.V. All rights reserved.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>