RheoFit A1 Auto Roller User Manual
- August 22, 2024
- RheoFit
Table of Contents
RheoFit A1 Auto Roller User Manual
Packing List
Auto-Roller1 Charger Cable1 Replaceable Cover1 Charger 1(Optional)
Functional Area
- Handle
- Multi-function Button
- Hand-wave Sensor
- Indictor Light
- USB-C
Indicator Light
Power On
Charging (flashing)
Fully Charged
Operating Instructions
Press and hold the multi-function button for 2 seconds to turn on, press and hold it again for 2 seconds to turn off.
Double-click the multi-function button to enter the Fast Massage Mode and rolling back and forth within a certain range.
The hand-waving sensor on the side can stop the roll press instantly in any mode.
Change the Massage Cover
The massage cover of the Yunwang rolling press device adopts a quick release design. Find the groove, pull up one corner of the massage cover, and then remove the entire side, the same goes for the other side.
hen installing the massage sleeve, first press one side of the massage sleeve into the slot, and then press the other side of the massage sleeve into the installation slot from the middle to both sides.
Bluetooth Connection
After booting up, click on “Add Device” in the WeChat mini program. After the
device card appears, click to automatically connect. A successful connection
will redirect you to the control page.
Product Three Guarantees Service Regulations
-
The three-guarantee service period starts from the date of urchase and is subject to the date of invoice issuance.
-
The three-guarantee service period of the product: the product is guaranteed to be returned or exchanged within 14 days, and the warranty is within 180 days. The accessories provided with the product are not covered by the warranty.
-
If the product is under normal use and maintenance during the three-guarantee period, any failure caused by the components of the machine will be inspected and confirmed by the dealer’s technical pfirsonnel, and spare parts can be repaired and replaced free of charge.
-
Thge above warranty content is limited to the services provided during the three-guarantee period as written in the three-guarantee service regulations. If you have any questions, please contact the dealer within the corresponding time.
-
The following situations are not within the scope of the three guarantees:
-
Non-genuine;
-
The three-guarantee validity period has exceeded, the three-guarantee voucher has been altered, the serial number does not match the order number, and the product itself has no serial number;
-
All damages caused by human factors, including but not limited to damage caused by use under abnormal circumstances, failure to use and store according to the instructions, etc.;
-
The user has dismantled the machine without permission, repaired or modified it by himself, or repaired it by a unit not authorized by the manufacturer, without a warranty card and valid documents;
-
Damage caused by force majeure; .
-
Failures caused by transporting the machine by yourself after purchasing it or using it 1n harsh environments (smoke, heat, dust, liquids, etc,).
-
The manufacturer is not responsible for the user’ s special, accidental or indirect losses.
-
Products that have been discontinued may not be repaired due to insufficient accessories. In this case, products within the warranty scope are allowed to be replaced with other products of equal value.
Repair services will not be provided for products not within the warranty scofpe. ! . 8. The manufacturer is not legally resPon31ble for damage caused by improper use of the product or loss of the user’s property, or injury to the user’s body or muscles caused by incorrect use of the product. -
The manufacturer reserves the right to interpret all regulations in this Three Guarantees Service Regulations.
-
When it is necessary to send the product and its packaging box for repair, send or mail the product and its packaging box together with the completed warranty card and proof of purchase (such as invoice, receipt) to the manufacturer’s designated area for repair service. The transportation fee shall be borne by the user.
Note
- Please keep the product away from electromagnetic environments; Stay away from harsh environments such as excessive humidity and smoke and dust;
- The device is prohibited from being immersed in water; Do not use anlsg corrosive or abrasive cleaning agents to clean this machine;
- Please do not use excessive force to squeeze the product;
- Please do not violently shake or impact the product;
- The lifespan of batteries may vary depending on usage conditions and production time;
- Improper use of the product may cause injury. Please do not use this product to massage vital parts of the body. Our company is not legally responsible for bodily injury caused by improper use of the product.
WARRANTY CARD
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.