TITAN 38109 Smart Watch User Manual
- June 15, 2024
- Titan
Table of Contents
TITAN 38109 Smart Watch
- Thank you for choosing the 38109 smartwatch as your fitness transformation companion.
- Allow this manual to guide you through the functioning of your smartwatch.
- Please read it thoroughly before using your smartwatch. Keep this manual for your step-by-step guide.
PACKAGE CONTAINS
- One (1 ) 38109 Smartwatch
- One (1) USB Magnetic Charging Cable
- One (1) User Manual
- One (1) Quick Start Guide
CHARGING THE WATCH
The smartwatch must be charged before initial use. It takes up to 2 hours to
be fully charged. Connect and charge the watch with the image below as a
reference, using a 5V/2A adapter.
TURNING THE WATCH ON/OFF
To turn the watch on/off, long—press the side button for 3—5 seconds. You can
also wake up the screen by lifting your wrist.
CONNECTING TO THE APP
- Download the APEX WEAR app on your phone, available on both the App Store (iOS 13.0 and above) and Google Play Store (Android 6.0 and above) or scan the QR Code here. You may also find it on your watch.
- Connect your smartwatch with the Apex Wear app.
- Select 38109 smartwatch on the home screen and click pair to connect.
- To use and explore all the features, tap “YES” when the ‘connection” and “grant access” system prompts.
- Turn on your phone’s Bluetooth and GPS. To turn it on, go to phone settings, then find “Bluetooth” and then turn on or find Privacy > Location.
- Disable battery optimization.
Note:
To ensure connectivity throughout your journey, make sure the app is allowed
to run in the background of your phone at all times. iPhones will not prompt
any information unless you complete the Bluetooth pairing with the 38108
smartwatch.
SYNCING YOUR SMARTWATCH TO THE APP
- Data Synchronization:
- Open the app on your phone.
- Make sure your smartwatch is connected; refer to
- “CONNECTING TO THE APP” section of this manual.
- Synchronization will start automatically once you enter the app interface.
Note:
Synchronize data at least once every day to avoid data loss in the watch.
NAVIGATING THROUGH THE FUNCTIONS
SWIPE FROM RIGHT TO LEFT TO ACCESS THE MAIN MENU Workout
Workout
Choose from multiple sports modes like outdoor run, outdoor walk, indoor walk,
outdoor cycle, indoor run, hike, exercise, indoor cycle, elliptical, yoga,
climbing, trail run, and rowing.
Tap on any sports mode to start the activity. Press the side button to pause
or stop the activity. If the activity is less than 3 minutes, it will not be
recorded. Sync your smartwatch to the app to get a detailed analysis.
Record
It shows all your workout records.
Heart Rate Monitor
Wear the watch on your wrist, then click on the icon to start measurements.
You can also view the data on the app.
Phone
To use the BT Calling feature, open Apex Wear app and pair the watch. Once
paired you will get the pop—up on the app home screen to connect with the
Phone’s Bluetooth. Click on ‘pair’ to connect with the phone’s
Bluetooth.Alternatively, you can go to the phone’s Bluetooth settings and pair
‘G13 Smart Watch’ to start the calling feature on your watch. You can also
enable the Bluetooth calling feature from the watch.
Note: Enable call alerts from your phone settings to answer calls on your
watch. When the APP is enabled, the contact book can be authorized to obtain
the registered contact list which can be synchronized to the watch later on.
Up to 20 contacts can be saved in the contact book. The latest call details
are displayed in the recent calls feature. When the watch is connected to the
app, you can use the dial function on the watch to dial any number.
Stress monitoring
Click this option to start the stress monitoring. Make sure you wear your
watch on your wrist properly to get accurate results. Analysis of the
measurement is
- Relax: 1-29
- Normal: 30-59
- Medium: 60-79
- High: 80-1 OO
Note: Measurements are for reference only and not for medical purposes.
Sp02 monitoring
Wear the watch on your wrist, then click on the icon to start measurements.
