ITC VPH Vi Desktop and Tabe Phone charger User Manual
- June 1, 2024
- ITC
Table of Contents
ITC VPH Vi Desktop and Tabe Phone charger
Product Information
Specifications:
- Product Name: ViTM Desktop and Table Phone Charger
- Part Number: VPH
- Electrical Ratings: 24V AC | 1.2A
- Charging Capacity:
- Wireless: Up to 10W
- USB-A – 5V / 2.4A / 12W
- USB-C – 5V, 9V, 12V, 20V / 3A / Max 60W
Product Usage Instructions
Desktop Version:
- Place the charger in the desired location on the desk.
- Plug the charger into the power supply.
- Connect the other cord to the power supply.
- Plug the cord into the wall outlet.
Table Mount Version:
- Select a suitable location and place the charger portion on top of the work surface.
- Slide the bracket and knob under the surface and tighten it securely.
- Plug the charger into the power supply.
- Connect the other cord to the power supply.
- Plug the cord into the wall outlet.
FAQ
Q: What should I do if the device is not charging properly?
A: If the device is not charging properly, try using a different power
outlet or check if all connections are secure.
Q: Can I use this charger for devices with different voltage
requirements?
A: Yes, the USB-C port supports multiple voltage options to accommodate
various device requirements.
PARTS NEEDED
IMPORTANT SAFETY INSTRUCTIONS
Interior use only.
Electrical ratings:
24V AC | 1.2A
Charging Capacity: Wireless: Up to 10W
USB-A – 5V / 2.4A / 12W
USB-C – 5V, 9V, 12V, 20V / 3A / Max 60W
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. The equipment should be installed and operated with
minimum dis- tance 15cm between the radiator & your body.
FCC VOC
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a partic- ular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions.
INSTRUCTION
-
Desktop Version
Place in desired location on the desk and plug the charger into the power supply. Plug the other cord into the power supply and then plug into the wall. -
Tabe Mount Version:
Select location and place the charger portion on top of the work surface. Slide the bracket and knob under the surface and tighten until secure to the surface.
Plug the charger into the power supply. Plug the other cord into the power supply and then plug into the wall.
3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return- policy DOC #: 710-00227 • Rev A • 07/12/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>