LANDMANN 28051 Heatwave Fire Pit Grill Instruction Manual

Landmann 28051
Owner’s Manual

28051 Heatwave Fire Pit Grill

This Owner’s Manual is provided and hosted by Appliance Factory Parts.
Shop genuine replacement parts for Landmann 28051
Find Your Landmann Grill Parts – Select From 200 Models
——– Manual continues below ——– Assembly and Use
Instructions for Model:
28051
VER. 2, 1/12/2017

PLEASE READ ALL INSTRUCTIONS, ALL SAFETY INFORMATION AND HELPFUL HINTS BEFORE USING.

Safety Information

PRECAUTION
Use caution and common sense when using your outdoor fireplace.
Failure to adhere to the safety warnings and guidelines in this manual could result in bodily injury or property damage. Save this manual for future reference.
WARNING: This outdoor fireplace is for outdoor use only.
WARNING: Use only on brick, concrete, stone or other masonry surfaces.
WARNING: Do not use on lawns, wooden decks, artificial wood decking or asphalt.
WARNING: Keep the outdoor fireplace a minimum of 10 ft. away from buildings, structures, any flammable items and vehicles.
WARNING: Never use under low hanging tree branches, trellises, overhangs of any kind including covered porches.
WARNING: Never use gasoline, alcohol or volatile fluids to start or restart fires.
WARNING: For longer product life, keep fires to a respectable size, do not overload.
WARNING: The outdoor fireplace is for adult use only.
WARNING: The wood grate must be used at all times.
WARNING: Do not leave unattended at any time during use.
WARNING: Do not move the fireplace during use.
WARNING: Do not use in windy conditions.
WARNING: Do not overload or use for burning garbage.  Do not use more than 5 Ibs. of firewood in the firebowl.
WARNING: Never bum wood or charcoal directly on the cooking grate. The cooking grate is used for grilling food only. Remove cooking grate when not grilling food.
WARNING: Use caution when tending the fire, as surfaces will become very hot while in use.
WARNING: Keep the spark guard in place while using as a fireplace.
WARNING: Use mittens or gloves to remove the lid, the lid and handle will become very hot.
WARNING: Use caution when removing the lid, as hot steam or a flare up could cause burns.
WARNING: Before each use make sure the outdoor fireplace is in good working condition.
WARNING: Use caution after the fire has been extinguished. Surfaces will remain hot for some time.
WARNING: The outdoor fireplace must be completely cooled off and all embers must be extinguished before any cover can be used.
WARNING: CARBON MONOXIDE HAZARD! Burning wood or charcoal produces carbon monoxide, which has no odor and can cause death if burned in enclosed areas. Never burn wood or charcoal inside homes, vehicles, tents or any other enclosed areas.
WARNING: Fuels used in wood or charcoal burning appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Parts List

Hardware

TOOLS REQUIRED HARDWARE INCLUDED
NOTE : Hardware not shown to actual size.

Assembly

Assembling the firebowl handle

1. Assemble the firebowl handle (T1) to the front of the firebowl (E1) using two bolts (AA), two hexnuts (BB) and two washers (DD).
   Assemble the bolts and washers from inside the firebowl. Tighten bolts securely.

2. Assembling the front legs
   Assemble the two front legs (L1) to the firebowl (E1) using four bolts (AA), four washers (DD) and four hexnuts (BB). Finger tighten the bolts only at this time.

3. Assembling the bottom shelf
   Assemble the bottom shelf (Y) into the front legs (L1) using two capnuts (CC). Finger tighten the capnuts only at this time.

4. Assembling the wheel legs
   Insert the right and left wheel legs into the bottom shelf axle. Assemble each leg to the firebowl using two bolts (AA), two washers (DD) and two hexnuts (BB). Tighten the bolts and capnuts from Steps 2 and 3.

5. Assembling the wheels
   Assemble the two wheels (H1) to the bottom shelf axle (Y) using two locknuts (EE). Tighten hexnuts securely.

6. Assembling the firebowl handle shield
   Assemble the firebowl! handle shield (U) to the handle (T1) using two bolts (AA) and two hexnuts (BB).

7. Assembling the spark screen panels to form the spark guard
   Assemble the four spark screen panels (C1) together using sixteen bolts (AA), sixteen hexnuts (BB), four lid tabs (D1) and four screen brackets (X). Make sure the lid tabs and screen brackets are assembled on the inside of the spark guard. The lid tabs should point toward the outside. Adjust each panel so there are no gaps between the frames before tightening the bolts securely.

8. Placing the spark guard and wood grate on the firebowl
   Place the wood grate (J) on the bottom of the firebowl. Place the assembled spark guard onto the firebowl.

9. Assembling the lid handle and lid hook
   Assemble the handle (A1), lid hook (W) onto the lid (B) using two bolts (AA) and two hexnuts (BB).

10. Placing lid on the spark guard
    Place the lid onto the spark guard and tabs. Press onto the lid tabs.

11. Adding sand
    Before using add a 1-1.5 in. layer of sand or about 5 Ibs. (size wise, it’s the same amount as a 5 Ib. bag of sugar) to the bottom of the firebowl. This will help against the corrosive nature of the ashes and help radiate the heat upwards.

DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY,PLEASE CALL 1-800-321-3473 FOR ASSISTANCE.

How to Use

Usage of lid hook

• The lid hook can be used to hang the lid on the spark guard when adding firewood or tending the fire.

Adding fuel
Add up to 5 Ibs. of kindling and firewood to the wood grate. Use paper or firestarter under the kindling and light with a match. Add more firewood as needed. The capacity of the fire pit is 5 Ibs. of fuel. Using the cooking grate

• Remove the lid and spark guard. Place the cooking grate on the firebowl.

HELPFUL HINTS

• ADDING 5 LBS OF SAND TO THE BOTTOM OF THE FIREBOWL WILL EXTEND THE FIREBOWL LIFE.
• KEEP OUT OF THE WEATHER AND ELEMENTS.
• STORE IN A DRY LOCATION OUT OF THE WEATHER.
• DO NOT LET THE FIREBOWL FILL WITH WATER.
• DO NOT DUMP ASHES WHERE THEY COULD START A FIRE.
• DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE COOLED.

HELPFUL HINTS FOR THE PORCELAIN LID AND FIREBOWL
Porcelain finishes are very durable and provide excellent resistance to heat.
Proper care will provide many seasons of carefree use. Follow these rules for long life.

• Do not drop the lid on the ground, this will cause the porcelain finish to chip.
• Avoid excessive poking, rubbing or striking to the porcelain finish as it will cause chipping.
• Do not pour water directly onto a hot firebowl or lid, this could cause the porcelain to chip, craze or pit.
• The porcelain finishes can be cleaned with a mild cleaner and a strong stream of water.

Congratulations on your purchase of the Heatwave Outdoor Fireplace! At Landmann USA, we strive to provide you with an easy to use, easy to assemble product. However, in the unlikely event your package should have a missing or defective part, please contact us at: customerservice@landmann- usa.com
-OR-1-800-321-3473 M-F 8-5 ET.
Proof of purchase may be required. Thank you!

Landmann® Limited
Distributed by Landmann® USA Fairburn, GA 30213
www.landmann-usa.com
Made in China
© 2016 Landmann® USA
Downloaded fromwww.Mamualslib.com manuals search engine

References

• USA Location information - USA.com
• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Landmann Grill Parts - Select From 200 Models

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>