midmark 003-10560-00 ECG Machine User Guide

: July 30, 2024
: Midmark

Table of Contents

003-10560-00 ECG Machine
Product Information
Specifications
Product Usage Instructions
1. Patient Preparation
2. Electrode Placement
3. Conducting the Test
- Frequently Asked Questions (FAQ)
Q: How long should I wait for ECG tracings to stabilize before
Q: What should I do if there is artifact in the ECG

003-10560-00 ECG Machine

“`html

Product Information

Specifications

Manufacturer: Midmark Corporation
Model: ECG Machine
Country of Origin: USA
Contact for Support Services: 800.624.8950, press #2
Website: www.midmark.com

Product Usage Instructions

1. Patient Preparation

Proper patient preparation is crucial for accurate results.
Follow these steps:

Prepare the patient for the test by ensuring they are in a
relaxed state in a supine position.
If needed, shave any hair from electrode sites and clean the
skin with mild soap and water. Let it air dry.

2. Electrode Placement

Follow these steps for proper electrode placement:

Adhere electrodes on the patient as indicated in the provided
diagram.
Attach the ECG clips from the patient cable to the electrodes
according to the color coding.

3. Conducting the Test

Select the ECG button on the machine and enter Technician,
Physician, and Indication details.
Choose the appropriate ECG Lead Group and wait for ECG tracings
to stabilize.
Select the Analyze button to save the ECG data.
Select the Review button to either Exit or Print the
results.

Frequently Asked Questions (FAQ)

Q: How long should I wait for ECG tracings to stabilize before

analyzing?

A: Wait for the ECG tracings to pass twice, which usually takes
around 20 seconds, and ensure the patient’s baselines are
stabilized before selecting the Analyze button.

Q: What should I do if there is artifact in the ECG

readings?

A: Proper patient preparation, including shaving hair from
electrode sites and cleaning the skin, is essential to minimize
artifact. Ensure electrodes are properly adhered and connected to
reduce interference.

“`

Quick Reference Guide

Midmark® Digital ECG

01 In IQmanager®, Select a patient from the Patient List or Select New Patient and enter demographics and vital signs. (Patient’s date of birth and sex must be correct.)

07 Select the ECG button. Enter Technician, Physician and Indication. Choose the appropriate ECG Lead Group. Select OK.

02 Prepare the patient for the test. NOTE: Proper patient preparation is essential for minimized artifact, a clean ECG and accurate results.

08 Wait for ECG tracings to pass twice (~20 seconds) and the patient’s baselines are stabilized. Select the Analyze button. (The ECG will be saved.)

a. Shave hair (if necessary) from electrode sites. (Refer to the opposite side of this card for proper placement.)

09 Select the Review button. Select Exit or Select Print and then Exit.

b. Clean skin with a mild soap and water. Let air dry.

03 Adhere electrodes on the patient.

04 Attach the ECG clips from the patient cable to the electrodes according to color coding.

05 Instruct the patient to relax in a supine position.

06 Select the New Test button.

RA

LA

RL

LL

Limb Lead Placement
RA (White) Right lateral side of the upper arm below the shoulder
LA (Black) Left lateral side of the upper arm below the shoulder
RL (Green) Inside calf, midway between knee and ankle
LL (Red) Inside calf, midway between knee and ankle

12 3 4 56

Mid Anterior

Clavicular Axillary

Line

Standard 12-Lead Placement (Precordial)

1 V1 (Red) Fourth intercostal place at the right margin of the sternum 2 V2 (Yellow) Fourth intercostal place at the left margin of the sternum 3 V3 (Green) Midway between V2 and V4 (on top of the 5th rib) 4 V4 (Blue) Fifth intercostal place at the left midclavicular line 5 V5 (Orange) At the horizontal level of V4, at the left anterior line 6 V6 (Purple) At the horizontal level of V4, at the midaxillary line

Midmark Corporation | 60 Vista Drive, Versailles, OH 45380 USA | Support Services 800.624.8950, #2 | midmark.com

003-10560-00 Rev AB2 Style M