You can also view the data on the app.
Note: Measurements are for reference only and not for medical purposes.
Activity
Click on this to check your daily activity data like step count, calories and
distance covered.
Breath
Click on the breath training icon to regulate your breathing with the
instructions given to relax.
Notification
Swipe from left to right to see your phone notifications such as SMS and app
notifications.
Sleep Monitor
Tap on the icon to review the sleep data from the previous night.
The default watch setting is to detect the user’s sleep during the whole day.
Once you lie down, the watch detects reduced /No movement and if it meets the
sleep patterns it will start recording and will stop recording if it detects
excessive movement. You can check the data on the app only after the awake
criteria is met. You can also track sleep scores on the Apex Wear app.
Note
*For accurate sleep data recording, the sleep criteria have to be met which includes limited movement, wrist positions and angles, and more. The awake criteria will be met only after it records some noticeable movement.
Weather
Connect with the Apex Wear app to view the weather on the watch. Swipe from
right to left on the watch’s home screen and scroll down to find the weather.
Alarm
Swipe from right to left on the watch’s home screen and scroll to find the
alarm setting.
Timer
Swipe from right to left from the watch’s home screen and scroll down to find
the timer setting.
Music Control
Swipe right to left from the watch’s home screen and scroll down to find the
music control function. From here you can control the music that is playing on
your phone. You can play, pause, skip songs and adjust the volume.
Note: Some apps with different protocols might not work.
Camera Control Mode
Tap on the remote camera icon on your smartwatch to click a photo from your
phone.
*Note: It doesn’t connect directly with phone’s native camera. Please
open Apex Wear app, go to “Device” page and find “Take a picture” and then
click on it to use this feature.
Stopwatch
Swipe right to left from the home screen on the watch then scroll down to
access the stopwatch function.
Find My Phone
Swipe right to left from the home screen of the watch then scroll down to find
the “Find My Phone” function. Once you tap start, your phone will start
ringing. Tap again to stop.
Note: Your smartwatch should be connected to your phone via Bluetooth and
within its range for this feature to work.
Settings
Note: Either swipe down from the home screen on the watch and tap the
gear icon, or swipe right to left from the home screen of the watch and scroll
down to find the settings option
Brightness
Tap on this to adjust the brightness.
Timeout
Adjust the time that your watch screen stays active.
Watchface
More watch faces are available to download through the app.
In the Apex Wear app, go to the “Device” page and find “watch face” and then
click on more to choose from a large selection of watch faces.
Vibration
Tap on this to adjust the vibration to strong, normal, weak or off. It can
also be adjusted in the APP
Time Set
The time and date is set automatically once you pair the watch with your
phone. However in case you would like to adjust the time and date manually,
you can do so in the settings of the watch. You can also adjust the time
format here between 12h or 24 hours.
About
Shows the device details.
QR code
Scan the QR code to download Apex Wear app.
Restart BT
It restarts the watch’s BT to ensure better connectivity for BT calling
feature.
Power off
Tap on this to switch your watch off.
Reset
Tap on this to reset watch data.
*Note: All data will be erased if watch is reset.
Swipe up to access data instantly
You can access Daily Activity, Heart Rate, Weather, Music Control, Sleep
from here.
Swipe down for shortcut menu
You can access Do not disturb, Wake gesture BT calling, Find my phone, Flashlight, i About device Phone menu and Settings. Swipe from left to right for notifications You can check all the notifications from here. Click delete icon to delete all the notification.
Swipe from left to right for notifications
You can check all the notifications from here. Click delete icon to delete all
the notification.
Swipe from right to left to access feature menu You can access all the feature
list from here.
Additional functions in the app
Notifications
Select specific notifications you would like to turn off (i.e. Facebook,
Twitter, WhatsApp and etc.)
Do Not Disturb
Set do not disturb for specific periods of time.
Address Book Select up to 20 contacts from phone contact list and save to
watch.
PRODUCT PARAMETERS
- Model: 38109
- Screen type: 1.91 ” HD Display
- Battery capacity: 270mAh
- Net weight: 40g
- Bluetooth version: Bluetooth’ 5.2
- Working temperature: 0-450
- Charging time: 2 Hours
- Working time: 7 Days
- Water resistance: IP68
- Frequency band: 2400 – 2483.5MHz
MAINTENANCE
- Regularly clean your wrist and the strap of the smartwatch, especially after sweating during exercise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product.
- Do not wash the strap with a household cleanser. Please use soap less detergent, rinse thoroughly and wipe with a piece of soft towel or napkin.
- For spots or stains that are not easy to remove, scrub the area with rubbing alcohol and then follow the above procedure.
FAQ
Search for the app to connect keeps failing
- Keep Apex Wear app updated to the latest version.
- Close all the programs on the watch —> Stop and restart Bluetooth and GPS—> Connect again.
- Check and enable notification functions of your phone and keeßhe phone and watch in close contact.
Note: Make sure your phone system meets Android 7.0 and above and iOS
13.0 and above.
My 38109 Smartwatch is receiving no alerts, texts or phone calls
Make sure smart reminders on the app are on and synced to the 38109
smartwatch. Also make sure your notification center of the phone is displayig
messages. Only then will your smartwatch also display those notifications.
Make sure app is running in the background and battery optimization feature on
the phone is disabled,
My Bluetooth keeps getting disconnected
- Make sure there is not more than 30′ (9.1 m) distance between Bluetooth on the phone & the watch.
- There is no obstacle in between the watch and the phone.
- Make sure the app is running in background.
Which functions of the 38109 smartwatch need Bluetooth to work?
Call & Text Notifications, Find My Phone, Music control, Cameræontrol, Weather
forecast,
Cloud and custom watch faces need Bluetooth connectivity to work.
Will it be okay to take a bath wearing the 38109 smartwatch?
The IP68 water resistance will only work under the following conditions;
- Maximum depth of water: 39″ (1m)
- Maximum time for exposure to water: 30 minutes
The watch Isn’t suitable for hot baths, hot springs, saunas, snorkeling, diving, water skiing and other wading or deep—water activities with high—speed water flow
SAFETY & PRODUCT INFORMATION
Battery
- Do not disassemble, bore or damage the battery.
- Do not disassemble the built in batteries of non—replaceable battery devices.
- Do not use sharp objects to remove the battery
Health Warning
- If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch.
- The optical heart rate sensor will glow green. If you suffer 16m epilepsy or are sensitive to blinking light sources, please consult your physician before wearing this device.
- The device tracks your daily activities through sensors. This data is intended to tell you about your daily activities such as steps, sleep, distance, heart rate and calories, but may not be completely accurate.
The device accessories, heart rate sensor, oxygen level monitor, and other relevant data is designed for fitness and not for medical purposes. They are noepplicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate and blood pressure data is for reference only. We’re not responsible for any deviation in data. Avoid wearing the watch too tightly. Make sure you keep your skin dry — the area that comes in contact with the watch. If symptoms such as redness or swelling appear on your skin, immediately stop using the watch and consult the doctor.
Things to keep in mind
- Sync data everyday days to avoid data loss.
- Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents & other corrosive liquid. The damage or defects caused by mists or improper use are not covered by the warranty.
- Sports modes support up to 6 hours Of exercise at a time.
- Avoid wearing the watch too tight in daily use. Keep the parts of skin touching the watch dry.
- Keep your arm still while measuring data for accurate measurement.
Disclaimer: This product is an electronic monitoring product and is not intended as a medical reference. We reserve the right to modify or improve any of the functions described in this manual without any prior notice. At the same time, we hold the right to continuously update the product content.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBSITUTE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. Withltis little personal effort, you contribute to
recycle valuable raw materials and treatment of toxic substances.
IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license—exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1 ) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following rneasures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>